fix: preserve implementation step boundaries

.codex/agents/implementation-agent.toml

@@ -60,21 +60,29 @@ Execution contract:
   later pending Step.
 - Execute this recipe within the current Step: approved plan + materialized phase files +
   Executor-selected current `stepN.md` -> read prerequisites and previous summaries -> RED ->
-  OBSERVED FAILURE -> MINIMAL GREEN -> FOCUSED VERIFY -> FULL MSVC BUILD/CTEST -> ARTIFACT CHECK
+  OBSERVED FAILURE -> MINIMAL GREEN -> the Step's declared FOCUSED/FULL VERIFY acceptance commands
-  -> COMPARE -> CLASSIFY -> REPORT -> update only current Step status plus
+  -> update only current Step status plus
   `summary`/`error_message`/`blocked_reason` -> stop without starting the next Step.
+- A non-final Step is complete when its declared acceptance commands pass. It must not fail merely
+  because final solver output, reference artifacts, or `reference-comparison.md` are not yet available.
+- Only when the approved implementation plan places the Executor-selected current Step after all
+  prerequisite implementation Steps as the final Implementation-owned verification Step/gate,
+  continue with `ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT`, require generated `results.h5`,
+  and complete `docs/<feature-id>/reference-comparison.md`.
 - Always work in RED -> GREEN -> VERIFY order.
 - RED: write the planned C++ unit, integration, parser/I/O, or reference-comparison test first.
 - RED: run the targeted test and verify failure before production implementation.
 - GREEN: implement the minimum code needed for the planned task and acceptance criterion.
-- VERIFY: resolve commands from `.harness/config.json` first, then Harness project defaults; run the targeted CTest command, then the full MSVC x64 Debug build/test commands in the configured order.
+- VERIFY: resolve commands from `.harness/config.json` first, then Harness project defaults; run the
+  targeted command and any focused/full MSVC x64 Debug build/test commands declared by the current
+  Step in the configured order.
 - VERIFY: record RED and GREEN evidence explicitly; PreToolUse only checks that a related test file exists.
 - VERIFY: allow Stop to rerun whole-project MSVC build/test before the Step ends.
 - BUILD/TEST REPORT: record command, exit code, duration, stdout/stderr tail, failed test names, environment, and project-selection path in `docs/<feature-id>/build-test.md` with `owner_agent: implementation-agent`.
 - BUILD/TEST REPORT: stop after the first decisive failure unless the approved plan requires another diagnostic command.
-- ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT: require the exact declared input/CSV paths, generated `results.h5`, HDF5 projection from `docs/<feature-id>/io.md`, source identity/component matching, row uniqueness/finite checks, and approved tolerance.
+- FINAL VERIFICATION GATE — ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT: require the exact declared input/CSV paths, generated `results.h5`, HDF5 projection from `docs/<feature-id>/io.md`, source identity/component matching, row uniqueness/finite checks, and approved tolerance.
 - COMPARE: reject missing, extra, duplicate, or nonfinite required rows before tolerance; preserve warning-only behavior and never alter tolerance or artifacts to obtain a pass.
-- REPORT: write `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and `docs/<feature-id>/reference-comparison.md`.
+- FINAL VERIFICATION GATE REPORT: complete `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and `docs/<feature-id>/reference-comparison.md`.
 - `.codex/hooks.json` is authoritative: PreToolUse runs `scripts/hooks/pre_tool_use.py` and Stop
   runs `scripts/hooks/stop_validation.py` automatically. Hooks do not prove RED, and their Python
   entry points must not be manually invoked as substitutes for registered hooks.
@@ -139,7 +147,11 @@ Reference comparison quality gate:
 - Do not calculate, invent, or treat a metric as required when the approved feature contract does not make it applicable.
 
 Return contract:
-- Return `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and `docs/<feature-id>/reference-comparison.md`, plus status, evidence summary, and blockers, to Coordinator Agent.
+- For a non-final Step, return only that Step's owned status/summary and applicable evidence without
+  requiring final solver output or a completed reference comparison.
+- From the final Implementation-owned verification Step/gate, return
+  `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and
+  `docs/<feature-id>/reference-comparison.md`, plus status, evidence summary, and blockers, to Coordinator Agent.
 - Return `pass-for-physics-evaluation` only when the full build/test and all blocking comparisons pass.
 - Return repeated or unclear implementation failures as a Correction Agent request through Coordinator Agent.
 

.codex/skills/fesa-cpp-msvc-tdd/SKILL.md

@@ -25,7 +25,8 @@ Read these first:
 - `docs/<feature-id>/implementation-report.md` when present
 - `docs/<feature-id>/build-test.md` when present
 - `docs/<feature-id>/reference-comparison.md` when present
-- Generated FESA `results.h5` and the exact feature-declared reference `.inp` and Abaqus CSV paths
+- For the final Implementation-owned verification Step/gate, generated FESA `results.h5` and the
+  exact feature-declared reference `.inp` and Abaqus CSV paths
 
 For Harness implementation, also read `.agents/skills/harness/SKILL.md`,
 `.codex/hooks.json`, the materialized phase indexes, and the Executor-selected current
@@ -47,16 +48,21 @@ For Harness implementation, also read `.agents/skills/harness/SKILL.md`,
 5. RED: write the planned unit, integration, parser/I/O, or reference-comparison test first.
 6. RED: run the targeted test and verify the expected failure before production code.
 7. GREEN: implement the minimum C++17/MSVC-compatible code needed for the task.
-8. VERIFY: resolve commands from `.harness/config.json` first, then Harness defaults; run the targeted command, then the full MSVC x64 Debug build/test commands in order.
+8. VERIFY: resolve commands from `.harness/config.json` first, then Harness defaults; run the
+   targeted command and any focused/full MSVC x64 Debug build/test commands declared by the current
+   Step in order.
 9. For C++ production changes, require a related C++ test file in the same patch or already present.
 10. Treat PreToolUse as a test-file-existence guardrail, not proof that RED was observed. Record the RED and GREEN commands and results in the implementation report.
 11. Let Stop perform the final whole-project MSVC build/test before the Step ends.
 12. Record every build/test command, exit code, duration, stdout/stderr tail, failed test names, environment, and project-selection path. Stop after the first decisive failure unless the implementation plan requires another diagnostic command.
 13. For failure triage, classify as `configure | compile | link | test | reference-comparison | harness | environment | upstream-contract`.
-14. Run reference comparison in this literal order: `ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT`.
+14. A non-final Step ends after its declared `RED -> observed failure -> minimal GREEN -> focused/full VERIFY` acceptance commands and owned status/summary update. Do not fail it merely because final solver output, reference artifacts, or `reference-comparison.md` are not yet available.
-15. ARTIFACT CHECK requires exact declared input/CSV paths, generated `results.h5`, the `docs/<feature-id>/io.md` HDF5 projection, source identity/component matching, row uniqueness/finite checks, and approved tolerance.
+15. Only when the approved implementation plan places the current Step after all prerequisite
-16. COMPARE matches HDF5 and CSV rows by declared source identity and component, never by row order. Reject missing, extra, duplicate, and nonfinite required rows before tolerance; preserve warning-only behavior.
+    implementation Steps as the final Implementation-owned verification Step/gate, run reference
-17. Fix implementation-owned failures only and keep changes traceable to the implementation plan.
+    comparison in this literal order: `ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT`.
+16. At that final gate, ARTIFACT CHECK requires exact declared input/CSV paths, generated `results.h5`, the `docs/<feature-id>/io.md` HDF5 projection, source identity/component matching, row uniqueness/finite checks, and approved tolerance.
+17. COMPARE matches HDF5 and CSV rows by declared source identity and component, never by row order. Reject missing, extra, duplicate, and nonfinite required rows before tolerance; preserve warning-only behavior.
+18. Fix implementation-owned failures only and keep changes traceable to the implementation plan.
 
 ## Output Contract
 
@@ -133,4 +139,4 @@ uv run --with pytest python -m pytest -v -rs
 
 ## Handoff
 
-Return the applicable canonical outputs, status, evidence summary, and blockers to Coordinator Agent. Implementation Planning returns `docs/<feature-id>/implementation-plan.md` for one Implementation Agent handoff. Implementation returns `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and `docs/<feature-id>/reference-comparison.md`; send `pass-for-physics-evaluation` to Physics Evaluation Agent through Coordinator Agent. Correction returns `docs/<feature-id>/corrections.md` and a rerun request to Implementation Agent through Coordinator Agent. Return upstream-contract failures to Coordinator Agent for the owning upstream sub-agent.
+Return the applicable canonical outputs, status, evidence summary, and blockers to Coordinator Agent. Implementation Planning returns `docs/<feature-id>/implementation-plan.md` for one Implementation Agent handoff. A non-final Implementation Step returns only its owned status/summary and applicable evidence. The final Implementation-owned verification Step/gate returns `docs/<feature-id>/implementation-report.md`, `docs/<feature-id>/build-test.md`, and `docs/<feature-id>/reference-comparison.md`; send `pass-for-physics-evaluation` to Physics Evaluation Agent through Coordinator Agent. Correction returns `docs/<feature-id>/corrections.md` and a rerun request to Implementation Agent through Coordinator Agent. Return upstream-contract failures to Coordinator Agent for the owning upstream sub-agent.

docs/linear-static-mitc4-shell/numerical-review.md

@@ -9,7 +9,7 @@
 - source_io_definition: `docs/linear-static-mitc4-shell/io.md`
 - source_reference_inventory: `docs/linear-static-mitc4-shell/reference-model.md`
 - repository_policy: `AGENTS.md`, `docs/SOLVER_AGENT_DESIGN.md`,
-  `docs/numerical-reviews/README.md`
+  `.codex/skills/fesa-numerical-review/SKILL.md`
 - reviewed_head: `cf769aa` (`mathematical implementation baseline`)
 - prior_pass_commit: `60b42f4` (`context-only; verdict not inherited`)
 - status: `pass-for-implementation-planning`

phases/linear-static-3d-euler-beam/step0.md

@@ -15,7 +15,7 @@
 - `/docs/ARCHITECTURE.md`
 - `/docs/ADR.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/requirements/README.md`
+- `/.codex/skills/fesa-requirements-baseline/SKILL.md`
 - `/docs/superpowers/specs/2026-08-08-linear-static-3d-euler-beam-design.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`
 - `/reference/cantilever beam/cantilever beam.inp`

phases/linear-static-3d-euler-beam/step1.md

@@ -10,7 +10,7 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/research/README.md`
+- `/.codex/skills/fesa-research-evidence/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/superpowers/specs/2026-08-08-linear-static-3d-euler-beam-design.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

phases/linear-static-3d-euler-beam/step2.md

@@ -10,7 +10,7 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/formulations/README.md`
+- `/.codex/skills/fesa-formulation-spec/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/research.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

phases/linear-static-3d-euler-beam/step25.md

@@ -11,7 +11,7 @@
 - `/AGENTS.md`
 - `/docs/ARCHITECTURE.md`
 - `/docs/ADR.md`
-- `/docs/build-test-reports/README.md`
+- `/.codex/skills/fesa-cpp-msvc-tdd/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/implementation-plan.md`
 - `/docs/linear-static-3d-euler-beam/implementation-report.md`

phases/linear-static-3d-euler-beam/step26.md

@@ -11,7 +11,7 @@
 - `/AGENTS.md`
 - `/docs/ARCHITECTURE.md`
 - `/docs/ADR.md`
-- `/docs/reference-verifications/README.md`
+- `/.codex/skills/fesa-cpp-msvc-tdd/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/build-test.md`
 - `/docs/linear-static-3d-euler-beam/reference-model.md`
 - `/docs/linear-static-3d-euler-beam/io.md`

phases/linear-static-3d-euler-beam/step27.md

@@ -11,7 +11,7 @@
 - `/AGENTS.md`
 - `/docs/ARCHITECTURE.md`
 - `/docs/ADR.md`
-- `/docs/physics-evaluations/README.md`
+- `/.codex/skills/fesa-physics-sanity/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/reference-comparison.md`
 - `/docs/linear-static-3d-euler-beam/reference-model.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`

phases/linear-static-3d-euler-beam/step28.md

@@ -12,7 +12,7 @@
 - `/docs/PRD.md`
 - `/docs/ARCHITECTURE.md`
 - `/docs/ADR.md`
-- `/docs/releases/README.md`
+- `/.codex/skills/fesa-release-readiness/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/research.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

phases/linear-static-3d-euler-beam/step3.md

@@ -10,7 +10,7 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/numerical-reviews/README.md`
+- `/.codex/skills/fesa-numerical-review/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/research.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

phases/linear-static-3d-euler-beam/step4.md

@@ -10,7 +10,7 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/io-definitions/README.md`
+- `/.codex/skills/fesa-io-contract/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`
 - `/docs/linear-static-3d-euler-beam/numerical-review.md`

phases/linear-static-3d-euler-beam/step5.md

@@ -10,7 +10,7 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/reference-models/README.md`
+- `/.codex/skills/fesa-numerical-review/SKILL.md`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/research.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

phases/linear-static-3d-euler-beam/step6.md

@@ -10,9 +10,9 @@
 
 - `/AGENTS.md`
 - `/docs/SOLVER_AGENT_DESIGN.md`
-- `/docs/implementation-plans/README.md`
+- `/.codex/skills/fesa-cpp-msvc-tdd/SKILL.md`
-- `/docs/build-test-reports/README.md`
+- `/.codex/agents/implementation-planning-agent.toml`
-- `/docs/corrections/README.md`
+- `/.codex/agents/correction-agent.toml`
 - `/docs/linear-static-3d-euler-beam/requirements.md`
 - `/docs/linear-static-3d-euler-beam/research.md`
 - `/docs/linear-static-3d-euler-beam/formulation.md`

tests/test_agent_skill_workflow_contract.py

@@ -1,4 +1,6 @@
+import json
 from pathlib import Path
+import re
 import tomllib
 
 
@@ -86,6 +88,55 @@ LIVE_CONTRACT_FILES = (
     ROOT / "docs" / "SOLVER_SKILL_DESIGN.md",
 )
 
+AGENT_STAGE_GUIDANCE_FILES = (
+    ROOT / "AGENTS.md",
+    ROOT / "docs" / "SOLVER_AGENT_DESIGN.md",
+)
+
+EXPECTED_AGENT_STAGE_MAPPING = (
+    ("1. 요구조건", "requirement-agent", "requirements.md"),
+    ("2. 연구", "research-agent", "research.md"),
+    ("3. 정식화", "formulation-agent", "formulation.md"),
+    (
+        "4. 수치 검토 + reference model 계약",
+        "numerical-review-agent",
+        "numerical-review.md, reference-model.md",
+    ),
+    ("5. I/O 정의", "io-definition-agent", "io.md"),
+    (
+        "6. 구현 계획 + C++ 구현 + build/test + reference comparison",
+        "implementation-planning-agent, implementation-agent",
+        "implementation-plan.md, implementation-report.md, build-test.md, reference-comparison.md",
+    ),
+    ("7. 물리 검토", "physics-evaluation-agent", "physics-evaluation.md"),
+    ("8. 배포 준비", "release-agent", "release.md"),
+)
+
+CANONICAL_FEATURE_DIRS = (
+    ROOT / "docs" / "linear-static-3d-euler-beam",
+    ROOT / "docs" / "linear-static-mitc4-shell",
+)
+
+# Plans and specs intentionally retain deleted source paths as migration history.
+HISTORICAL_PATH_EXEMPT_DIRS = (
+    ROOT / "docs" / "superpowers" / "plans",
+    ROOT / "docs" / "superpowers" / "specs",
+)
+
+LEGACY_README_PATTERN = re.compile(
+    r"docs/(?:coordination|requirements|research|formulations|numerical-reviews|"
+    r"io-definitions|reference-models|implementation-plans|build-test-reports|"
+    r"corrections|reference-verifications|physics-evaluations|releases)/README\.md",
+    re.IGNORECASE,
+)
+
+EXPECTED_SKILL_FRONTMATTER_KEYS = ("name", "description")
+EXPECTED_SKILL_INTERFACE_KEYS = (
+    "display_name",
+    "short_description",
+    "default_prompt",
+)
+
 RETIRED_TOKENS = (
     "reference-model-agent",
     "reference model agent",
@@ -122,6 +173,65 @@ def live_contract_text() -> str:
     return "\n".join(read(path) for path in paths)
 
 
+def markdown_stage_mapping(path: Path) -> tuple[tuple[str, str, str], ...]:
+    rows = []
+    for line in read(path).splitlines():
+        columns = [column.strip().replace("`", "") for column in line.strip().split("|")[1:-1]]
+        if len(columns) >= 4 and re.fullmatch(r"[1-8]\. .+", columns[0]):
+            rows.append((columns[0], columns[1], columns[3]))
+    return tuple(rows)
+
+
+def operational_markdown_paths() -> tuple[Path, ...]:
+    paths = [
+        path
+        for feature_dir in CANONICAL_FEATURE_DIRS
+        for path in sorted(feature_dir.glob("*.md"))
+    ]
+    paths.extend(sorted(ROOT.glob("phases/**/step*.md")))
+    return tuple(paths)
+
+
+def parse_skill_frontmatter(path: Path) -> dict[str, str]:
+    lines = read(path).splitlines()
+    assert lines and lines[0] == "---", path
+    assert "---" in lines[1:], path
+    closing_index = lines.index("---", 1)
+    field_lines = lines[1:closing_index]
+    assert len(field_lines) == len(EXPECTED_SKILL_FRONTMATTER_KEYS), path
+
+    parsed = {}
+    for line in field_lines:
+        match = re.fullmatch(r"([a-z_]+): ([^\s].*)", line)
+        assert match is not None, (path, line)
+        key, value = match.groups()
+        assert key not in parsed, (path, key)
+        parsed[key] = value
+
+    assert tuple(parsed) == EXPECTED_SKILL_FRONTMATTER_KEYS, path
+    assert re.fullmatch(r"[a-z0-9]+(?:-[a-z0-9]+)*", parsed["name"]), path
+    assert parsed["description"].startswith("Use when "), path
+    return parsed
+
+
+def parse_skill_interface(path: Path) -> dict[str, str]:
+    lines = [line for line in read(path).splitlines() if line]
+    assert lines and lines[0] == "interface:", path
+    assert len(lines) == len(EXPECTED_SKILL_INTERFACE_KEYS) + 1, path
+
+    parsed = {}
+    for line in lines[1:]:
+        match = re.fullmatch(r'  ([a-z_]+): ("(?:[^"\\]|\\.)*")', line)
+        assert match is not None, (path, line)
+        key, quoted_value = match.groups()
+        assert key not in parsed, (path, key)
+        parsed[key] = json.loads(quoted_value)
+
+    assert tuple(parsed) == EXPECTED_SKILL_INTERFACE_KEYS, path
+    assert all(parsed.values()), path
+    return parsed
+
+
 def test_agent_inventory_is_consolidated():
     actual = {path.stem for path in AGENT_DIR.glob("*.toml")}
     assert actual == EXPECTED_AGENTS
@@ -178,6 +288,20 @@ def test_implementation_absorbs_build_test_and_reference_comparison():
         assert marker in text
 
 
+def test_implementation_steps_keep_final_comparison_in_a_final_gate():
+    paths = (
+        AGENT_DIR / "implementation-agent.toml",
+        SKILL_DIR / "fesa-cpp-msvc-tdd" / "SKILL.md",
+    )
+    for path in paths:
+        text = read(path).lower()
+        assert "final implementation-owned verification step/gate" in text, path
+        assert "non-final step" in text, path
+        assert "artifact check -> compare -> classify -> report" in text, path
+        assert "results.h5" in text, path
+        assert "reference-comparison.md" in text, path
+
+
 def test_agent_hierarchy_is_explicit():
     coordinator = read(AGENT_DIR / "coordinator-agent.toml").lower()
     assert "main agent" in coordinator
@@ -200,12 +324,24 @@ def test_live_contracts_have_no_retired_names_or_paths():
         assert token not in text, token
 
 
-def test_live_guidance_declares_eight_stage_workflow():
+def test_live_guidance_declares_exact_ordered_eight_stage_workflow():
     for path in LIVE_CONTRACT_FILES:
         text = read(path)
         assert "8단계" in text, path
         assert "docs/<feature-id>/" in text, path
 
+    for path in AGENT_STAGE_GUIDANCE_FILES:
+        assert markdown_stage_mapping(path) == EXPECTED_AGENT_STAGE_MAPPING, path
+
+
+def test_operational_documents_do_not_use_deleted_stage_readmes():
+    paths = operational_markdown_paths()
+    assert paths
+    for path in paths:
+        assert not any(path.is_relative_to(directory) for directory in HISTORICAL_PATH_EXEMPT_DIRS)
+        match = LEGACY_README_PATTERN.search(read(path))
+        assert match is None, (path, match.group(0) if match else None)
+
 
 def test_mitc4_live_authority_links_use_feature_bundle():
     text = read(ROOT / "docs" / "MITC4_SUPP.md")
@@ -232,7 +368,7 @@ def test_mitc4_live_authority_links_use_feature_bundle():
         assert legacy_path not in authority_section
 
 
-def test_agent_toml_and_skill_ui_metadata_are_parseable():
+def test_agent_toml_and_limited_skill_yaml_schemas_are_parseable():
     for path in sorted(AGENT_DIR.glob("*.toml")):
         parsed = tomllib.loads(read(path))
         assert parsed["name"] == path.stem
@@ -240,7 +376,7 @@ def test_agent_toml_and_skill_ui_metadata_are_parseable():
 
     for skill_name in EXPECTED_SKILLS:
         skill_dir = SKILL_DIR / skill_name
-        skill_text = read(skill_dir / "SKILL.md")
+        frontmatter = parse_skill_frontmatter(skill_dir / "SKILL.md")
-        ui_text = read(skill_dir / "agents" / "openai.yaml")
+        interface = parse_skill_interface(skill_dir / "agents" / "openai.yaml")
-        assert f"name: {skill_name}" in skill_text
+        assert frontmatter["name"] == skill_name
-        assert f"${skill_name}" in ui_text
+        assert f"${skill_name}" in interface["default_prompt"]