FESADev/phases/linear-static-mitc4-shell/step12.md

Step 12: Shell Linear Static Flow

담당 역할과 필수 스킬

• 담당 역할: implementation-agent
• 필수 스킬: harness, fesa-cpp-msvc-tdd

읽어야 할 파일

• /.agents/skills/harness/SKILL.md, /.codex/skills/fesa-cpp-msvc-tdd/SKILL.md
• /AGENTS.md, /docs/PRD.md, /docs/ARCHITECTURE.md, /docs/ADR.md
• /docs/HARNESS.md, /docs/HARNESS_WORKFLOW.md, /.codex/hooks.json
• /docs/linear-static-mitc4-shell/implementation-plan.md
• /docs/linear-static-mitc4-shell/requirements.md Requirements 024-030/051/057
• /docs/linear-static-mitc4-shell/research.md
• /docs/linear-static-mitc4-shell/formulation.md
• /docs/linear-static-mitc4-shell/numerical-review.md
• /docs/linear-static-mitc4-shell/io.md CLI/diagnostic contract
• /docs/linear-static-mitc4-shell/reference-model.md
• phase indexes, step12.md, completed Steps 7-11 paths and summaries
• /include/fesa/analysis/linear_static_analysis.hpp
• /src/fesa/analysis/linear_static_analysis.cpp
• /tests/integration/analysis/linear_static_analysis_test.cpp
• /tests/integration/app/fesa_application_test.cpp
• /include/fesa/app/fesa_application.hpp와 implementation은 dispatch 확인용

작업

1. MITC4-FLOW-001..004 integration tests를 먼저 작성한다.
2. Shell Domain을 existing eight-hook Analysis::run() lifecycle에 연결한다.
3. Stiffness assemble/partition, Kff factorize, load/effective RHS, substitute, full displacement reconstruct, full residual/physical recovery, validated state/output commit 순서를 유지하고 factorization은 exactly once다.
4. Nonzero prescribed displacement의 Ff-Kfc*dc, singular support failure, all-constrained 0x0 Kff success를 검증한다.
5. CLI syntax와 exit 0/2/3/4/5/6 semantics를 유지하며 shell input도 같은 fesa.exe <model.inp> --output <results.h5> route를 사용한다.

Acceptance Criteria

$requiredBuildPaths=@("C:/git/googletest","C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl","C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb","C:/Program Files/HDF_Group/HDF5/2.1.1/cmake")
foreach($p in $requiredBuildPaths){if(-not(Test-Path -LiteralPath $p)){throw "Missing $p"}}
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
  "-DFESA_GTEST_SOURCE_DIR=C:/git/googletest" `
  "-DMKL_DIR=C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl" `
  "-DTBB_DIR=C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb" `
  "-DHDF5_DIR=C:/Program Files/HDF_Group/HDF5/2.1.1/cmake"
cmake --build .harness/build --config Debug --target fesa_integration_tests
ctest --test-dir .harness/build -C Debug -R "LinearStaticCli|Mitc4ShellCli" --output-on-failure

Shell pipeline RED를 확인하고 minimal GREEN. 이후:

cmake --build .harness/build --config Debug --target fesa_integration_tests
ctest --test-dir .harness/build -C Debug -R "LinearStaticCli|Mitc4ShellCli" --output-on-failure
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure

검증 및 상태 갱신

RED/lifecycle/focused/full evidence를 기록하고 current Step 상태 payload만 갱신한다.

금지사항

• Analysis lifecycle을 재정렬하거나 0x0 Kff를 singular로 바꾸지 마라.
• Nonlinear procedure, distributed load, mixed beam-shell execution을 추가하지 마라.
• Candidate validation 전 state/output을 commit하지 마라.
• 직접 commit/hook 실행 또는 reference/upstream 변경을 하지 마라.