docs: remove retired workflow instructions and repair references

phases/shell-surface-pressure-load/step4.md

@@ -1,5 +1,8 @@
 # Step 4: integrate-linear-shell-pressure
 
+> 과거 개발 계획이다. 아래 작업·상태·예시는 현재 실행 지시가 아니다.
+> 현재 구현과 검증 한계는 [기능 요약](../../docs/shell-surface-pressure-load/README.md)을 따른다.
+
 ## 실행 범위와 상태 소유권
 
 이 Step의 single responsibility는 Step 3 local evaluator를 deterministic full-space pressure assembler와 linear-static reference-configuration path에 연결하고 existing schema-0/CLI/reaction/equilibrium behavior를 검증하는 것이다. Nonlinear follower procedure는 Step 5 범위다.
@@ -9,17 +12,17 @@ Complete test-first RED, expected failure, minimal GREEN and focused VERIFY in t
 ## 읽어야 할 파일
 
 - `AGENTS.md`
-- `docs/ARCHITECTURE.md`
-- `docs/ADR.md`
-- `docs/CODINGSTYLE.md`
-- `docs/HARNESS.md`
-- `docs/HARNESS_WORKFLOW.md`
+- `../../docs/solver-core/README.md`
+- `../../docs/solver-core/README.md`
+- `../../docs/solver-core/README.md`
+- `../../docs/solver-core/README.md`
+- `../../docs/solver-core/README.md`
 - `.codex/hooks.json`
-- `docs/shell-surface-pressure-load/requirements.md`
-- `docs/shell-surface-pressure-load/formulation.md` §§9, 11–14
-- `docs/shell-surface-pressure-load/numerical-review.md` §6
-- `docs/shell-surface-pressure-load/io.md` §§6–7, 9–10
-- `docs/shell-surface-pressure-load/implementation-plan.md`
+- `../../docs/shell-surface-pressure-load/README.md`
+- `../../docs/shell-surface-pressure-load/formulation.md` §§9, 11–14
+- `../../docs/shell-surface-pressure-load/README.md` §6
+- `../../docs/shell-surface-pressure-load/README.md` §§6–7, 9–10
+- `../../docs/shell-surface-pressure-load/README.md`
 - Prior semantic outputs: `include/fesa/model/model_types.h`, `include/fesa/model/domain.h`, `src/fesa/model/domain.cpp`, `include/fesa/analysis/analysis_model.h`, `src/fesa/analysis/analysis_model.cpp`
 - Prior evaluator outputs: `include/fesa/loads/shell_surface_pressure.h`, `src/fesa/loads/shell_surface_pressure.cpp`, `tests/unit/loads/shell_surface_pressure_test.cpp`
 - `include/fesa/assembly/load_assembler.h`
@@ -101,15 +104,7 @@ Write/register first:
 
 Run before production implementation:
 
-```powershell
-cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
-  "-DFESA_GTEST_SOURCE_DIR=C:/git/googletest" `
-  "-DMKL_DIR=C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl" `
-  "-DTBB_DIR=C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb" `
-  "-DHDF5_DIR=C:/Program Files/HDF_Group/HDF5/2.1.1/cmake"
-cmake --build .harness/build --config Debug --target fesa_unit_tests fesa_integration_tests
-ctest --test-dir .harness/build -C Debug --output-on-failure -R "^(SurfacePressureAssembly|LinearShellSurfacePressure|ShellSurfacePressureApplication)\."
-```
+과거 도구 실행·출력 지시는 정리했으며, 현재 검증 방법은 기능 요약을 따른다.
 
 Expected RED: assembler compile/link failure, or linear procedure assembles only CLOAD so pressure resultant/reaction remains zero and pressure CLI assertions fail. Record command, exit, duration and output tail. Unexpected pass is evidence-gap; unrelated failure is regression.
 
@@ -125,14 +120,9 @@ Expected RED: assembler compile/link failure, or linear procedure assembles only
 
 ## VERIFY and Acceptance Criteria
 
-Use `.harness/config.json` first if present; otherwise:
+Use 과거 검증 자료(정리됨) first if present; otherwise:
 
-```powershell
-cmake --build .harness/build --config Debug --target fesa_unit_tests fesa_integration_tests
-ctest --test-dir .harness/build -C Debug --output-on-failure -R "^(SurfacePressureAssembly|LinearShellSurfacePressure|ShellSurfacePressureApplication)\."
-ctest --test-dir .harness/build -C Debug --output-on-failure -R "^(LoadAssembly|SparseAssembly|LinearStaticCli|Mitc4ShellCli|Hdf5ResultsWriter)\."
-ctest --test-dir .harness/build -C Debug --show-only=json-v1
-```
+과거 도구 실행·출력 지시는 정리했으며, 현재 검증 방법은 기능 요약을 따른다.
 
 위 targeted build, focused feature/regression tests와 nonzero discovery evidence를 기록한 뒤 Step status/summary를 갱신하고 agent turn을 종료한다. Implementation Agent는 target 없는 whole-project build 또는 unfiltered full CTest를 실행하지 않는다. Automatic Stop hook이 exactly one whole-project MSVC x64 Debug build/full CTest를 수행한다.
 
@@ -163,4 +153,3 @@ Trace: `FESA-REQ-SHELL-PRESSURE-005`–`007`, `010`–`013`, `016`–`020`; io
 - Do not refactor existing load hierarchy beyond the new pressure assembler or expose MKL/TBB/HDF5 in public core.
 - Do not modify upstream docs, tolerance/reference artifacts or Abaqus files.
 - Do not run Abaqus, create output JSON, invoke Executor, advance Step 5, commit or push.
-