baram2584/FESADev
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat(nonlinear-static-newton-raphson): step 1 - nonlinear-static-domain-contract

Browse Source
This commit is contained in:
KOKO\Mimi
2026-08-24 13:17:17 +09:00
parent e7c6932d88
commit c00fb79b8f
28 changed files with 814 additions and 275 deletions
Download Patch File Download Diff File Expand all files Collapse all files
phases/nonlinear-static-newton-raphson/step0.md
+8 -12
View File
@@ -95,8 +95,8 @@ struct AnalysisRequest {
실행:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "FesaApplication|OutputPath" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "FesaApplication|OutputPath" --output-on-failure
```
기대: 새 테스트가 컴파일 실패 또는 assertion 실패로 실패한다. 새 테스트가 예상 없이 통과하면 구현을 중단하고 Coordinator에게 보고한다.
@@ -110,18 +110,14 @@ ctest --test-dir .harness/build -C Debug -R "FesaApplication|OutputPath" --outpu
## VERIFY
실행 전 `Test-Path .harness\config.json`으로 Harness config를 재확인한다. 있으면 그 설정을 우선한다. 없으면 다음 순서로 실행한다.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment. Run:
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "FesaApplication|OutputPath" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "FesaApplication|OutputPath" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
## 상태 기록
phases/nonlinear-static-newton-raphson/step1.md
+8 -12
View File
@@ -95,8 +95,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "Domain|DomainMapping|Abaqus" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "Domain|DomainMapping|Abaqus" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops the Step.
@@ -111,18 +111,14 @@ Expected: new tests fail. Unexpected pass stops the Step.
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "Domain|DomainMapping|Abaqus" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "Domain|DomainMapping|Abaqus" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before using these defaults.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step10.md
+8 -12
View File
@@ -137,8 +137,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "LinearStaticAnalysis|NonlinearStaticProcedure|FesaApplication" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "LinearStaticAnalysis|NonlinearStaticProcedure|FesaApplication" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -150,18 +150,14 @@ Refactor current parse/map and linear compute/recovery out of `LinearStaticAnaly
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "LinearStaticAnalysis|NonlinearStaticProcedure|FesaApplication" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "LinearStaticAnalysis|NonlinearStaticProcedure|FesaApplication" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step11.md
+8 -12
View File
@@ -139,8 +139,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearStaticReference|ReferenceTolerance|Mitc4Reference" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearStaticReference|ReferenceTolerance|Mitc4Reference" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -165,18 +165,14 @@ Use docs/TOLERANCE.md exactly: family scale `S=max(abs(reference))`, near-zero b
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearStaticReference|ReferenceTolerance|Mitc4Reference" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearStaticReference|ReferenceTolerance|Mitc4Reference" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step12.md
+6 -10
View File
@@ -66,18 +66,14 @@ Expected: evidence freshness audit fails before this Step writes docs. If it une
## VERIFY
Recheck `.harness/config.json`. If absent, use:
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment. Run:
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
ctest --test-dir .harness/build -C Debug -R "NonlinearStaticReference" --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
ctest --preset windows-msvc-ninja-debug -R "NonlinearStaticReference" --output-on-failure
git diff --check
git status --short
```
phases/nonlinear-static-newton-raphson/step2.md
+8 -12
View File
@@ -64,8 +64,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "FiniteRotation" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "FiniteRotation" --output-on-failure
```
Expected: tests fail because the rotation module does not exist. Unexpected pass stops.
@@ -77,18 +77,14 @@ Implement the SO(3) helper functions with finite checks and principal-branch val
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "FiniteRotation" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "FiniteRotation" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before using default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step3.md
+8 -12
View File
@@ -87,8 +87,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearMitc4Shell|NonlinearMitc4Recovery" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearMitc4Shell|NonlinearMitc4Recovery" --output-on-failure
```
Expected: compile or test failure because nonlinear MITC4 files do not exist. Unexpected pass stops.
@@ -100,18 +100,14 @@ Implement nonlinear MITC4 creation, kinematics, and recovery using approved 2x2x
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearMitc4Shell|NonlinearMitc4Recovery" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearMitc4Shell|NonlinearMitc4Recovery" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step4.md
+8 -12
View File
@@ -61,8 +61,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearMitc4Residual|NonlinearMitc4Tangent|NonlinearMitc4Objectivity|NonlinearMitc4Patch" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearMitc4Residual|NonlinearMitc4Tangent|NonlinearMitc4Objectivity|NonlinearMitc4Patch" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -74,18 +74,14 @@ Implement same-trial internal residual/tangent, exact rotation derivative terms
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearMitc4Residual|NonlinearMitc4Tangent|NonlinearMitc4Objectivity|NonlinearMitc4Patch" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearMitc4Residual|NonlinearMitc4Tangent|NonlinearMitc4Objectivity|NonlinearMitc4Patch" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step5.md
+8 -12
View File
@@ -139,8 +139,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearStaticControl|NonlinearConvergence|NonlinearLoadBoundary" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearStaticControl|NonlinearConvergence|NonlinearLoadBoundary" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -152,18 +152,14 @@ Implement factor sequence derivation, load/BC scaling, global-once fixed-load ex
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearStaticControl|NonlinearConvergence|NonlinearLoadBoundary" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearStaticControl|NonlinearConvergence|NonlinearLoadBoundary" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step6.md
+8 -12
View File
@@ -68,8 +68,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "TangentSolver|MklPardiso" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "TangentSolver|MklPardiso" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -81,18 +81,14 @@ Implement backend-neutral tangent solver boundary and MKL full-CSR adapter. Fact
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "TangentSolver|MklPardiso" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "TangentSolver|MklPardiso" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step7.md
+8 -12
View File
@@ -94,8 +94,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NewtonIterationLog" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NewtonIterationLog" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -107,18 +107,14 @@ Implement a small log writer with explicit open/write/flush/close state, seriali
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NewtonIterationLog" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NewtonIterationLog" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step8.md
+8 -12
View File
@@ -130,8 +130,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearAnalysisState|CommitRollback" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearAnalysisState|CommitRollback" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -143,18 +143,14 @@ Implement `NonlinearAnalysisState::Create` as the only construction seam for a v
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearAnalysisState|CommitRollback" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearAnalysisState|CommitRollback" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록
phases/nonlinear-static-newton-raphson/step9.md
+8 -12
View File
@@ -80,8 +80,8 @@ Add tests first.
Run:
```powershell
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearHdf5|Hdf5ResultsWriter" --output-on-failure
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearHdf5|Hdf5ResultsWriter" --output-on-failure
```
Expected: new tests fail. Unexpected pass stops.
@@ -93,18 +93,14 @@ Implement `include/fesa/results/nonlinear_results_writer.h` as the backend-neutr
## VERIFY
```powershell
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
"-DFESA_GTEST_SOURCE_DIR=$gtestSource" `
"-DMKL_DIR=$mklDir" `
"-DTBB_DIR=$tbbDir" `
"-DHDF5_DIR=$hdf5Dir"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug -R "NonlinearHdf5|Hdf5ResultsWriter" --output-on-failure
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure
cmake --preset windows-msvc-ninja-debug
cmake --build --preset windows-msvc-ninja-debug
ctest --preset windows-msvc-ninja-debug -R "NonlinearHdf5|Hdf5ResultsWriter" --output-on-failure
ctest --preset windows-msvc-ninja-debug --show-only=json-v1
ctest --preset windows-msvc-ninja-debug --output-on-failure
```
Recheck `.harness/config.json` before default commands.
Use the ignored `.harness/config.json` preset contract. The Harness process must inherit VsDevCmd x64 and `FESA_GTEST_SOURCE_DIR`, `MKL_DIR`, `TBB_DIR`, and `HDF5_DIR` from its parent launch environment.
## 상태 기록