feat: start abaqus input parser

docs/io-definitions/abaqus-input-parser-io.md

@@ -0,0 +1,139 @@
+# Abaqus Input Parser I/O Definition
+
+## Metadata
+
+- feature_id: abaqus-input-parser
+- status: ready-for-implementation-planning
+- owner_agent: io-definition-agent
+- date: 2026-06-12
+
+## Abaqus Input Scope
+
+FESA supports only the Abaqus input keyword subset listed here. This document
+does not claim full Abaqus compatibility.
+
+| keyword | support_status | level | required_parameters | mapped_internal_concept | unsupported-case behavior |
+| --- | --- | --- | --- | --- | --- |
+| `*HEADING` | supported | model | none | model title metadata | accepted; title storage may be deferred |
+| `*NODE` | supported | model | none | node id and global coordinates | malformed rows are errors |
+| `*ELEMENT` | supported | model | `TYPE` | element id, topology, connectivity | missing/unsupported `TYPE` is an error |
+| `*NSET` | supported | model | `NSET` | named node set | missing name is an error |
+| `*ELSET` | supported | model | `ELSET` | named element set | missing name is an error |
+| `*MATERIAL` | supported | model | `NAME` | material identity | missing name is an error |
+| `*ELASTIC` | supported | model | none | linear elastic constants | malformed rows are errors |
+| section keyword | supported | model | `ELSET`, `MATERIAL` | property assignment | unsupported section type is an error |
+| `*STEP` | supported | history | optional `NAME` | analysis step | malformed parameters are errors |
+| `*STATIC` | supported | history | none | static procedure marker | unsupported procedures are errors |
+| `*BOUNDARY` | supported | model/history | none | prescribed nodal dof values | malformed rows are errors |
+| `*CLOAD` | supported | history | none | concentrated nodal load | malformed rows are errors |
+| `*OUTPUT` | supported | history | none | output request root | unsupported options warn or error by context |
+| `*NODE OUTPUT` | supported | history | none | nodal output request | unsupported quantities warn or error by context |
+| `*ELEMENT OUTPUT` | supported | history | none | element output request | unsupported quantities warn or error by context |
+
+Initial V0 element names are two-node line/bar types only: `T2D2`, `T3D2`,
+`C3D2`, and `B31`.
+
+## Syntax Policy
+
+- Keywords and parameter names are case-insensitive.
+- Keyword lines begin with `*`.
+- Comment lines begin with `**` and are ignored.
+- Blank lines are ignored.
+- Fields are comma-separated. Leading and trailing whitespace around fields is
+  ignored.
+- Empty required fields are parse errors.
+- Unsupported keywords are errors unless this contract explicitly marks them as
+  ignored-with-warning.
+- Diagnostics must include severity, a stable code, a human-readable message,
+  and enough line context to locate the input row.
+- Include files are out of scope for this parser phase.
+
+## Model Data Mapping
+
+- Nodes map an Abaqus node label to a FESA node id and three global coordinate
+  components. Missing trailing coordinate components are interpreted as `0.0`
+  only when the keyword-specific test documents that behavior.
+- Elements map an Abaqus element label, supported element type, and connectivity
+  labels to a FESA element. Section assignment supplies material/property
+  linkage in a later parser slice.
+- Node sets and element sets preserve deterministic membership order.
+- Materials map by Abaqus `NAME`. Linear elastic data maps to the semantic
+  material contract used by solver implementation.
+- Section keywords bind an element set to a material and create the semantic
+  property assignment needed by the solver.
+- The global coordinate system is assumed. Units are user-consistent and are not
+  converted by the parser.
+
+## History Data Mapping
+
+- `*STEP` begins an ordered analysis step. If no name is provided, the parser
+  assigns a deterministic step name or id.
+- `*STATIC` marks the step as a linear static procedure for V0.
+- `*BOUNDARY` maps node id, dof range, and value to prescribed boundary
+  conditions.
+- `*CLOAD` maps node id, dof component, and magnitude to concentrated loads.
+- Output request keywords define requested quantities when semantic storage
+  exists; unsupported quantities must not be silently accepted.
+
+## Internal Model Contract
+
+- `Domain` owns model definition data created from the input file.
+- Parsed model objects should be treated as immutable after parsing where
+  practical.
+- `AnalysisStep` owns step-local boundary conditions and loads.
+- The parser must not store equation ids on nodes or elements.
+- Parser diagnostics are part of the result; callers do not need to inspect
+  partial `Domain` state to detect failure.
+
+## Output HDF5 Schema
+
+The parser itself does not write HDF5. Solver output remains authoritative in
+`results.h5` and follows the project HDF5 contract:
+
+| quantity | dataset_path | location | component policy |
+| --- | --- | --- | --- |
+| displacement | `/steps/<step>/frames/<frame>/field_outputs/U` | nodal | `U1`, `U2`, `U3` as applicable |
+| reaction | `/steps/<step>/frames/<frame>/field_outputs/RF` | nodal | `RF1`, `RF2`, `RF3` as applicable |
+| internal force | `/steps/<step>/frames/<frame>/field_outputs/element_forces` | element | feature-specific |
+| stress | `/steps/<step>/frames/<frame>/field_outputs/S` | integration point or element | feature-specific |
+
+Required metadata includes schema version, model id, source input identity,
+coordinate system, units policy, solver version, step/frame identity, and row
+identity fields.
+
+## FESA HDF5 To Reference CSV Comparison Schema
+
+Reference comparison reads `results.h5` and matches deterministic rows against
+Abaqus-generated CSV files under `reference/<model-id>/`. This parser phase does
+not generate or modify those reference artifacts.
+
+Common row identity:
+
+- sort order: step, frame, entity id, location, component
+- node id and element id are Abaqus labels preserved by the parser
+- component names follow the HDF5 component policy
+
+CSV files remain:
+
+- `<model-id>_displacements.csv`
+- `<model-id>_reactions.csv`
+- `<model-id>_internalforces.csv`
+- `<model-id>_stresses.csv`
+
+## Validation Rules
+
+- Duplicate node, element, material, property, set, or step labels are errors.
+- Missing references are errors.
+- Unsupported keywords are errors unless explicitly documented otherwise.
+- Malformed numeric fields are errors.
+- Parser unit tests must cover valid subset mapping and invalid subset
+  diagnostics before production parser changes.
+- Workspace validation remains `python scripts/validate_workspace.py`.
+
+## Downstream Handoff
+
+Implementation planning should split work into mesh keyword parsing,
+diagnostics, set/section mapping, material/history mapping, and integration
+validation. Reference model work may later use this subset to prepare
+`reference/<model-id>/model.inp`, but this phase must not create or modify
+Abaqus reference CSV artifacts.

phases/abaqus-input-parser/index.json

@@ -0,0 +1,65 @@
+{
+  "project": "FESA Structural Solver",
+  "phase": "abaqus-input-parser",
+  "steps": [
+    {
+      "step": 0,
+      "name": "io-contract",
+      "status": "completed",
+      "allowed_paths": [
+        "docs/io-definitions/abaqus-input-parser-io.md"
+      ],
+      "summary": "Abaqus input parser I/O contract added"
+    },
+    {
+      "step": 1,
+      "name": "mesh-keyword-parser",
+      "status": "completed",
+      "allowed_paths": [
+        "src/fesa/io/abaqus/",
+        "tests/unit/abaqus_input_parser_*_test.cpp"
+      ],
+      "summary": "Mesh keyword parser maps NODE and ELEMENT data into Domain"
+    },
+    {
+      "step": 2,
+      "name": "syntax-diagnostics",
+      "status": "pending",
+      "allowed_paths": [
+        "src/fesa/io/abaqus/",
+        "tests/unit/abaqus_input_parser_*_test.cpp"
+      ]
+    },
+    {
+      "step": 3,
+      "name": "sets-and-section-properties",
+      "status": "pending",
+      "allowed_paths": [
+        "src/fesa/io/abaqus/",
+        "src/fesa/model/",
+        "tests/unit/abaqus_input_parser_*_test.cpp",
+        "tests/unit/model_*_test.cpp"
+      ]
+    },
+    {
+      "step": 4,
+      "name": "material-step-load-parser",
+      "status": "pending",
+      "allowed_paths": [
+        "src/fesa/io/abaqus/",
+        "src/fesa/model/",
+        "tests/unit/abaqus_input_parser_*_test.cpp",
+        "tests/unit/model_*_test.cpp"
+      ]
+    },
+    {
+      "step": 5,
+      "name": "integration-validation-report",
+      "status": "pending",
+      "allowed_paths": [
+        "tests/integration/",
+        "docs/build-test-reports/abaqus-input-parser.md"
+      ]
+    }
+  ]
+}

phases/abaqus-input-parser/step0.md

@@ -0,0 +1,65 @@
+# Step 0: io-contract
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/PRD.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/SOLVER_AGENT_DESIGN.md`
+- `/docs/io-definitions/README.md`
+
+## Task
+
+Create the feature-level I/O contract for the Abaqus input parser at
+`/docs/io-definitions/abaqus-input-parser-io.md`.
+
+The contract must explicitly state that FESA supports only the documented
+Abaqus keyword subset, not full Abaqus compatibility. Keep this document at a
+semantic level. Do not design C++ APIs and do not implement parser code in this
+step.
+
+Required scope:
+
+- Model data keywords: `*HEADING`, `*NODE`, `*ELEMENT`, `*NSET`, `*ELSET`,
+  `*MATERIAL`, `*ELASTIC`, and section keywords needed for V0 bar/truss use.
+- History data keywords: `*STEP`, `*STATIC`, `*BOUNDARY`, `*CLOAD`,
+  `*OUTPUT`, `*NODE OUTPUT`, and `*ELEMENT OUTPUT`.
+- Syntax policy for comments beginning with `**`, case-insensitive keywords,
+  comma-separated parameters and data, blank lines, unsupported keywords, and
+  parse diagnostics.
+- Internal semantic mapping to `Domain`, nodes, elements, sets, materials,
+  properties, `AnalysisStep`, boundary conditions, loads, and output requests.
+- HDF5 and reference CSV comparison schema summary consistent with existing
+  PRD/architecture documents. Do not create or modify reference artifacts.
+
+## Tests To Write First
+
+No C++ tests are required in this documentation-only step.
+
+## Acceptance Criteria
+
+```powershell
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+1. Run the acceptance criteria commands.
+2. Confirm the contract does not claim full Abaqus compatibility.
+3. Confirm every supported keyword has purpose, data requirements, mapping, and
+   unsupported-case behavior.
+4. Update `phases/abaqus-input-parser/index.json` step 0:
+   - success: `"status": "completed"`, `"summary": "Abaqus input parser I/O contract added"`
+   - error after three attempts: `"status": "error"`, `"error_message": "<specific error>"`
+   - blocked: `"status": "blocked"`, `"blocked_reason": "<specific reason>"`
+
+## Forbidden
+
+- Do not implement parser code.
+- Do not design C++ APIs.
+- Do not run Abaqus, Nastran, or any reference solver.
+- Do not generate or modify Abaqus reference CSV files.

phases/abaqus-input-parser/step1.md

@@ -0,0 +1,83 @@
+# Step 1: mesh-keyword-parser
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/PRD.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/io-definitions/abaqus-input-parser-io.md`
+- `/src/fesa/model/domain.hpp`
+- `/src/fesa/model/node.hpp`
+- `/src/fesa/model/element.hpp`
+- `/tests/unit/model_domain_test.cpp`
+
+Review step 0 output before implementing. Keep this step limited to parser API
+and mesh keyword mapping.
+
+## Task
+
+Add the first C++ parser slice under `/src/fesa/io/abaqus/`.
+
+Required behavior:
+
+- Provide a small `InputParser` that accepts an in-memory `.inp` string and
+  returns a parse result containing `fesa::model::Domain` and
+  `fesa::core::Status`.
+- Parse `*HEADING` as accepted but not yet stored.
+- Parse `*NODE` data lines into `Domain::add_node`.
+- Parse `*ELEMENT, TYPE=<type>` data lines into `Domain::add_element`.
+- Support only two-node line/bar element names needed by the current model:
+  `T2D2`, `T3D2`, `B31`, and `C3D2`.
+- Map `T2D2`, `T3D2`, and `C3D2` to `ElementTopology::truss2`; map `B31` to
+  `ElementTopology::bar2`.
+- Use `PropertyId{0}` for elements in this first mesh-only slice because
+  section parsing is introduced later.
+- Treat keywords and parameter names case-insensitively.
+- Skip blank lines and comment lines that begin with `**`.
+
+Keep implementation C++17/MSVC-compatible. Do not introduce external
+libraries, regex-heavy parser frameworks, JavaScript, TypeScript, or npm
+fallbacks.
+
+## Tests To Write First
+
+Add `/tests/unit/abaqus_input_parser_mesh_test.cpp` before production code.
+
+The test must first fail because `fesa/io/abaqus/input_parser.hpp` does not
+exist, then pass after implementation. It should verify:
+
+- a small input with `*HEADING`, `*NODE`, and `*ELEMENT, TYPE=T3D2` returns
+  `Status::is_ok() == true`;
+- the returned `Domain` contains the expected node ids and 3D coordinates;
+- the returned `Domain` contains the expected element id, topology,
+  connectivity, and `PropertyId{0}`;
+- keyword and parameter casing are accepted case-insensitively.
+
+## Acceptance Criteria
+
+```powershell
+ctest --test-dir build/msvc-debug --output-on-failure -C Debug -R abaqus_input_parser_mesh_test
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+1. Run the targeted CTest after writing the test and before production code;
+   confirm the failure is due to the missing parser API.
+2. Implement the minimum code needed for the test to pass.
+3. Run all acceptance criteria commands.
+4. Confirm C++ production changes have a related C++ test file.
+5. Update `phases/abaqus-input-parser/index.json` step 1:
+   - success: `"status": "completed"`, `"summary": "Mesh keyword parser maps NODE and ELEMENT data into Domain"`
+   - error after three attempts: `"status": "error"`, `"error_message": "<specific error>"`
+   - blocked: `"status": "blocked"`, `"blocked_reason": "<specific reason>"`
+
+## Forbidden
+
+- Do not add set, material, section, load, boundary condition, output request,
+  include-file, or HDF5 behavior in this step.
+- Do not mutate reference artifacts.

phases/abaqus-input-parser/step2.md

@@ -0,0 +1,63 @@
+# Step 2: syntax-diagnostics
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/io-definitions/abaqus-input-parser-io.md`
+- `/src/fesa/io/abaqus/input_parser.hpp`
+- `/src/fesa/io/abaqus/input_parser.cpp`
+- `/tests/unit/abaqus_input_parser_mesh_test.cpp`
+
+Review completed step summaries in `/phases/abaqus-input-parser/index.json`.
+
+## Task
+
+Add structured diagnostics for parser syntax and unsupported subset behavior.
+
+Required behavior:
+
+- Unsupported keywords produce `Status::is_ok() == false` with an error
+  diagnostic code and message that identifies the keyword.
+- Malformed `*NODE` and `*ELEMENT` data lines produce error diagnostics.
+- Missing required `TYPE` on `*ELEMENT` produces an error diagnostic.
+- Unsupported element types produce an error diagnostic and do not add that
+  element.
+- Diagnostics must include enough context in the message to locate the line
+  number.
+- Existing valid mesh parser behavior remains unchanged.
+
+## Tests To Write First
+
+Extend `/tests/unit/abaqus_input_parser_mesh_test.cpp` or add
+`/tests/unit/abaqus_input_parser_diagnostics_test.cpp` before production code.
+
+Test:
+
+- unsupported keyword failure;
+- malformed node row failure;
+- missing element `TYPE` failure;
+- unsupported element type failure.
+
+Run the targeted CTest and confirm the new tests fail for missing behavior
+before implementation.
+
+## Acceptance Criteria
+
+```powershell
+ctest --test-dir build/msvc-debug --output-on-failure -C Debug -R abaqus_input_parser
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+Update step 2 status with summary or a concrete error/blocked reason.
+
+## Forbidden
+
+- Do not add new semantic model fields except what diagnostics require.
+- Do not add material, section, step, boundary, or load parsing.

phases/abaqus-input-parser/step3.md

@@ -0,0 +1,62 @@
+# Step 3: sets-and-section-properties
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/io-definitions/abaqus-input-parser-io.md`
+- `/src/fesa/model/domain.hpp`
+- `/src/fesa/model/element.hpp`
+- `/src/fesa/model/property.hpp`
+- `/src/fesa/io/abaqus/input_parser.hpp`
+- `/src/fesa/io/abaqus/input_parser.cpp`
+
+Review completed parser tests and phase summaries first.
+
+## Task
+
+Extend the model and parser only as needed to represent set membership and
+section-to-property assignment for V0 bar/truss models.
+
+Required behavior:
+
+- Parse `*NSET, NSET=<name>` node membership rows.
+- Parse `*ELSET, ELSET=<name>` element membership rows.
+- Parse one V0 section keyword that assigns a material name to an element set.
+  Prefer the smallest section subset compatible with the current V0 element
+  path.
+- Preserve deterministic member ordering as read, unless the I/O contract
+  explicitly states otherwise.
+- Keep `Domain` as the owner of model definition data. Do not store equation ids
+  on nodes or elements.
+
+## Tests To Write First
+
+Add focused C++ tests before production code:
+
+- a model test for any new set/section semantic model API;
+- a parser test proving `*NSET`, `*ELSET`, and the selected section keyword map
+  into the semantic model.
+
+Run targeted CTest and confirm the tests fail before implementation.
+
+## Acceptance Criteria
+
+```powershell
+ctest --test-dir build/msvc-debug --output-on-failure -C Debug -R "(model_|abaqus_input_parser_)"
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+Update step 3 status with summary or a concrete error/blocked reason.
+
+## Forbidden
+
+- Do not parse materials beyond names needed for section linkage.
+- Do not add loads, boundary conditions, or analysis steps.
+- Do not generate or modify reference artifacts.

phases/abaqus-input-parser/step4.md

@@ -0,0 +1,65 @@
+# Step 4: material-step-load-parser
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/PRD.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/io-definitions/abaqus-input-parser-io.md`
+- `/src/fesa/model/material.hpp`
+- `/src/fesa/model/analysis_step.hpp`
+- `/src/fesa/model/boundary_condition.hpp`
+- `/src/fesa/model/load.hpp`
+- `/src/fesa/io/abaqus/input_parser.hpp`
+- `/src/fesa/io/abaqus/input_parser.cpp`
+
+Review completed parser and model tests first.
+
+## Task
+
+Extend the parser for the V0 material and history data subset.
+
+Required behavior:
+
+- Parse `*MATERIAL, NAME=<name>` and `*ELASTIC` data into the internal material
+  representation. If the current `Material` model cannot store elastic data,
+  add the smallest semantic extension with tests.
+- Parse `*STEP` and `*STATIC` into ordered `AnalysisStep` definitions.
+- Parse `*BOUNDARY` rows into step boundary conditions using existing
+  `DofComponent` mapping.
+- Parse `*CLOAD` rows into step concentrated loads using existing
+  `DofComponent` mapping.
+- Parse `*OUTPUT`, `*NODE OUTPUT`, and `*ELEMENT OUTPUT` only to the extent
+  documented in the I/O contract. If semantic storage is not yet present, record
+  an explicit ignored-with-warning diagnostic rather than inventing output model
+  APIs.
+
+## Tests To Write First
+
+Add focused C++ tests before production code:
+
+- model tests for any new material or output request semantic fields;
+- parser tests for material/elastic, step/static, boundary, and cload rows.
+
+Run targeted CTest and confirm the tests fail before implementation.
+
+## Acceptance Criteria
+
+```powershell
+ctest --test-dir build/msvc-debug --output-on-failure -C Debug -R "(model_|abaqus_input_parser_)"
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+Update step 4 status with summary or a concrete error/blocked reason.
+
+## Forbidden
+
+- Do not implement analysis execution, assembly, HDF5 writing, or reference
+  comparison in this step.
+- Do not mutate reference artifacts.

phases/abaqus-input-parser/step5.md

@@ -0,0 +1,55 @@
+# Step 5: integration-validation-report
+
+## Read First
+
+Read these files before editing:
+
+- `/AGENTS.md`
+- `/docs/PRD.md`
+- `/docs/ARCHITECTURE.md`
+- `/docs/ADR.md`
+- `/docs/io-definitions/abaqus-input-parser-io.md`
+- `/src/fesa/io/abaqus/input_parser.hpp`
+- `/tests/unit/abaqus_input_parser_mesh_test.cpp`
+- existing parser/model tests added by prior steps
+
+Review all completed step summaries in `/phases/abaqus-input-parser/index.json`.
+
+## Task
+
+Add an integration-level parser test and a build/test report.
+
+Required behavior:
+
+- Add a small integration test that parses a V0 Abaqus `.inp` string containing
+  the supported parser subset and validates the resulting `Domain` and
+  `AnalysisStep` data.
+- Keep the test in memory; do not create or modify Abaqus reference CSV
+  artifacts.
+- Write `/docs/build-test-reports/abaqus-input-parser.md` with command evidence,
+  exit codes, and known limitations.
+
+## Tests To Write First
+
+Add `/tests/integration/abaqus_input_parser_integration_test.cpp` before any
+final integration adjustments. Confirm it fails for the missing integrated
+behavior, then make it pass with the minimum implementation-owned changes.
+
+## Acceptance Criteria
+
+```powershell
+ctest --test-dir build/msvc-debug --output-on-failure -C Debug -R abaqus_input_parser
+python -m unittest discover -s scripts -p "test_*.py"
+python scripts/validate_workspace.py
+```
+
+## Verification Procedure
+
+1. Run the acceptance criteria commands.
+2. Confirm no reference artifacts were generated or modified.
+3. Update step 5 status with summary or a concrete error/blocked reason.
+
+## Forbidden
+
+- Do not claim reference comparison, physics sanity, or release readiness.
+- Do not generate, restore, or modify Abaqus reference CSV files.

phases/index.json

@@ -3,6 +3,10 @@
     {
       "dir": "solver-core-skeleton",
       "status": "completed"
+    },
+    {
+      "dir": "abaqus-input-parser",
+      "status": "pending"
     }
   ]
 }

scripts/test_validate_workspace.py

@@ -30,14 +30,15 @@ class ValidateWorkspaceTests(unittest.TestCase):
             (root / "CMakeLists.txt").write_text("cmake_minimum_required(VERSION 3.20)\n", encoding="utf-8")
             build_dir = root / "build" / "msvc-debug"
             with patch.dict(os.environ, {}, clear=True):
-                self.assertEqual(
+                with patch.object(validate_workspace.shutil, "which", return_value="C:\\tools\\cmake.exe"):
-                    validate_workspace.discover_commands(root),
+                    self.assertEqual(
-                    [
+                        validate_workspace.discover_commands(root),
-                        f'cmake -S "{root}" -B "{build_dir}" -G "Visual Studio 17 2022" -A x64',
+                        [
-                        f'cmake --build "{build_dir}" --config Debug',
+                            f'cmake -S "{root}" -B "{build_dir}" -G "Visual Studio 17 2022" -A x64',
-                        f'ctest --test-dir "{build_dir}" --output-on-failure -C Debug',
+                            f'cmake --build "{build_dir}" --config Debug',
-                    ],
+                            f'ctest --test-dir "{build_dir}" --output-on-failure -C Debug',
-                )
+                        ],
+                    )
 
     def test_msvc_debug_configure_preset_is_preferred_when_present(self):
         validate_workspace = load_validate_workspace()
@@ -60,14 +61,39 @@ class ValidateWorkspaceTests(unittest.TestCase):
                 encoding="utf-8",
             )
             with patch.dict(os.environ, {}, clear=True):
-                self.assertEqual(
+                with patch.object(validate_workspace.shutil, "which", return_value="C:\\tools\\cmake.exe"):
-                    validate_workspace.discover_commands(root),
+                    self.assertEqual(
-                    [
+                        validate_workspace.discover_commands(root),
-                        "cmake --preset msvc-debug",
+                        [
-                        f'cmake --build "{root / "out" / "msvc-debug"}" --config Debug',
+                            "cmake --preset msvc-debug",
-                        f'ctest --test-dir "{root / "out" / "msvc-debug"}" --output-on-failure -C Debug',
+                            f'cmake --build "{root / "out" / "msvc-debug"}" --config Debug',
-                    ],
+                            f'ctest --test-dir "{root / "out" / "msvc-debug"}" --output-on-failure -C Debug',
-                )
+                        ],
+                    )
+
+    def test_cmake_commands_use_common_install_path_when_tools_are_not_on_path(self):
+        validate_workspace = load_validate_workspace()
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp) / "project"
+            root.mkdir()
+            (root / "CMakeLists.txt").write_text("cmake_minimum_required(VERSION 3.20)\n", encoding="utf-8")
+            common_bin = Path(tmp) / "CMake" / "bin"
+            common_bin.mkdir(parents=True)
+            (common_bin / "cmake.exe").write_text("", encoding="utf-8")
+            (common_bin / "ctest.exe").write_text("", encoding="utf-8")
+            build_dir = root / "build" / "msvc-debug"
+
+            with patch.dict(os.environ, {}, clear=True):
+                with patch.object(validate_workspace, "COMMON_CMAKE_BIN", common_bin):
+                    with patch.object(validate_workspace.shutil, "which", return_value=None):
+                        self.assertEqual(
+                            validate_workspace.discover_commands(root),
+                            [
+                                f'"{common_bin / "cmake.exe"}" -S "{root}" -B "{build_dir}" -G "Visual Studio 17 2022" -A x64',
+                                f'"{common_bin / "cmake.exe"}" --build "{build_dir}" --config Debug',
+                                f'"{common_bin / "ctest.exe"}" --test-dir "{build_dir}" --output-on-failure -C Debug',
+                            ],
+                        )
 
     def test_no_cmake_project_has_no_validation_commands(self):
         validate_workspace = load_validate_workspace()

scripts/validate_workspace.py

@@ -32,6 +32,17 @@ def _cmake_config() -> tuple[str, str, str, Path]:
     return generator, platform, config, build_dir
 
 
+def _tool_command(tool_name: str) -> str:
+    if shutil.which(tool_name) is not None:
+        return tool_name
+
+    exe = COMMON_CMAKE_BIN / f"{tool_name}.exe"
+    if exe.exists():
+        return f'"{exe}"'
+
+    return tool_name
+
+
 def _read_presets(root: Path) -> dict:
     presets_file = root / "CMakePresets.json"
     if not presets_file.exists():
@@ -53,13 +64,15 @@ def _preset_binary_dir(root: Path, preset: dict) -> Path:
 def load_preset_commands(root: Path) -> list[str]:
     payload = _read_presets(root)
     config = os.environ.get("HARNESS_CMAKE_CONFIG", DEFAULT_CONFIG)
+    cmake = _tool_command("cmake")
+    ctest = _tool_command("ctest")
     for preset in payload.get("configurePresets", []):
         if isinstance(preset, dict) and preset.get("name") == PRESET_NAME:
             build_dir = _preset_binary_dir(root, preset)
             return [
-                f"cmake --preset {PRESET_NAME}",
+                f"{cmake} --preset {PRESET_NAME}",
-                f'cmake --build "{build_dir}" --config {config}',
+                f'{cmake} --build "{build_dir}" --config {config}',
-                f'ctest --test-dir "{build_dir}" --output-on-failure -C {config}',
+                f'{ctest} --test-dir "{build_dir}" --output-on-failure -C {config}',
             ]
     return []
 
@@ -71,10 +84,12 @@ def load_cmake_commands(root: Path) -> list[str]:
     generator, platform, config, build_dir = _cmake_config()
     if not build_dir.is_absolute():
         build_dir = root / build_dir
+    cmake = _tool_command("cmake")
+    ctest = _tool_command("ctest")
     return [
-        f'cmake -S "{root}" -B "{build_dir}" -G "{generator}" -A {platform}',
+        f'{cmake} -S "{root}" -B "{build_dir}" -G "{generator}" -A {platform}',
-        f'cmake --build "{build_dir}" --config {config}',
+        f'{cmake} --build "{build_dir}" --config {config}',
-        f'ctest --test-dir "{build_dir}" --output-on-failure -C {config}',
+        f'{ctest} --test-dir "{build_dir}" --output-on-failure -C {config}',
     ]
 
 

src/fesa/io/abaqus/input_parser.cpp

@@ -0,0 +1,214 @@
+#include <fesa/io/abaqus/input_parser.hpp>
+
+#include <algorithm>
+#include <array>
+#include <cctype>
+#include <stdexcept>
+#include <string>
+#include <vector>
+
+namespace fesa::io::abaqus {
+namespace {
+
+enum class Section {
+    none,
+    heading,
+    node,
+    element
+};
+
+struct ElementSection {
+    model::ElementTopology topology = model::ElementTopology::unknown;
+};
+
+std::string trim(std::string_view text)
+{
+    auto first = text.begin();
+    auto last = text.end();
+    while (first != last && std::isspace(static_cast<unsigned char>(*first)) != 0) {
+        ++first;
+    }
+    while (first != last && std::isspace(static_cast<unsigned char>(*(last - 1))) != 0) {
+        --last;
+    }
+    return std::string(first, last);
+}
+
+std::string lower(std::string text)
+{
+    std::transform(text.begin(), text.end(), text.begin(), [](unsigned char ch) {
+        return static_cast<char>(std::tolower(ch));
+    });
+    return text;
+}
+
+std::vector<std::string> split_commas(std::string_view line)
+{
+    std::vector<std::string> fields;
+    std::size_t start = 0;
+    while (start <= line.size()) {
+        const auto comma = line.find(',', start);
+        const auto end = comma == std::string_view::npos ? line.size() : comma;
+        fields.push_back(trim(line.substr(start, end - start)));
+        if (comma == std::string_view::npos) {
+            break;
+        }
+        start = comma + 1;
+    }
+    return fields;
+}
+
+bool parse_int(const std::string& text, int& value)
+{
+    try {
+        std::size_t parsed = 0;
+        value = std::stoi(text, &parsed);
+        return parsed == text.size();
+    } catch (const std::invalid_argument&) {
+        return false;
+    } catch (const std::out_of_range&) {
+        return false;
+    }
+}
+
+bool parse_double(const std::string& text, double& value)
+{
+    try {
+        std::size_t parsed = 0;
+        value = std::stod(text, &parsed);
+        return parsed == text.size();
+    } catch (const std::invalid_argument&) {
+        return false;
+    } catch (const std::out_of_range&) {
+        return false;
+    }
+}
+
+model::ElementTopology topology_for_type(const std::string& raw_type)
+{
+    const auto type = lower(raw_type);
+    if (type == "t2d2" || type == "t3d2" || type == "c3d2") {
+        return model::ElementTopology::truss2;
+    }
+    if (type == "b31") {
+        return model::ElementTopology::bar2;
+    }
+    return model::ElementTopology::unknown;
+}
+
+std::string parameter_value(const std::vector<std::string>& fields, const std::string& key)
+{
+    const auto expected_key = lower(key);
+    for (std::size_t i = 1; i < fields.size(); ++i) {
+        const auto equals = fields[i].find('=');
+        if (equals == std::string::npos) {
+            continue;
+        }
+        const auto field_key = lower(trim(std::string_view{fields[i]}.substr(0, equals)));
+        if (field_key == expected_key) {
+            return trim(std::string_view{fields[i]}.substr(equals + 1));
+        }
+    }
+    return {};
+}
+
+void parse_node_line(model::Domain& domain, const std::vector<std::string>& fields)
+{
+    if (fields.size() != 4) {
+        return;
+    }
+
+    int id = 0;
+    std::array<double, 3> coordinates{};
+    if (!parse_int(fields[0], id) ||
+        !parse_double(fields[1], coordinates[0]) ||
+        !parse_double(fields[2], coordinates[1]) ||
+        !parse_double(fields[3], coordinates[2])) {
+        return;
+    }
+
+    domain.add_node(model::Node{core::NodeId{id}, coordinates});
+}
+
+void parse_element_line(model::Domain& domain,
+                        const ElementSection& element_section,
+                        const std::vector<std::string>& fields)
+{
+    if (element_section.topology == model::ElementTopology::unknown) {
+        return;
+    }
+    if (fields.size() != 3) {
+        return;
+    }
+
+    int id = 0;
+    int first_node = 0;
+    int second_node = 0;
+    if (!parse_int(fields[0], id) || !parse_int(fields[1], first_node) || !parse_int(fields[2], second_node)) {
+        return;
+    }
+
+    domain.add_element(model::Element{
+        core::ElementId{id},
+        element_section.topology,
+        {core::NodeId{first_node}, core::NodeId{second_node}},
+        core::PropertyId{0}
+    });
+}
+
+} // namespace
+
+ParseResult InputParser::parse(std::string_view input) const
+{
+    ParseResult result{model::Domain{}, core::Status::ok()};
+    Section section = Section::none;
+    ElementSection element_section{};
+    std::size_t start = 0;
+
+    while (start <= input.size()) {
+        const auto newline = input.find('\n', start);
+        const auto end = newline == std::string_view::npos ? input.size() : newline;
+        auto line = input.substr(start, end - start);
+        if (!line.empty() && line.back() == '\r') {
+            line.remove_suffix(1);
+        }
+
+        const auto cleaned = trim(line);
+        if (cleaned.empty() || cleaned.rfind("**", 0) == 0) {
+            if (newline == std::string_view::npos) {
+                break;
+            }
+            start = newline + 1;
+            continue;
+        }
+
+        if (cleaned.front() == '*') {
+            const auto keyword_fields = split_commas(std::string_view{cleaned}.substr(1));
+            const auto keyword = keyword_fields.empty() ? std::string{} : lower(keyword_fields[0]);
+            if (keyword == "heading") {
+                section = Section::heading;
+            } else if (keyword == "node") {
+                section = Section::node;
+            } else if (keyword == "element") {
+                section = Section::element;
+                const auto type = parameter_value(keyword_fields, "type");
+                element_section.topology = topology_for_type(type);
+            } else {
+                section = Section::none;
+            }
+        } else if (section == Section::node) {
+            parse_node_line(result.domain, split_commas(cleaned));
+        } else if (section == Section::element) {
+            parse_element_line(result.domain, element_section, split_commas(cleaned));
+        }
+
+        if (newline == std::string_view::npos) {
+            break;
+        }
+        start = newline + 1;
+    }
+
+    return result;
+}
+
+} // namespace fesa::io::abaqus

src/fesa/io/abaqus/input_parser.hpp

@@ -0,0 +1,20 @@
+#pragma once
+
+#include <fesa/core/status.hpp>
+#include <fesa/model/domain.hpp>
+
+#include <string_view>
+
+namespace fesa::io::abaqus {
+
+struct ParseResult {
+    model::Domain domain;
+    core::Status status;
+};
+
+class InputParser {
+public:
+    ParseResult parse(std::string_view input) const;
+};
+
+} // namespace fesa::io::abaqus

tests/unit/abaqus_input_parser_mesh_test.cpp

@@ -0,0 +1,80 @@
+#include <fesa/io/abaqus/input_parser.hpp>
+
+#include <string>
+
+namespace {
+
+int fail()
+{
+    return 1;
+}
+
+} // namespace
+
+int main()
+{
+    fesa::io::abaqus::InputParser parser;
+
+    const std::string input = R"inp(
+** mesh parser smoke case
+*HeAdInG
+small truss model
+*NoDe
+1, 0.0, 0.0, 0.0
+2, 1.5, 0.0, 0.0
+*ElEmEnT, TyPe=t3d2
+10, 1, 2
+)inp";
+
+    const auto result = parser.parse(input);
+    if (!result.status.is_ok()) {
+        return fail();
+    }
+
+    const auto& domain = result.domain;
+    if (domain.nodes().size() != 2 || domain.elements().size() != 1) {
+        return fail();
+    }
+
+    const auto* first_node = domain.find_node(fesa::core::NodeId{1});
+    if (first_node == nullptr || first_node->coordinates()[0] != 0.0 ||
+        first_node->coordinates()[1] != 0.0 || first_node->coordinates()[2] != 0.0) {
+        return fail();
+    }
+
+    const auto* second_node = domain.find_node(fesa::core::NodeId{2});
+    if (second_node == nullptr || second_node->coordinates()[0] != 1.5 ||
+        second_node->coordinates()[1] != 0.0 || second_node->coordinates()[2] != 0.0) {
+        return fail();
+    }
+
+    const auto* element = domain.find_element(fesa::core::ElementId{10});
+    if (element == nullptr ||
+        element->topology() != fesa::model::ElementTopology::truss2 ||
+        element->node_ids().size() != 2 ||
+        element->node_ids()[0].value != 1 ||
+        element->node_ids()[1].value != 2 ||
+        element->property_id().value != 0) {
+        return fail();
+    }
+
+    const std::string beam_input = R"inp(
+*NODE
+1, 0.0, 0.0, 0.0
+2, 0.0, 2.0, 0.0
+*ELEMENT, TYPE=B31
+20, 1, 2
+)inp";
+
+    const auto beam_result = parser.parse(beam_input);
+    const auto* beam = beam_result.domain.find_element(fesa::core::ElementId{20});
+    if (!beam_result.status.is_ok() ||
+        beam == nullptr ||
+        beam->topology() != fesa::model::ElementTopology::bar2 ||
+        beam->node_ids().size() != 2 ||
+        beam->property_id().value != 0) {
+        return fail();
+    }
+
+    return 0;
+}