# FESA Linear Static MITC4 Shell Formulation ## Metadata - feature_id: `linear-static-mitc4-shell` - source_requirement: `docs/requirements/linear-static-mitc4-shell.md` - source_research: `docs/research/linear-static-mitc4-shell-research.md` - source_numerical_review: `docs/numerical-reviews/linear-static-mitc4-shell-review.md` - status: `ready-for-numerical-review` - owner_agent: `formulation-agent` - date: `2026-08-11` - revision_basis: numerical review commit `0a5aad4`; findings `NR-C01` through `NR-C05` and decisions `NR-D01` through `NR-D02` - revision_state: `ready-for-numerical-rereview-not-implementation-planning` - product_execution_scope: `small-strain, small-rotation linear static only` - future_formulation_scope: `geometrically nonlinear Total Lagrangian residual/tangent; not executable` ## 1. Purpose, authority, and decision boundary This document is the mathematical and algorithmic contract for the FESA four-node MITC4 shell element. It strengthens the earlier draft with the approved requirements and research evidence. It does not define C++ APIs, parser classes, HDF5 paths, or a reference-solver workflow. The normative product path is: - one linear-static step; - small strain and small rotation; - four-node bilinear degenerated-continuum shell geometry; - 20 physical element coordinates, embedded in 24 global shell DOFs; - MITC4 edge-midpoint assumed transverse shear; - homogeneous isotropic linear elasticity, one centered layer, constant thickness; - one documented `2 x 2 x 2` integration path; - nodal `CLOAD` and prescribed global shell DOFs only. Section 15 records a future Total Lagrangian residual and consistent tangent. That section is formulation evidence only. It does not expand the current analysis procedure, mutable state, input subset, or implementation plan. Source labels `S4` and `S4R` both select this one FESA formulation by an approved semantic mapping. They do not select Abaqus integration or stabilization behavior, and this document makes no Abaqus formulation-equivalence claim. Exact drilling reference family/coefficient, drilling-energy warning ratio, smooth-director angle, and geometry thresholds remain Numerical Review decisions. The common dimensionless drilling coordinate, geometry-measure inventory, drilling-load projection tolerance, and normalized algebraic checks are fixed below by the first Numerical Review. No remaining open symbol is an implementation default. ## 2. Scope and assumptions ### 2.1 Included product formulation - Reference coordinates: `(xi, eta, zeta) in [-1,1]^3`. - Source node order: `1=(-1,-1)`, `2=(+1,-1)`, `3=(+1,+1)`, `4=(-1,+1)`. - Global nodal DOF order: `[UX, UY, UZ, URX, URY, URZ]`. - Physical nodal fields: three midsurface translations and two director-tangent rotations. - Numerical nodal field: one director-parallel drilling coordinate. - Material: finite `E > 0`, `-1 < nu < 0.5`. - Section: one centered homogeneous isotropic layer with finite constant `t > 0`. - Plane-stress condition `sigma_33 = 0`; no thickness stretch. - User-consistent units. Angles are dimensionless. - Initial directors are derived from source connectivity and smooth-patch averaging; explicit normals are outside this feature. - External loads are global nodal forces and non-drilling nodal moments. ### 2.2 Excluded product formulation - Geometrically nonlinear execution, follower loads, dynamics, buckling, contact, material nonlinearity, and thermal strain. - Composite or multilayer sections, offsets, variable/distributed thickness, orthotropy, and user material orientation. - Pressure, gravity, body force, edge traction, `DLOAD`, or any distributed-load input. - MITC4+, MITC4/D, EAS/ANS variants other than the shear tying defined here, reduced integration, hourglass control, and selective integration. - A physical drilling strain, drilling stress/resultant, or drilling-direction applied nodal moment. - Shared-node sharp folds, hinges, shell intersections, and shell-beam drilling transfer. A physical fold requires duplicate source nodes. ### 2.3 Kinematic and constitutive assumptions The initial thickness director is a unit vector and thickness is a separate scalar. Straight material lines through the thickness remain straight in the physical five-DOF kinematics. The transverse normal strain and stress are excluded, while transverse shear deformation is retained. The shear correction factor is $$ kappa_s = \frac{5}{6}. $$ The `5/6` value is restricted to this homogeneous rectangular-thickness contract. It is not a general composite-shell rule. ## 3. Coordinates, signs, and location identity ### 3.1 Natural coordinates and positive face The positive thickness direction is `+zeta`. With the approved node order, the positive element normal candidate follows $$ \mathbf n_e \parallel \mathbf A_\xi \times \mathbf A_\eta. $$ The bottom, middle, and top section positions are respectively $$ z=-t/2,\qquad z=0,\qquad z=+t/2, \qquad z=\frac{t}{2}\zeta. $$ Positive section moment is defined by $$ \mathbf M=\int_{-t/2}^{t/2} z\,\boldsymbol\sigma_m(z)\,dz. $$ This convention fixes the curvature sign in Section 14. Reversing source connectivity reverses the positive face and is not silently repaired. ### 3.2 Integration-point local frame At each midsurface location, let the interpolated positive-thickness director be $$ \overline{\mathbf d}=\frac{\sum_I N_I\mathbf d_I} {\left\|\sum_I N_I\mathbf d_I\right\|}. $$ Then define $$ \mathbf e_3=\overline{\mathbf d}, \qquad \mathbf e_1= \frac{\mathbf A_\xi-(\mathbf A_\xi\cdot\mathbf e_3)\mathbf e_3} {\|\mathbf A_\xi-(\mathbf A_\xi\cdot\mathbf e_3)\mathbf e_3\|}, $$ $$ \mathbf e_2=\mathbf e_3\times\mathbf e_1. $$ Thus local direction 1 follows the projected `+xi` covariant tangent, direction 2 completes a right-handed frame, and direction 3 follows the interpolated positive thickness director. The source-order surface normal must have positive dot product with `e_3`; an opposed or degenerate pairing is invalid. The frame is evaluated and stored separately at every required shell location; one element-average frame is not substituted for warped geometry. Frame degeneracy is a geometry error. All generalized strains, resultants, and section stresses in this document use this local frame. Nodal `U/UR` and `RF/RM` remain global. ### 3.3 Stable location identity No recovery values at different locations are averaged to hide mismatches. A shell row is identified at least by source element identity, source element type, internal formulation identity, in-plane natural coordinates, section position when applicable, local frame/director, and component order. Exact HDF5 field names belong to the I/O contract. ## 4. Initial directors and nodal tangent frames ### 4.1 Element normal candidate For element `e`, evaluate the midsurface covariant tangents at the element center: $$ \mathbf A_\xi^e(0,0)=\sum_{I=1}^4 N_{I,\xi}(0,0)\mathbf X_I, \qquad \mathbf A_\eta^e(0,0)=\sum_{I=1}^4 N_{I,\eta}(0,0)\mathbf X_I. $$ The source-order-positive candidate is $$ \mathbf n_e= \frac{\mathbf A_\xi^e\times\mathbf A_\eta^e} {\|\mathbf A_\xi^e\times\mathbf A_\eta^e\|}. $$ Its deterministic surface-area weight is $$ A_e=\sum_{g=1}^{4}w_g \left\|\mathbf A_\xi(\xi_g,\eta_g) \times\mathbf A_\eta(\xi_g,\eta_g)\right\|, $$ using the same four midsurface Gauss locations as the element formulation. ### 4.2 Smooth shared-node director For source node `I`, sort its incident accepted shell elements `E(I)` by stable source-element identity. Before any averaging, require every unordered incident pair to have the same orientation hemisphere: $$ c_{pair,I}=\min_{e0. $$ For a node with only one incident element this pair test is vacuous. A nonpositive pair dot product is an `opposed-incident-normal` geometry error; it is not repaired by flipping a candidate or by letting cancellation occur in the average. This pairwise rule is deterministic and stronger than testing only the final average. After the pairwise test, define $$ \mathbf s_I=\sum_{e\in E(I)} A_e\mathbf n_e, \qquad \mathbf d_I=\frac{\mathbf s_I}{\|\mathbf s_I\|}. $$ Incident elements are accumulated in the same stable order. After averaging, every incident deviation $$ \theta_{eI}=\cos^{-1}\!\left( \operatorname{clamp}(\mathbf n_e\cdot\mathbf d_I,-1,1)\right) $$ must satisfy an approved smooth-patch bound `theta_smooth`. The research value `20 degrees` is only the first Numerical Review candidate. It is not fixed here. Zero or near-zero cross products and averaged vectors fail using approved scale-aware tolerances. They are never replaced with a global axis. ### 4.3 Deterministic nodal tangent frame Let `(g_x,g_y,g_z)` be the global Cartesian basis. Choose the least-aligned basis axis $$ \mathbf g_*= \underset{\mathbf g\in\{\mathbf g_x,\mathbf g_y,\mathbf g_z\}} {\arg\min}\ |\mathbf g\cdot\mathbf d_I|, $$ with ties resolved in the fixed order `x`, `y`, `z`. Then $$ \mathbf a_I= \frac{\mathbf g_*-(\mathbf g_*\cdot\mathbf d_I)\mathbf d_I} {\|\mathbf g_*-(\mathbf g_*\cdot\mathbf d_I)\mathbf d_I\|}, \qquad \mathbf b_I=\mathbf d_I\times\mathbf a_I. $$ The nodal frame `(a_I,b_I,d_I)` is orthonormal and right-handed: `a_I x b_I=d_I`. ## 5. Primary variables and six-to-five DOF embedding ### 5.1 Global and local nodal coordinates At node `I`, the global shell vector is $$ \mathbf q_I^g= \begin{bmatrix} \mathbf u_I\\ \boldsymbol\theta_I^g \end{bmatrix} = \begin{bmatrix} U_X&U_Y&U_Z&UR_X&UR_Y&UR_Z \end{bmatrix}^T. $$ Define $$ \mathbf R_I= \begin{bmatrix}\mathbf a_I&\mathbf b_I&\mathbf d_I\end{bmatrix}, \qquad \begin{bmatrix}\alpha_I\\\beta_I\\\gamma_I\end{bmatrix} =\mathbf R_I^T\boldsymbol\theta_I^g. $$ `alpha` and `beta` are physical director-tangent rotations. `gamma` is the numerical drilling coordinate. Under the small-rotation convention $$ \delta\mathbf d_I =\boldsymbol\theta_I^g\times\mathbf d_I =\beta_I\mathbf a_I-\alpha_I\mathbf b_I, $$ and the `gamma_I d_I` part vanishes identically from director change. ### 5.2 Element transforms Collect the four global nodal vectors as `q_g in R^24`. Define the block transform $$ \mathbf T=\operatorname{blockdiag}(\mathbf T_1,\ldots,\mathbf T_4), \qquad \mathbf T_I= \begin{bmatrix} \mathbf I_3&\mathbf 0\\ \mathbf 0&\mathbf R_I^T \end{bmatrix}. $$ Let `P in R^(20 x 24)` select, for each node, `[u_X,u_Y,u_Z,alpha,beta]`, and let `D_gamma in R^(4 x 24)` select the four `gamma` entries. Then $$ \boxed{\mathbf q_{20}=\mathbf T_p\mathbf q_g, \qquad \mathbf T_p=\mathbf P\mathbf T}, $$ $$ \boxed{\boldsymbol\gamma=\mathbf T_d\mathbf q_g, \qquad \mathbf T_d=\mathbf D_\gamma\mathbf T}. $$ `T_p` is `20 x 24` and `T_d` is `4 x 24`. The physical strain operator acts only on `q_20`; `gamma` must not enter physical strain or recovery. ### 5.3 Virtual work preservation For any physical local force `f_20` and drill force `m_d`, $$ \delta\mathbf q_{20}^T\mathbf f_{20} +\delta\boldsymbol\gamma^T\mathbf m_d =\delta\mathbf q_g^T \left(\mathbf T_p^T\mathbf f_{20}+\mathbf T_d^T\mathbf m_d\right). $$ This identity is the required transformation-energy check. A physical rigid mode is constructed from rigid midsurface translations and tangent-plane director changes; blindly assigning the complete spatial rigid-rotation vector, including its normal projection, to every `UR` entry would excite the numerical drill coordinate and is not the five-DOF rigid mode. ## 6. Strong form and boundary conditions ### 6.1 Three-dimensional parent statement On the reference shell volume `Omega_0`, the linear elastic parent problem is $$ \nabla\cdot\boldsymbol\sigma=\mathbf0 \quad\text{in }\Omega_0, \qquad \boldsymbol\sigma=\mathbb C_{ps}:\boldsymbol\epsilon, $$ with $$ \boldsymbol\epsilon=\operatorname{sym}(\nabla\mathbf u), \qquad \sigma_{33}=0. $$ The continuum strong form explains the element lineage. In the approved product path there is no body force and no surface/edge traction input. ### 6.2 Essential and natural data Prescribed global shell DOFs form the Dirichlet data. The only external generalized forces are aggregated nodal `CLOAD` values. For a nodal moment `M_I`, define $$ \rho_{M,I}=\frac{|\mathbf d_I\cdot\mathbf M_I|}{\|\mathbf M_I\|}. $$ An exactly zero aggregated moment is accepted as a separate zero case and does not form this ratio. Every nonzero moment is accepted only when $$ \boxed{\rho_{M,I}\le 10^{-12}}. $$ Otherwise model validation fails as `unsupported-drilling-load`. The denominator is never clamped. This is a direction/projection check and is invariant under a consistent moment-unit conversion. Distributed natural-boundary terms may appear in the parent continuum derivation, but their existence is not an executable load contract. ## 7. Weak form ### 7.1 Physical virtual work Let `V_24` be the admissible global six-DOF element trial space after essential boundary data are applied, and let `V_24^0` be its homogeneous test space. With $$ \mathbf q_{20}=\mathbf T_p\mathbf q_g, \qquad \delta\mathbf q_{20}=\mathbf T_p\delta\mathbf q_g, $$ the MITC-projected physical internal virtual work is $$ \delta W_{int}^{phys} =\int_{\Omega_0} (\delta\overline{\boldsymbol\epsilon})^T \mathbf C_5 \overline{\boldsymbol\epsilon}\,dV =\delta\mathbf q_{20}^T\mathbf f_{int}^{20} =\delta\mathbf q_g^T\mathbf T_p^T\mathbf f_{int}^{20}, $$ where $$ \mathbf f_{int}^{20} =\int_{\Omega_0}\overline{\mathbf B}^T \mathbf C_5\overline{\boldsymbol\epsilon}\,dV. $$ The overbar denotes the common MITC projection used by strain, residual, and stiffness. The current product external virtual work is $$ \delta W_{ext}=\delta\mathbf q_g^T\mathbf f_e^{CLOAD}. $$ ### 7.2 Numerical drilling potential and complete weak form Drilling regularization is algebraically separate: $$ \Pi_d=\frac12\boldsymbol\gamma^T\mathbf K_d^l\boldsymbol\gamma, \qquad \delta\Pi_d=\delta\boldsymbol\gamma^T \mathbf K_d^l\boldsymbol\gamma. $$ It does not approximate a shell strain energy and produces no physical generalized strain, resultant, or stress. The complete linear 24-DOF equilibrium statement is therefore $$ \boxed{ \delta\mathbf q_g^T\left[ \mathbf T_p^T\mathbf f_{int}^{20} +\mathbf T_d^T\mathbf K_d^l\boldsymbol\gamma -\mathbf f_e^{CLOAD} \right]=0 \qquad\forall\delta\mathbf q_g\in V_{24}^0.} $$ This is the normative weak form. A physical-only statement in `V_20` is merely the restriction of this equation and must not be combined with a 24-DOF external-work term as if both variations occupied the same test space. ## 8. Bilinear discretization and degenerated geometry ### 8.1 Shape functions With nodal signs `(xi_I,eta_I)`, $$ N_I(\xi,\eta)=\frac14(1+\xi_I\xi)(1+\eta_I\eta), $$ or explicitly $$ \begin{aligned} N_1&=\tfrac14(1-\xi)(1-\eta),& N_2&=\tfrac14(1+\xi)(1-\eta),\\ N_3&=\tfrac14(1+\xi)(1+\eta),& N_4&=\tfrac14(1-\xi)(1+\eta). \end{aligned} $$ They must satisfy $$ \sum_I N_I=1, \qquad N_I(\xi_J,\eta_J)=\delta_{IJ}, \qquad \sum_I N_{I,\xi}=\sum_I N_{I,\eta}=0. $$ ### 8.2 Reference geometry For element thickness `t`, $$ \boxed{ \mathbf X(\xi,\eta,\zeta) =\sum_{I=1}^4N_I\mathbf X_I +\frac{t\zeta}{2}\sum_{I=1}^4N_I\mathbf d_I }. $$ The midsurface is `X_0(xi,eta)=X(xi,eta,0)`. The initial covariant bases are $$ \mathbf G_\alpha=\frac{\partial\mathbf X}{\partial\xi^\alpha}, \qquad (\xi^1,\xi^2,\xi^3)=(\xi,\eta,\zeta). $$ ### 8.3 Linear displacement interpolation Using `delta d_I=beta_I a_I-alpha_I b_I`, $$ \boxed{ \mathbf u(\xi,\eta,\zeta) =\sum_{I=1}^4N_I\mathbf u_I +\frac{t\zeta}{2}\sum_{I=1}^4N_I (\beta_I\mathbf a_I-\alpha_I\mathbf b_I) }. $$ Therefore $$ \mathbf u=\mathbf H(\xi,\eta,\zeta)\mathbf q_{20}, \qquad \mathbf H\in\mathbb R^{3\times20}. $$ This interpolation reproduces constant translation. Its physical rigid-rotation test must combine `u_I=omega x X_I` with `delta d_I=omega x d_I` projected into `(a_I,b_I)`. The corresponding global nodal rotation variable is the tangent projection $$ \boldsymbol\theta_I^g =\boldsymbol\omega-(\boldsymbol\omega\cdot\mathbf d_I)\mathbf d_I, $$ so that `gamma_I=0`. ## 9. Mapping, Jacobian, and geometry validity ### 9.1 Covariant and contravariant bases Define $$ \mathbf J= \begin{bmatrix}\mathbf G_\xi&\mathbf G_\eta&\mathbf G_\zeta\end{bmatrix}, \qquad J=\det\mathbf J, $$ and contravariant bases by $$ \mathbf G^\alpha\cdot\mathbf G_\beta=\delta^\alpha_\beta. $$ The volume measure is $$ dV=J\,d\xi\,d\eta\,d\zeta. $$ ### 9.2 Required validation locations `J` and all basis quantities must be finite and valid at: - all eight `2 x 2 x 2` stiffness points; - the four midsurface MITC tying locations; - any additional bottom/middle/top recovery evaluation location before recovery is committed. The center `(0,0,0)` is also included in the orientation and warpage inventory. Duplicate nodes, self-intersection, degenerate midsurface area, and reversed connectivity are separate fail-closed geometry errors. No failed location is discarded or replaced by a value from another point. ### 9.3 Scale-aware measures Let the consecutive midsurface edge inventory be $$ \mathcal E=\{(1,2),(2,3),(3,4),(4,1)\}, \qquad \boxed{L_e=\max_{(I,J)\in\mathcal E}\|\mathbf X_J-\mathbf X_I\|}. $$ `L_e` must be finite and strictly positive. It is the common element length used by geometry checks and the DOF scaling in Section 12.5. At every distinct in-plane location in the center, Gauss, tying, and committed recovery inventory, define $$ a(\xi,\eta)=\|\mathbf A_\xi\times\mathbf A_\eta\|, \qquad \boxed{a_g(\xi,\eta)=\frac{a(\xi,\eta)}{L_e^2}}, $$ $$ \mathbf n_s(\xi,\eta)= \frac{\mathbf A_\xi\times\mathbf A_\eta}{a(\xi,\eta)}, \qquad c_d(\xi,\eta)=\mathbf n_s\cdot\overline{\mathbf d}. $$ `a_g` is the normalized surface-collapse/aspect measure. In particular, for `A_xi=(1,0,0)` and `A_eta=(0,epsilon,0)` with `L_e=O(1)`, `a_g -> 0` as `epsilon -> 0`; the angular measure below alone cannot detect that collapse. At every full three-dimensional validation point, define the dimensionless angular/director determinant measure $$ j_s=\frac{J} {\|\mathbf G_\xi\|\,\|\mathbf G_\eta\|\,\|\mathbf G_\zeta\|}. $$ For all positive finite point determinants, define the element-variation measure $$ \boxed{r_J=\frac{J_{min}}{J_{max}}}, \qquad J_{min}=\min_{p\in\mathcal P_V}J_p, \quad J_{max}=\max_{p\in\mathcal P_V}J_p, $$ and the surface-normal warpage measure relative to the center normal $$ \boxed{\theta_w= \max_{p\in\mathcal P_S} \cos^{-1}\!\left(\operatorname{clamp} (\mathbf n_s(0,0)\cdot\mathbf n_s(p),-1,1)\right)}. $$ Here `P_V` contains every volume Gauss point, tying point at `zeta=0`, center, and every committed bottom/middle/top recovery point; `P_S` contains their distinct in-plane projections. A valid element must satisfy, without denominator clamping, $$ \boxed{ J_p>0,\quad j_{s,p}>\tau_{ang},\quad a_{g,p}>\tau_{area},\quad c_{d,p}>\tau_{dir},\quad r_J>\tau_{var},\quad \theta_w<\theta_{warp}.} $$ The measures and their location inventory are fixed by this formulation revision. The positive dimensionless thresholds remain `needs-numerical-calibration`; they must separate valid distortion/warp sweeps from collapsed negative sequences before Numerical Review may approve them. No `max(1, geometry_scale)`, zero denominator, failed-point omission, or pointwise orientation repair is permitted. ## 10. Linear kinematics and MITC4 shear projection ### 10.1 Direct covariant strain For a physical element coordinate `q_A`, let $$ \mathbf h_A=\frac{\partial\mathbf u}{\partial q_A}, \qquad \mathbf h_{A,\alpha}=\frac{\partial\mathbf h_A}{\partial\xi^\alpha}. $$ The direct covariant small-strain column is $$ B^{DI}_{\alpha\beta,A} =\frac12\left( \mathbf G_\alpha\cdot\mathbf h_{A,\beta} +\mathbf G_\beta\cdot\mathbf h_{A,\alpha} \right). $$ Equivalently, $$ \boldsymbol\epsilon^{DI} =\operatorname{sym}\left( \sum_{\alpha=1}^3 \mathbf u_{,\alpha}\otimes\mathbf G^\alpha \right). $$ The transverse normal component is excluded by the shell constitutive contract. ### 10.2 Canonical tying locations Use $$ T_{\xi-}=(0,-1,0),\qquad T_{\xi+}=(0,+1,0), $$ $$ T_{\eta-}=(-1,0,0),\qquad T_{\eta+}=(+1,0,0). $$ The first pair supplies the covariant `xi-zeta` shear and the second pair supplies the covariant `eta-zeta` shear. Labels such as A/B/C/D are avoided because their assignment varies with published node conventions. ### 10.3 Assumed transverse shear At any in-plane point, $$ \boxed{ \overline\epsilon_{\xi\zeta}(\xi,\eta) =\frac{1-\eta}{2}\epsilon^{DI}_{\xi\zeta}(T_{\xi-}) +\frac{1+\eta}{2}\epsilon^{DI}_{\xi\zeta}(T_{\xi+}) }, $$ $$ \boxed{ \overline\epsilon_{\eta\zeta}(\xi,\eta) =\frac{1-\xi}{2}\epsilon^{DI}_{\eta\zeta}(T_{\eta-}) +\frac{1+\xi}{2}\epsilon^{DI}_{\eta\zeta}(T_{\eta+}) }. $$ All in-plane covariant components remain direct. The assumed covariant tensor is reconstructed with the contravariant bases: $$ \overline{\boldsymbol\epsilon} =\sum_{\alpha,\beta} \overline\epsilon_{\alpha\beta} \mathbf G^\alpha\otimes\mathbf G^\beta. $$ ### 10.4 Local engineering strain vector Transform the tensor to `(e_1,e_2,e_3)` and define $$ \boxed{ \overline{\mathbf e}= \begin{bmatrix} \epsilon_{11}&\epsilon_{22}&\gamma_{12}&\gamma_{13}&\gamma_{23} \end{bmatrix}^T =\overline{\mathbf B}\mathbf q_{20}}, $$ where `gamma_ij=2 epsilon_ij` and `B_bar in R^(5 x 20)`. The normative construction of `B_bar` is: 1. form each direct covariant strain column; 2. replace only its two transverse-shear covariant components by the same tying projection; 3. reconstruct the Cartesian tensor with the contravariant bases; 4. project it into the stored local frame and apply engineering-shear factors. Strain, first variation, and future second variation must use the same linear MITC projection. Using tied shear in residual but direct shear in stiffness is forbidden. ## 11. Constitutive contract ### 11.1 Plane-stress material matrix Let $$ G=\frac{E}{2(1+\nu)}, \qquad \mathbf C_{ps}=\frac{E}{1-\nu^2} \begin{bmatrix} 1&\nu&0\\ \nu&1&0\\ 0&0&(1-\nu)/2 \end{bmatrix}. $$ For the engineering order of Section 10, $$ \boxed{ \mathbf C_5= \begin{bmatrix} \mathbf C_{ps}&\mathbf0\\ \mathbf0&\kappa_sG\mathbf I_2 \end{bmatrix}}, $$ $$ \mathbf s= \begin{bmatrix} \sigma_{11}&\sigma_{22}&\tau_{12}&\tau_{13}&\tau_{23} \end{bmatrix}^T =\mathbf C_5\overline{\mathbf e}. $$ `C_5` is symmetric positive definite for the approved material range. `sigma_33=0` is an assumption, not an emitted stress row. There are no material state variables, history variables, or constitutive update in the approved linear elastic path. ### 11.2 Centered-section matrices as a cross-check For an exactly linear in-plane strain through thickness, $$ \mathbf A=t\mathbf C_{ps},\qquad \mathbf B=\mathbf0,\qquad \mathbf D=\frac{t^3}{12}\mathbf C_{ps},\qquad \mathbf A_s=\kappa_sGt\mathbf I_2. $$ These matrices are recovery and verification identities. The normative element stiffness remains the source-faithful volume integration in Section 12, so curved or warped mapping terms are not silently replaced by a flat analytical section kernel. ## 12. Linear element equations and drilling stabilization ### 12.1 Physical 20-DOF kernel Using the quadrature of Section 13, $$ \boxed{ \mathbf K_{20} =\int_{\Omega_0}\overline{\mathbf B}^T \mathbf C_5\overline{\mathbf B}\,dV \approx\sum_{g=1}^{8} \overline{\mathbf B}_g^T\mathbf C_5\overline{\mathbf B}_g J_gw_g}, $$ $$ \mathbf K_{20}\in\mathbb R^{20\times20}, \qquad \mathbf f_{int}^{20}=\mathbf K_{20}\mathbf q_{20}. $$ The physical global contribution is $$ \boxed{ \mathbf K_{phys}^{24}=\mathbf T_p^T\mathbf K_{20}\mathbf T_p}, \qquad \mathbf f_{phys}^{24}=\mathbf K_{phys}^{24}\mathbf q_g. $$ ### 12.2 Drilling candidate contract Let $$ \mathbf K_d^l=\operatorname{diag}(k_{d,1},k_{d,2},k_{d,3},k_{d,4}), \qquad k_{d,I}>0, $$ with rotational-stiffness units `force*length`. The common physical normalization is $$ D_{iso}=\frac{Et^3}{12(1-\nu^2)}, \qquad \boxed{\rho_{d,I}=\frac{k_{d,I}}{D_{iso}}}. $$ `rho_d,I` is dimensionless and is the only common coordinate for comparing drilling families. For any candidate `c` written as $$ k_{d,I}^{(c)}=\alpha_d^{(c)}k_{ref,I}^{(c)}, $$ the candidate-specific conversion is $$ \boxed{ \rho_{d,I}^{(c)}=\alpha_d^{(c)} \frac{k_{ref,I}^{(c)}}{D_{iso}}, \qquad \alpha_{d,I}^{eq,(c)}=\rho_{d,I}^{(c)} \frac{D_{iso}}{k_{ref,I}^{(c)}}.} $$ The second expression is the nodewise equivalent coefficient for a target `rho_d,I`. A single actual candidate coefficient may therefore generate a range of `rho_d,I`; that entire range is part of the calibration evidence. The dimensionally compatible candidate distributions carried from research are: 1. transverse-shear/area transition family $$ k_{ref,I}^{(A)}= \frac{GtA_{eI}}{1+qA_{eI}/t^2}, \qquad q=2.5\times10^{-5}, $$ where $$ A_{eI}=\int_{A_e}N_I\,dA \approx\sum_{g=1}^{4}N_I(\xi_g,\eta_g) \|\mathbf A_\xi\times\mathbf A_\eta\|_g w_g; $$ 2. isotropic bending rigidity $$ k_{ref}^{(B)}=D_{iso}, \qquad \rho_{d,I}^{(B)}=\alpha_d^{(B)}; $$ 3. a documented positive statistic formed only from the physical rotational block of `K_20`, whose entries all have `force*length` units, converted by the same `k_ref/D_iso` ratio. A raw statistic is not comparable until this conversion is reported. The first two candidate scales differ sharply in the thin-shell limit: $$ \boxed{\displaystyle \lim_{A_{eI}/t^2\to\infty} k_{ref,I}^{(A)}/D_{iso}=6(1-\nu)/q}. $$ For `nu=0.3` and `q=2.5e-5`, this ratio is `168000`. Consequently the same raw coefficient, including `10^-3`, cannot represent the same small drilling stiffness for candidates A and B. The thesis rule `10^-3 min(all K_ii)` is not admissible because it can mix translational `force/length` and rotational `force*length` diagonals. A sweep must instead expand logarithmically in actual `rho_d,I` until it brackets both: 1. a low-side scaled-rank/conditioning or factorization failure; and 2. a high-side physical `U/N/M/Q` contamination boundary. A nominal value may be proposed only as the smallest point in a stable plateau, with the adjacent lower and higher decades and separate physical/drilling energies reported. The reference family, plateau, nominal value, and response/energy bounds remain `needs-numerical-calibration`; no common `10^-3` center is retained. ### 12.3 Stabilized 24-DOF matrix The global drilling contribution and total element matrix are $$ \boxed{ \mathbf K_{drill}^{24}=\mathbf T_d^T\mathbf K_d^l\mathbf T_d}, $$ $$ \boxed{ \mathbf K_e^{24}=\mathbf K_{phys}^{24}+\mathbf K_{drill}^{24}}, $$ $$ \mathbf f_{int}^e=\mathbf K_e^{24}\mathbf q_g, \qquad \mathbf r_e=\mathbf f_{int}^e-\mathbf f_e^{CLOAD}. $$ No element distributed-load integral exists in the approved product routine. Mass and damping matrices are `N/A` for this linear-static feature. For a valid free isolated element, the expected physical rank is 14. Embedding it in 24 coordinates creates the six physical rigid modes plus four drilling null modes. Four positive independent `k_d,I` values should remove only those drilling modes, giving expected stabilized rank 18 and nullity 6. These are verification targets, not substitutes for the scaled singular-value/rank study defined in Section 12.5. The exact-arithmetic rank statement is independent of the calibrated numerical-rank threshold. ### 12.4 Energy split The element energies are $$ \boxed{ E_{phys}^e=\frac12\mathbf q_g^T \mathbf K_{phys}^{24}\mathbf q_g =\frac12\mathbf q_{20}^T\mathbf K_{20}\mathbf q_{20}}, $$ $$ \boxed{ E_{drill}^e=\frac12\mathbf q_g^T \mathbf K_{drill}^{24}\mathbf q_g =\frac12\boldsymbol\gamma^T\mathbf K_d^l\boldsymbol\gamma}. $$ Both have units `force*length` and are aggregated separately in stable source order. The ratio `E_drill/E_phys` is reported only when mathematically classifiable. If `E_phys` is zero or near zero, the two energies are reported explicitly; no arbitrary denominator clamp is used. The warning ratio remains open. ### 12.5 DOF scaling for rank and conditioning evidence Raw shell stiffness matrices mix translational and rotational units and therefore must not be used for singular-value, eigenvalue, rank, or condition-number acceptance. Define diagnostic coordinate scalings $$ \mathbf q_{20}=\mathbf S_{20}\widehat{\mathbf q}_{20},\qquad \mathbf S_{20}=\operatorname{blockdiag}_{I=1}^{4}(L_e\mathbf I_3,\mathbf I_2), $$ $$ \mathbf q_g=\mathbf S_{24}\widehat{\mathbf q}_g,\qquad \mathbf S_{24}=\operatorname{blockdiag}_{I=1}^{4}(L_e\mathbf I_3,\mathbf I_3). $$ The corresponding scaled element matrices are $$ \boxed{\widehat{\mathbf K}_{20}=\mathbf S_{20}^T\mathbf K_{20}\mathbf S_{20}, \qquad \widehat{\mathbf K}_e=\mathbf S_{24}^T\mathbf K_e^{24}\mathbf S_{24}}. $$ Every entry of these matrices has units `force*length`. Rigid and other diagnostic vectors are transformed by `q_hat=S^{-1}q`. Scaling is used only for algebraic evidence; it does not modify the physical assembly, prescribed values, or solve. For a global shell model, use the deterministic model length $$ L_m=\max_{e\in\mathcal E_{active}}L_e $$ and construct the analogous full-model scaling with `(L_m I_3,I_3)` per six-DOF node. Restrict it to the stable free-DOF order as `S_f` and define $$ \widehat{\mathbf K}_{ff}=\mathbf S_f^T\mathbf K_{ff}\mathbf S_f. $$ Global condition and numerical-rank evidence uses `K_hat_ff`; a valid `0 x 0 Kff` case is classified separately and is not reported as singular. Numerical rank/condition thresholds remain calibration decisions, but no raw mixed-unit matrix may be used to choose them. ## 13. Numerical integration ### 13.1 Stiffness rule Use tensor-product Gauss points $$ \xi,\eta,\zeta\in\left\{-\frac1{\sqrt3},+\frac1{\sqrt3}\right\}, \qquad w_\xi=w_\eta=w_\zeta=1. $$ Thus the physical kernel has four midsurface locations and two thickness locations, for eight volume evaluations. At each in-plane Gauss location: 1. evaluate and validate the midsurface local frame; 2. evaluate the four tying values once at `zeta=0`; 3. use the same tied covariant shear interpolation at both thickness points; 4. evaluate the remaining strain, mapping, material, and volume measure at the actual thickness point. `S4` and `S4R` use this identical rule. One-point reduced integration and Abaqus hourglass control are not selected by the `S4R` source label. ### 13.2 Prohibited quadrature substitutions - replacing `2 x 2` midsurface integration with `1 x 1`; - using direct shear at any stiffness point; - evaluating tying values from a different geometry or director inventory; - averaging failed or missing tying values; - changing the rule based on source `S4` versus `S4R`; - using higher-order quadrature in production without reopening Formulation and Numerical Review. Higher-order or analytical integration may be used only as an independent verification cross-check. ## 14. Output recovery ### 14.1 Nodal solution, reaction, and equilibrium Store at every source node, in global coordinates, $$ [U1,U2,U3,UR1,UR2,UR3] $$ and $$ [RF1,RF2,RF3,RM1,RM2,RM3]. $$ The reaction/equilibrium vector is the assembled full residual $$ \mathbf r=\mathbf K\mathbf d-\mathbf F. $$ Constrained components are physical reactions; free components are residual evidence. Reaction is not reconstructed by summing section resultants. For a fixed global reference point `X_o`, the force and moment balance evidence is $$ \mathbf e_F=\sum_I\left(\mathbf F_I^{CLOAD}+\mathbf R_I\right), $$ $$ \mathbf e_M=\sum_I\left[ (\mathbf X_I-\mathbf X_o)\times (\mathbf F_I^{CLOAD}+\mathbf R_I) +\mathbf M_I^{CLOAD}+\mathbf{RM}_I\right]. $$ Only constrained residual components contribute to `R/RM`; free components remain separate residual evidence. Normalization and acceptance thresholds belong to Numerical Review and the I/O verification contract. ### 14.2 Generalized strain by thickness moments At each of the four midsurface Gauss locations, let $$ \mathbf e_m(z)= \begin{bmatrix}\epsilon_{11}&\epsilon_{22}&\gamma_{12}\end{bmatrix}^T, \qquad \boldsymbol\gamma_s(z)= \begin{bmatrix}\gamma_{13}&\gamma_{23}\end{bmatrix}^T, $$ evaluated in the same stored local frame. Define $$ \boldsymbol\epsilon_0= \frac1t\int_{-t/2}^{t/2}\mathbf e_m(z)\,dz, $$ $$ \boldsymbol\kappa= \frac{12}{t^3}\int_{-t/2}^{t/2}z\,\mathbf e_m(z)\,dz, $$ $$ \boldsymbol\gamma_0= \frac1t\int_{-t/2}^{t/2}\boldsymbol\gamma_s(z)\,dz. $$ Use the same two-point thickness quadrature: $$ \int_{-t/2}^{t/2}f(z)\,dz \approx\frac t2\sum_{h=1}^2w_h f(t\zeta_h/2). $$ The mandatory generalized strain order is $$ \boxed{ [E11,E22,G12,K11,K22,K12,G13,G23] =[\boldsymbol\epsilon_0,\boldsymbol\kappa, \boldsymbol\gamma_0]}. $$ Membrane and shear strains are dimensionless; curvature has units `1/length`. For an exactly linear in-plane field, `e_m(z)=epsilon_0+z kappa`, fixing the sign convention. ### 14.3 Section resultants With $$ \boldsymbol\sigma_m= \begin{bmatrix}\sigma_{11}&\sigma_{22}&\tau_{12}\end{bmatrix}^T, \qquad \boldsymbol\tau_s= \begin{bmatrix}\tau_{13}&\tau_{23}\end{bmatrix}^T, $$ define $$ \mathbf N=\int_{-t/2}^{t/2}\boldsymbol\sigma_m\,dz, \qquad \mathbf M=\int_{-t/2}^{t/2}z\boldsymbol\sigma_m\,dz, \qquad \mathbf Q=\int_{-t/2}^{t/2}\boldsymbol\tau_s\,dz. $$ The mandatory order is $$ \boxed{ [N11,N22,N12,M11,M22,M12,Q13,Q23] =[\mathbf N,\mathbf M,\mathbf Q]}. $$ `N` and `Q` have units `force/length`; `M` has units `force`. For the centered homogeneous linear-through-thickness case, $$ \mathbf N=\mathbf A\boldsymbol\epsilon_0, \qquad \mathbf M=\mathbf D\boldsymbol\kappa, \qquad \mathbf Q=\mathbf A_s\boldsymbol\gamma_0, $$ which is a required recovery cross-check. ### 14.4 Bottom, middle, and top in-plane stress At each midsurface Gauss location, perform additional recovery evaluations at `zeta=-1,0,+1` and emit only $$ \boxed{[S11,S22,S12]}. $$ These are direct section-position evaluations, not extrapolations from a different location. `S33=0` is documented but not emitted. `S13/S23` point stresses are not emitted because the approved external contract carries transverse shear through `Q13/Q23`. ### 14.5 No nodal extrapolation Element generalized quantities and section stresses remain at their defined shell locations. This formulation does not define nodal averaging or extrapolation. ## 15. Future-only geometrically nonlinear residual and tangent > **Non-executable boundary:** This section records the requested future formulation. > It must not be routed through the current linear-static procedure or state. The > equations through Section 15.3 live only in a 20-coordinate physical director > chart; they are not a complete global 24-DOF nonlinear element. ### 15.1 Total Lagrangian kinematics Let `q_20` be the physical nonlinear coordinate vector with three translations and two director parameters per node. In the reference configuration, $$ \mathbf x(\xi,\eta,\zeta;\mathbf q_{20}) =\sum_I N_I(\mathbf X_I+\mathbf u_I) +\frac{t\zeta}{2}\sum_I N_I\mathbf d_I(\boldsymbol\phi_I), $$ where `d_I(phi_I)` is a unit-director update defined by an approved finite-rotation map. A candidate two-parameter exponential chart is $$ \mathbf d_I(\boldsymbol\phi_I)= \exp\!\left([ \phi_{1I}\mathbf a_I+\phi_{2I}\mathbf b_I]_{\times}\right) \mathbf d_I^0. $$ The deformation gradient and Green-Lagrange strain are $$ \mathbf F=\mathbf x_{,\alpha}\otimes\mathbf G^\alpha, \qquad \mathbf E=\frac12(\mathbf F^T\mathbf F-\mathbf I). $$ For physical chart coordinates `q_20,A` and `q_20,B`, define $$ \mathbf h_A=\frac{\partial\mathbf x}{\partial q_{20,A}}, \qquad \mathbf h_{AB}=\frac{\partial^2\mathbf x} {\partial q_{20,A}\partial q_{20,B}}. $$ The covariant Green-Lagrange components and their exact first and second derivatives are $$ E_{\alpha\beta}=\frac12\left( \mathbf x_{,\alpha}\cdot\mathbf x_{,\beta} -\mathbf G_\alpha\cdot\mathbf G_\beta\right), $$ $$ \boxed{ E_{\alpha\beta,A}=\frac12\left( \mathbf h_{A,\alpha}\cdot\mathbf x_{,\beta} +\mathbf x_{,\alpha}\cdot\mathbf h_{A,\beta}\right)}, $$ $$ \boxed{ \begin{aligned} E_{\alpha\beta,AB}=\frac12\big(& \mathbf h_{AB,\alpha}\cdot\mathbf x_{,\beta} +\mathbf x_{,\alpha}\cdot\mathbf h_{AB,\beta}\\ &+\mathbf h_{A,\alpha}\cdot\mathbf h_{B,\beta} +\mathbf h_{B,\alpha}\cdot\mathbf h_{A,\beta} \big). \end{aligned}} $$ For translational coordinates, `h_AB=0`. Rotation-rotation blocks retain the exact second derivative of the director map; mixed-node blocks of `h_AB` are zero for the nodal interpolation above. The quadratic products of `h_A` and `h_B` remain and form the stress-dependent geometric contribution even when `h_AB=0`. Apply the same covariant MITC projection to the two transverse shear components of `E`, its first variation, and its second variation: $$ \overline{\mathbf E}=\mathcal P_{MITC}(\mathbf E), $$ $$ \delta\overline{\mathbf E} =\mathcal P_{MITC}(\delta\mathbf E), \qquad \delta\Delta\overline{\mathbf E} =\mathcal P_{MITC}(\delta\Delta\mathbf E). $$ The exact first and second derivatives of the chosen director map are mandatory. The mixed director Hessian is not assumed zero merely because the linearized small-rotation expression is linear. Tensor-to-engineering transformation for the future material law uses the fixed initial local frame at each reference integration point. Consequently `B_A` and `G_AB` below are obtained by applying, in order, the MITC projection, the fixed reference-frame tensor transformation, and the engineering-shear factors to the explicit derivatives above. A future rotating output frame is a recovery decision and must not be inserted into the constitutive tangent without its own derivatives. ### 15.2 Residual Use second Piola-Kirchhoff stress `S` work-conjugate to `E`. In engineering-vector notation, define $$ \mathbf B_A(\mathbf q_{20})= \frac{\partial\overline{\mathbf e}}{\partial q_{20,A}}. $$ For the geometrically nonlinear but materially linear candidate, $$ \mathbf s=\mathbf C_5\overline{\mathbf e}, \qquad \mathbf C_T=\mathbf C_5, $$ interpreted as a second-Piola/Green-Lagrange St. Venant-Kirchhoff-type shell law in the fixed reference frame with the same plane-stress and shear-correction boundary as the linear kernel. A different finite-strain or material-nonlinear law requires a new constitutive formulation decision. Then the physical internal residual is $$ \boxed{ r_A^{phys}(\mathbf q_{20}) =\int_{\Omega_0}\mathbf B_A^T\mathbf s\,dV}. $$ Collecting these entries gives the physical chart residual `r_20^phys(q_20) in R^20`. A total 24-DOF residual is deliberately not written at this point: drilling and external load can be combined with the physical residual only after the nonlinear 20-to-24 coordinate map in Section 15.4 is selected. ### 15.3 Consistent material and geometric tangent Let $$ \mathbf C_T=\frac{\partial\mathbf s} {\partial\overline{\mathbf e}}, \qquad \mathbf G_{AB}=\frac{\partial^2\overline{\mathbf e}} {\partial q_{20,A}\partial q_{20,B}}. $$ The consistent `20 x 20` physical-chart tangent is $$ \boxed{ K_{AB}^{phys}=K_{AB}^{mat}+K_{AB}^{geo}}, $$ $$ \boxed{ K_{AB}^{mat}=\int_{\Omega_0} \mathbf B_A^T\mathbf C_T\mathbf B_B\,dV}, $$ $$ \boxed{ K_{AB}^{geo}=\int_{\Omega_0} \mathbf s^T\mathbf G_{AB}\,dV}. $$ `K_geo` contains the stress-dependent second variation of Green-Lagrange strain, including consistent finite-director derivatives. These equations define `K_20^phys=K_20^mat+K_20^geo`; they do not yet define congruence to a global 24-DOF tangent. For a constant generalized dead-load vector in this selected 20-coordinate chart, its chart load tangent is zero. Follower pressure and other configuration-dependent loads are outside scope. Finite-rotation nodal-moment work must be separately defined before assuming its load tangent is zero. ### 15.4 Unresolved 20-to-24 mapping and drilling boundary Let a future finite global six-DOF coordinate vector be `q_g` and suppose an approved nonlinear map exists: $$ \mathbf q_{20}=\boldsymbol\Phi(\mathbf q_g),\qquad \mathbf A(\mathbf q_g)=\partial\boldsymbol\Phi/\partial\mathbf q_g. $$ Here `A` is a `20 x 24` mapping Jacobian. Conditional on that map, virtual work gives $$ \mathbf r_g^{phys}=\mathbf A^T\mathbf r_{20}^{phys}. $$ Its consistent global physical tangent must contain both the congruence and the coordinate-map curvature term: $$ \boxed{\mathbf K_g^{phys}=\mathbf A^T\mathbf K_{20}^{phys}\mathbf A+\sum_{a=1}^{20}r_{20,a}^{phys}(\partial^2\Phi_a/\partial\mathbf q_g^2)}. $$ The candidate two-parameter director chart in Section 15.1 does not by itself define `Phi`: a finite three-component global rotation coordinate, its director-parallel gauge, chart update/recentering, and the first and second derivatives of the complete map are still unspecified. Likewise, a future drilling potential would have to be objective and expressed in the same global coordinates: $$ \Pi_d=\frac12\boldsymbol\gamma(\mathbf q_g)^T \mathbf K_d^l(\mathbf q_g)\boldsymbol\gamma(\mathbf q_g), \qquad \mathbf r_g^{drill}=\frac{\partial\Pi_d}{\partial\mathbf q_g}, \qquad \mathbf K_g^{drill}=\frac{\partial^2\Pi_d}{\partial\mathbf q_g^2}. $$ A constant initial-frame diagonal penalty is not automatically objective under large rotation. The nonlinear frame, drilling coordinate, scale update, and all their first/second derivatives remain unresolved. Until those choices and configuration-dependent load work are approved, neither a complete global residual nor a complete global 24-DOF tangent exists. This does not block the current linear kernel but blocks geometrically nonlinear implementation. ### 15.5 Newton equation and linear limit Only after Section 15.4 is closed may the global residual and tangent be defined as $$ \mathbf r_g=\mathbf A^T\mathbf r_{20}^{phys}+\mathbf r_g^{drill}-\mathbf f_{ext}, \qquad \mathbf K_T=\mathbf K_g^{phys}+\mathbf K_g^{drill}-\mathbf K_g^{load}. $$ The conditional Newton equation at iteration `k` is $$ \mathbf K_T(\mathbf q_g^{(k)})\Delta\mathbf q_g=-\mathbf r_g(\mathbf q_g^{(k)}), \qquad \mathbf q_g^{(k+1)}=\mathbf q_g^{(k)}+\Delta\mathbf q_g. $$ At the undeformed, stress-free state, recovering the current linear formulation requires all of the following identities: $$ \mathbf A_0=\mathbf T_p,\qquad \mathbf r_{20}^{phys}=\mathbf0, \qquad \mathbf K_{20}^{geo}=\mathbf0. $$ Then the coordinate-map curvature term vanishes and $$ \mathbf K_g^{phys}=\mathbf T_p^T\mathbf K_{20}\mathbf T_p=\mathbf K_{phys}^{24}. $$ If the future map also recovers `gamma=T_d q_g` and the approved constant linear drill block in this limit, the complete tangent reduces to `K_e^24`. This is a conditional consistency requirement, not evidence that a nonlinear `Phi` or objective drilling potential has already been selected. ## 16. Algorithm pseudocode ### 16.1 Deterministic preprocessing ```text for each shell element in stable source order: validate four distinct source nodes and source-order geometry compute L_e from the four consecutive midsurface edges compute center positive normal candidate n_e compute 2x2 surface area A_e for each shell source node in stable source order: gather incident candidates in stable element order reject any nonpositive pairwise incident-normal dot product before averaging reject degenerate or too-sharp incident normals d_I = normalize(sum(A_e * n_e)) select least-aligned global axis with deterministic tie break construct right-handed (a_I, b_I, d_I) ``` ### 16.2 Linear element kernel ```text input: X_I, d_I, a_I, b_I, E, nu, t, q_g, nodal CLOAD share build T, T_p, T_d initialize K20[20,20] = 0 evaluate the complete center/Gauss/tying/recovery geometry inventory validate pointwise J, j_s, a_g, c_d and aggregate r_J, theta_w evaluate and validate four midsurface tying locations for each 2x2 midsurface Gauss location in fixed order: construct and validate local frame (e1,e2,e3) compute the four direct covariant tying shear B columns at zeta=0 for each thickness Gauss point in fixed order: build degenerated geometry, J, reciprocal bases, H derivatives reuse the validated point geometry and reciprocal bases form direct covariant B columns replace only xi-zeta and eta-zeta shear by MITC tying interpolation transform to local engineering B_bar[5,20] K20 += B_bar^T * C5 * B_bar * J * weight check K20 finite and symmetric within approved normalized tolerance Kphys24 = T_p^T * K20 * T_p construct positive Kd_local and report every k_d,I through rho_d,I = k_d,I/D_iso Kdrill24 = T_d^T * Kd_local * T_d Ke24 = Kphys24 + Kdrill24 form S20, S24, Khat20, and Khat_e for rank/conditioning evidence only fint24 = Ke24 * q_g residual24 = fint24 - f_CLOAD return matrices, residual, transforms, frames, and separate energy operators ``` ### 16.3 Global linear-static lifecycle ```text assemble all Ke24 contributions with stable element-local COO ordering form model-length DOF scaling and Khat_ff for global rank evidence only partition full K into Kff, Kfc, Kcf, Kcc in stable free/constrained order factorize Kff before load assembly assemble and deterministically aggregate nodal CLOAD accept an exact-zero nodal moment separately; otherwise require rho_M <= 1e-12 solve Kff * df = Ff - Kfc * dc reconstruct full displacement d compute full residual r = K*d - F recover shell rows and physical/drilling energies in stable source order validate complete finite candidate state/output, then commit ``` ### 16.4 Recovery ```text for each element and each 2x2 midsurface location in fixed order: evaluate two thickness Gauss strains/stresses with the stiffness formulation integrate thickness zeroth/first moments for generalized strain/resultants independently evaluate S11,S22,S12 at zeta = -1, 0, +1 attach exact natural coordinates, section position, frame, and source identity recover nodal global U/UR and full-residual RF/RM compute E_physical and E_drill separately; never clamp a near-zero denominator ``` ### 16.5 Future nonlinear tangent check ```text given a future approved 20-coordinate finite-director chart: evaluate physical residual r20(q20) and consistent K20(q20) verify its directional derivative given an approved global Phi map, objective drill potential, and load work: evaluate global residual rg(qg) and complete consistent K_T(qg) for several normalized perturbation directions p and decreasing h: compare K_T*p with [rg(qg+h*p)-rg(qg-h*p)]/(2*h) require the error to decrease in the expected truncation range ``` ## 17. Verification contract ### 17.1 Algebraic and geometry checks - Shape-function partition of unity, Kronecker delta, and derivative sums. - Nodal and integration frames orthonormal and right-handed. - The complete `J/j_s/a_g/c_d/r_J/theta_w` inventory at center, Gauss, tying, and committed recovery points. - Scaled `K20`, `Kphys24`, `Kdrill24`, and `Ke24` symmetry and spectrum. - Transformation work/energy invariance. - Physical rigid modes satisfy normalized scaled stiffness action. - Stabilized free-element nullity is exactly six; accepted non-rigid physical modes have positive physical energy. - Pure drill vectors have zero physical energy and positive drilling energy. - Consistent force/length unit rescaling leaves dimensionless decisions unchanged. For any nonzero scaled stiffness under test, the approved normalized checks are the following. Here `r_hat` denotes a constructed scaled rigid-mode vector, not the assembled residual. $$ e_{sym}=\|\widehat{\mathbf K}-\widehat{\mathbf K}^T\|_F/\|\widehat{\mathbf K}\|_F\le10^{-12}, $$ $$ e_{rigid}=\|\widehat{\mathbf K}\widehat{\mathbf r}\|_2/(\|\widehat{\mathbf K}\|_2\|\widehat{\mathbf r}\|_2)\le10^{-10}, $$ $$ e_{frame}=\|\mathbf R^T\mathbf R-\mathbf I\|_F\le10^{-12}. $$ For a nonzero transformation-energy case, $$ e_T=|E_g-E_l|/(|E_g|+|E_l|)\le10^{-12}. $$ A zero matrix/vector denominator is invalid test construction and is not clamped to pass. When both transformation energies are exactly zero, the rigid or pure-null case is classified by its separate stiffness-action test. Linear-system residual and global-equilibrium evidence retain the normalized `1e-10` requirement. ### 17.2 Patch and sign checks Independently verify: - constant membrane strain/stress and `N` sign; - pure bending about both local axes, `K11/K22`, `M`, and bottom/top stress sign; - constant transverse shear and `Q13/Q23` order; - pure twist and `K12/M12` convention; - zero strain/resultant/stress contribution from a pure drilling vector. ### 17.3 Locking, distortion, and curved shells - Thin and thick plate/shell mesh and thickness sequences are required; one displacement on one mesh is insufficient. - Distorted and warped valid quadrilaterals must be swept through approved geometry measures. - Original MITC4 controls transverse-shear locking but can retain membrane locking in distorted curved meshes. This is a known limitation, not permission to add MITC4+. - Preferred nodal-load-compatible curved benchmarks are the pinched cylinder and NAFEMS LE3 hemispherical shell. Scordelis-Lo is admissible only after an equivalent nodal-load adaptation is documented. ### 17.4 Drilling sensitivity For every candidate reference scale, convert candidate coefficients to the actual nodewise `rho_d,I` inventory. Expand a logarithmic sweep until both the low-side rank/conditioning failure and high-side physical-response contamination boundary are observed, and record: - free-element scaled rank and scaled constrained-system conditioning; - global `U` and physical `N/M/Q` sensitivity; - `E_phys` and `E_drill` without denominator clamping; - invariance under consistent unit conversion, thickness ratios, and mesh sizes. Candidate runs are compared by overlapping actual `rho_d,I` ranges, never by equal raw `alpha_d`. The study must select the reference family, the smallest stable plateau value, its adjacent-decade sensitivity, and the energy warning criterion before Implementation Planning. ### 17.5 Reference-comparison boundary Abaqus comparisons block only on matched global `U1/U2/U3` rows under the approved mixed tolerance decided downstream. `UR1/UR2/UR3` is fully reported and may emit a deterministic nonblocking large-error warning, but it does not change pass/fail. FESA `S4` and `S4R` inputs must produce the same internal numerical rows for identical supported models while preserving distinct source metadata. Abaqus S4 and S4R are not expected to be numerically identical on finite meshes. ### 17.6 Future nonlinear tangent verification Before any geometrically nonlinear implementation, verify residual directional derivatives, tangent symmetry for conservative loading, objectivity under large rigid motion, the first/second derivatives of `Phi`, the coordinate-map curvature term, objective drilling, zero stress-free geometric stiffness, and convergence of Newton iterations. These checks are future-only and do not authorize a nonlinear procedure. ## 18. Numerical risks | Risk | Consequence | Required control | | --- | --- | --- | | Transverse-shear locking | overly stiff thin-shell response | exact edge-midpoint MITC projection and thickness/mesh convergence | | Membrane locking on distorted curved meshes | slow or nonuniform convergence | distortion/curvature sweeps; document original MITC4 limitation | | Volumetric locking | N/A for the approved plane-stress shell contract | do not infer a three-dimensional incompressible formulation | | Wrong tying pair or engineering-shear factor | swapped/incorrect shear and loss of patch consistency | component-level tying and patch tests | | Reversed or degenerate Jacobian | invalid basis, sign, or energy | common location inventory with `J/j_s/a_g/c_d/r_J/theta_w` | | Discontinuous shared director | artificial coupling or undefined frame | reject; require duplicate nodes at folds | | Fixed-axis tangent singularity | nondeterministic rotation transform | least-aligned global-axis construction | | Drilling coefficient too small | rank/conditioning failure | rank and conditioning sensitivity sweep | | Drilling coefficient too large | contaminated displacement/resultant | physical-output and separate-energy sensitivity sweep | | Mixed-unit drilling or spectrum scale | unit-dependent stabilization/rank | use `rho_d,I` and `S^T K S`; prohibit raw mixed-unit comparison | | Misconstructed rigid test | false drill energy in a physical mode | use rigid translation plus tangent director change with `gamma=0` | | Recovery/stiffness mismatch | inconsistent energy and section output | same frames, tying, material, and thickness rule | | Location averaging | hidden sign/identity error | preserve exact location rows; no nodal extrapolation | | Treating S4R as reduced FESA integration | divergent kernel and unsupported hourglass behavior | one documented rule for S4/S4R | | Nonlinear director Hessian omission | inconsistent future tangent | exact first/second derivative of approved rotation map | | Missing nonlinear 20-to-24 map Hessian | incomplete global tangent | require `Phi`, `A`, and coordinate-map curvature term | | Nonobjective nonlinear drill penalty | artificial large-rotation energy | future review of rotating frame and drill potential | ## 19. Evidence basis and applicability ### 19.1 Repository research sources The detailed source tiers, extracted facts, page references, benchmark provenance, and evidence limits are owned by `docs/research/linear-static-mitc4-shell-research.md`. The primary local source set under `docs/reference-papers/MITC4/` includes: - `AContinuumMechanicsBasedFourNodeShell_001.md` and `_002.md`; - `FourNodeQuadrilateralShellElementMITC4_001.md`; - `MITC공부_001.md` and `_002.md`; - `유한요소해석법을이용한쉘구조물의동적좌굴해석_001.md` through `_008.md`; - `쉘구조물의유한요소해석에대하여_001.md` and `_002.md`. The evidence-backed core is the degenerated-continuum geometry, 20 physical DOFs, edge-midpoint covariant shear tying, plane-stress constitutive response, and `2 x 2` midsurface plus two-point thickness integration. Six-global-DOF drilling regularization is a FESA interface/stability layer and must not be described as the physical MITC4 strain field. ### 19.2 FEM wiki cross-checks - `[[MITC4 Shell Element]]`: four-node degenerated-continuum kinematics, two director-tangent rotations, and edge-midpoint assumed shear. - `[[MITC Shell Kinematics]]`: midsurface/director/thickness interpolation. - `[[Assumed Transverse Shear Strain Interpolation]]`: locking mechanism and tying rationale. - `[[Continuum Mechanics Based Four-Node Shell Element]]`: three-dimensional virtual work lineage and benchmark thread. - `[[Shell Locking Phenomenon]]`: separate transverse-shear and curved-shell membrane locking risks. - `[[Total Lagrangian Shell Formulation]]` and `[[Green-Lagrange Strain Linearization]]`: future residual and material/geometric tangent separation. Wiki pages are navigation and cross-check evidence; the approved requirements and research brief remain the project source of truth. ## 20. Requirement traceability | Requirement group | Formulation coverage | Remaining owner | | --- | --- | --- | | `001-004`, `030`, `037` | linear-static boundary; S4/S4R one FESA path, source identity distinct | I/O, planning | | `005`, `031-038` | 24 global DOFs; 20 physical plus four drill coordinates; `rho_d,I`, scaled rank, energy | Numerical Review for drill calibration | | `006-010` | isotropic plane stress, one centered constant-thickness layer | I/O validation | | `011-016` | pairwise normals, deterministic averaging/frames, complete geometry measures | Numerical Review for calibrated thresholds | | `017-020` | global 24-DOF virtual work; `rho_M <= 1e-12`; distributed loads excluded | I/O diagnostic/schema | | `024-029` | deterministic element buffers, partitioned linear lifecycle, full-residual reaction | planning | | `039-048` | nodal/global and shell/local recovery inventory, units, identities, energy split | I/O schema | | `049-057` | scaled normalized invariants, patches, locking, geometry, curved shells, drilling, equilibrium | Numerical Review/reference/physics | | `058-064` | U blocking, UR warning-only comparison boundary | Numerical Review/reference model | | `065-072` | reference immutability and displacement-only evidence boundary acknowledged | reference model | ### 20.1 Numerical Review revision traceability The first review findings map to this revision as follows. `NR-C01` maps to Sections 9.2-9.3, 16.2, and 17.1/17.3. The geometry measures are fixed while their thresholds still require calibration. `NR-C02` maps to Sections 12.2 and 17.4. The common `rho_d,I` coordinate and candidate conversions are fixed while the stable plateau remains open. `NR-C03` maps to Sections 12.3/12.5 and 17.1. Element/global DOF scaling is fixed while the numerical-rank threshold remains open. `NR-C04` maps to Sections 7.1-7.2, which fix the global 24-DOF weak form and transpose notation. `NR-C05` maps to Sections 15.1-15.5 and 17.6, which expose the physical-chart/global-map boundary and required map Hessian term. `NR-D01` maps to Sections 6.2 and 16.3, which fix the exact-zero case and `rho_M <= 1e-12`. `NR-D02` maps to Sections 12.5 and 17.1, which fix the approved normalized algebraic metrics. ## 21. Open issues and downstream handoff ### 21.1 Blocking Numerical Review decisions 1. Select the dimensionally compatible drilling reference-scale family. 2. Select the nodewise `rho_d,I` stable plateau, nominal value, scaled conditioning/rank acceptance, and physical-output contamination bound. 3. Define classification and warning behavior for `E_drill/E_phys`, including the zero/near-zero physical-energy case. 4. Approve `theta_smooth` after curved-mesh resolution sweeps; `20 degrees` is only the initial candidate. 5. Calibrate thresholds for the fixed `J/j_s/a_g/c_d/r_J/theta_w` geometry inventory using valid distortion/warp and collapsed negative sequences. 6. Jointly with Reference Model, approve the U mixed tolerance and nonblocking UR large-error warning threshold. The first review already approved `rho_M <= 1e-12`, the normalized algebraic checks, the MITC tying/component signs, constitutive law, quadrature, and recovery signs. This revision is ready for Numerical Review rerun but not for Implementation Planning until the six remaining evidence-backed decisions are closed. ### 21.2 I/O Definition handoff - Preserve source `S4`/`S4R` separately from internal `FESA-MITC4`. - Define exact keyword subset, section/material resolution, and fail-closed diagnostics for director, folds, Jacobians, unsupported loads, and recovery; encode exact-zero nodal moment separately and enforce `rho_M <= 1e-12` without a denominator clamp. - Define exact HDF5 row schemas for global `U/UR`, `RF/RM`; four midsurface generalized-strain/resultant locations; bottom/middle/top stress positions; full residual/equilibrium; and separate energies. - Preserve local frame and natural-coordinate identity without location averaging. ### 21.3 Reference Model handoff - Use at least one S4 and one S4R source artifact, but compare formulation-independent global displacement evidence rather than claiming element equivalence. - Prioritize pinched cylinder and NAFEMS LE3 models compatible with nodal loads and approved BC semantics. - Propose the mixed U tolerance and nonblocking UR warning threshold. - Do not create, repair, rename, or run reference artifacts during this formulation gate. ### 21.4 Implementation Planning handoff - Do not begin until Numerical Review closes Section 21.1. - Translate the deterministic preprocessing, 24-to-20 transform, tying projection, physical/drill split, quadrature, recovery, and invariant portfolio into `RED -> GREEN -> VERIFY` tests before production changes. - Keep future nonlinear state and tangent out of the current linear-static plan. ### 21.5 Future nonlinear formulation handoff Before geometric-nonlinear implementation, separately approve the finite-director chart and update law, the complete `Phi: R24 -> R20` map and its first/second derivatives, objective drilling potential and scale update, exact first/second director derivatives, nonlinear constitutive boundary, nodal-moment work/load tangent, state ownership, convergence controls, and nonlinear output contract. Section 15 supplies the physical-chart residual/tangent and the conditional global mapping identity but deliberately does not close those product decisions.