FESADev/phases/linear-static-mitc4-shell/step2.md

Step 2: Shell Director Geometry

담당 역할과 필수 스킬

• 담당 역할: implementation-agent
• 필수 스킬: harness, fesa-cpp-msvc-tdd

읽어야 할 파일

• /.agents/skills/harness/SKILL.md, /.codex/skills/fesa-cpp-msvc-tdd/SKILL.md
• /AGENTS.md, /docs/PRD.md, /docs/ARCHITECTURE.md, /docs/ADR.md
• /docs/HARNESS.md, /docs/HARNESS_WORKFLOW.md, /.codex/hooks.json
• /docs/linear-static-mitc4-shell/implementation-plan.md
• /docs/linear-static-mitc4-shell/requirements.md Requirements 011-016/050/051/054
• /docs/linear-static-mitc4-shell/research.md
• /docs/linear-static-mitc4-shell/formulation.md Sections 4, 9, 17
• /docs/linear-static-mitc4-shell/numerical-review.md Sections 5.2, 5.5, 6.1
• /docs/linear-static-mitc4-shell/io.md Sections 3.3, 8-9
• /docs/linear-static-mitc4-shell/reference-model.md
• phase indexes, step2.md, Step 0-1 modified paths/summaries
• Candidate new /include/fesa/model/shell_geometry.hpp
• Candidate new /src/fesa/model/shell_geometry.cpp
• Candidate new /tests/unit/model/shell_geometry_test.cpp
• /src/fesa/CMakeLists.txt, /tests/CMakeLists.txt

작업

1. MITC4-GEO-001..004를 먼저 작성하고 CMake에 test source를 등록한다.
2. Backend-neutral model geometry module에 element normal candidate, deterministic area-weighted nodal director, pairwise positive orientation, right-handed nodal tangent frame with documented axis tie-break, structured validation seam을 만든다.
3. Center, eight stiffness points, four tying points, four committed recovery points에서 finite bases, nonzero surface measure, positive finite Jacobian을 검사한다.
4. Valid planar/rotated/warped cases와 duplicate, bow-tie, zero-area, reversed, nonfinite, nonpositive-J, opposed-normal cases를 검증한다.

Acceptance Criteria

$requiredBuildPaths=@("C:/git/googletest","C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl","C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb","C:/Program Files/HDF_Group/HDF5/2.1.1/cmake")
foreach($p in $requiredBuildPaths){if(-not(Test-Path -LiteralPath $p)){throw "Missing $p"}}
cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
  "-DFESA_GTEST_SOURCE_DIR=C:/git/googletest" `
  "-DMKL_DIR=C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl" `
  "-DTBB_DIR=C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb" `
  "-DHDF5_DIR=C:/Program Files/HDF_Group/HDF5/2.1.1/cmake"
cmake --build .harness/build --config Debug --target fesa_unit_tests
ctest --test-dir .harness/build -C Debug -R "Mitc4Geometry" --output-on-failure

Expected missing geometry API/behavior RED를 확인한 뒤 minimal GREEN. 이후:

cmake --build .harness/build --config Debug --target fesa_unit_tests
ctest --test-dir .harness/build -C Debug -R "Mitc4Geometry|DomainModel|InpDomainMapping" --output-on-failure
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure

검증 및 상태 갱신

RED/VERIFY evidence를 summary에 남기고 현재 Step 상태만 갱신한다. Executor-owned timestamp/retry/commit/advancement를 쓰지 않는다.

금지사항

• Calibrated smooth angle, warp/distortion threshold, NR-O03/NR-O04를 추가하지 마라.
• Parser keyword policy나 element stiffness를 구현하지 마라.
• Invalid geometry를 clamp/repair하지 마라.
• Reference/upstream 문서를 수정하거나 직접 commit/hook 실행을 하지 마라.