Step 7: verify-and-report-pressure-feature

실행 범위와 상태 소유권

This final Implementation-owned Step inspects all prior artifacts, performs fresh MSVC/CTest and exact pressure-reference gates, and completes the three Gate 6 evidence documents. Code changes are not the default scope. The required sequence is literally ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT after build/test gates.

Implementation Agent may update only Step 7's status and one-line summary/error_message/blocked_reason. Executor owns branch, retry, timestamps, commits, advancement, top-level phase completion and output JSON. This Step does not approve physics Gate 7 or release readiness.

읽어야 할 파일

AGENTS.md
docs/PRD.md
docs/ARCHITECTURE.md
docs/ADR.md
docs/CODINGSTYLE.md
docs/HARNESS.md
docs/HARNESS_WORKFLOW.md
.codex/hooks.json
.harness/config.json if it exists at execution time
CMakeLists.txt, src/fesa/CMakeLists.txt, tests/CMakeLists.txt
Every docs/shell-surface-pressure-load/*.md upstream and approved plan
phases/shell-surface-pressure-load/index.json
All production/test files created or modified in Steps 1–6
tests/reference/shell_surface_pressure_reference_test.cpp
tests/reference/nonlinear_static_reference_comparison.h/.cpp
Exact read-only artifacts listed in Step 6 and reference-model.md

Read all prior Step summaries and changed files. Verify that every production change has a first-failing test record and that source/interface names remain consistent with the approved plan.

소유 파일

Create/complete: docs/shell-surface-pressure-load/implementation-report.md
Create/complete: docs/shell-surface-pressure-load/build-test.md
Create/complete: docs/shell-surface-pressure-load/reference-comparison.md

Production, tests, CMake and phase files are read-only in this Step except Step 7's selected status/payload. If verification exposes an implementation defect, classify and return it to Coordinator/the owning earlier Step; do not silently repair it here.

RED evidence preflight

First prove the three reports are absent/incomplete or contain no fresh final passing evidence. This expected evidence-state failure is Step 7 RED. Then inspect prior reports/summaries for recorded test-first RED commands and expected failures. If any source/test/CMake change lacks RED evidence, classify evidence-gap and stop; do not fabricate history.

Record the preflight result before running final gates.

Fresh MSVC x64 Debug gates

If .harness/config.json exists, it takes precedence and the reports must record its exact resolved configure/build/test commands. Otherwise run exactly:

cmake --fresh -S . -B .harness/build -G "Visual Studio 18 2026" -A x64 `
  "-DFESA_GTEST_SOURCE_DIR=C:/git/googletest" `
  "-DMKL_DIR=C:/Program Files (x86)/Intel/oneAPI/mkl/2026.1/lib/cmake/mkl" `
  "-DTBB_DIR=C:/Program Files (x86)/Intel/oneAPI/tbb/2023.1/lib/cmake/tbb" `
  "-DHDF5_DIR=C:/Program Files/HDF_Group/HDF5/2.1.1/cmake"
cmake --build .harness/build --config Debug
ctest --test-dir .harness/build -C Debug --show-only=json-v1
ctest --test-dir .harness/build -C Debug --output-on-failure -R "^(InpSyntax|ShellSurfacePressureInput|ShellSurfacePressureDomain|ShellSurfacePressureKernel|SurfacePressureAssembly|LinearShellSurfacePressure|NonlinearShellSurfacePressure|ShellSurfacePressureApplication|ShellSurfacePressureReference)\."
ctest --test-dir .harness/build -C Debug --output-on-failure
ctest --test-dir .harness/build -C Debug --output-on-failure -R "^ShellSurfacePressureReference\."

Acceptance requires every exit 0, nonzero discovered tests including every named feature suite, full CTest pass, no new /W4 /WX warning, correct MSVC/x64/Debug selection and successful MKL/TBB/HDF5 runtime staging. No Harness/Python files are in scope, so do not run Python tests unless separately authorized Harness/Python changes actually occurred; then record uv run --with pytest python -m pytest -v -rs and why.

ARTIFACT CHECK -> COMPARE -> CLASSIFY -> REPORT

ARTIFACT CHECK

Before running the pressure case, record path, SHA-256, bytes and timestamp for:

required input reference/shellNL-meshfine-pressure/shellNL-meshfine-pressure.inp: 56,665 bytes, 53718ccc9b41c23fcc1b509a51d66f1347e87aca43a74f1d6cec4d2085f4b90e;
required displacement CSV: 111,182 bytes, 2fe53f98eac9f04779100721c3edf8049eb1dbfe733ebcbd819aeeed03b81198;
reaction CSV as review-only inventory;
stress CSV as excluded inventory.

Confirm source history/commands do not invoke Abaqus. Copy only the exact input to .harness/build/reference/shell-surface-pressure-load/.

COMPARE

Run FESA only on the copied input and locate generated schema-1 <stem>_results.h5 and log. Use ShellSurfacePressureReference comparison to select exact Step-1 unique factor-one accepted frame and project /model/nodes plus nodal displacements by (Part-1-1, source node label, component). Require 729 wide CSV rows, 2,187 U logical rows and 2,187 UR logical rows. Reject missing/extra/duplicate/nonfinite/schema/frame/identity errors before unchanged common tolerance.

CLASSIFY

Blocking fail: any precheck, U1/U2/U3 tolerance, required internal free-residual/global-equilibrium or artifact immutability failure.
Warning-only: UR1/UR2/UR3 deviations when all blocking gates pass.
Review-only/excluded: reaction/stress cannot change the verdict.
Classify failures as implementation | test | configure | compile | link | reference-comparison | infrastructure | environment | artifact | regression | evidence-gap | upstream-contract.

Any nonzero command, zero tests, new warning, runtime staging failure, artifact mutation, cardinality mismatch or U/internal blocking failure leaves Step non-completed. Retain evidence and return to Coordinator; do not adjust tolerance or artifacts.

REPORT

Write complete Korean Markdown reports:

implementation-report.md: metadata, task order, RED/GREEN/VERIFY evidence per Step, exact changed files/interfaces, 24-requirement coverage, implementation acceptance, limitations and handoff.
build-test.md: owner_agent: implementation-agent, environment/toolchain/config selection, each command, exit, duration, stdout/stderr tail, test discovery/count/results, warning/runtime inventory, failure classification, no-change assertion and open issues.
reference-comparison.md: exact artifact inventory and pre/post snapshots, generated HDF5/log, schema/frame projection, source identity/component matching, row prechecks, unchanged tolerance, per-family/per-row decisions, maximum absolute/relative applicable error, RMS and other contract-applicable metrics, U/UR disposition, internal gates, deterministic classification, no-change assertion and open issues.

Do not claim release readiness. A passing Gate 6 report recommends only pass-for-physics-evaluation through Coordinator.

Final Acceptance Criteria

All 24 FESA-REQ-SHELL-PRESSURE-001–024 map to at least one implemented task and passing test/evidence; orphan count zero.
Fresh MSVC x64 Debug build, focused suite, nonzero discovery and full CTest pass with zero new warnings.
Exact artifacts remain byte-for-byte unchanged after FESA-only run.
Schema 0/1 contracts and no-pressure regressions pass; no pressure dataset/schema/version/CLI expansion.
Pressure reference U blocking passes, UR remains warning-only, reaction review-only, stress excluded; internal equilibrium passes.
Reports contain commands, exits, durations, tails and classification; no fabricated RED evidence.
Automatic Stop whole-project validation succeeds. Do not run hook entry points manually.

금지사항

Do not fix source/tests/CMake silently, generate reference data, run Abaqus, alter tolerance, upstream docs or artifact bytes.
Do not approve physics/release gates, create Executor output JSON, invoke scripts/execute.py, update timestamps, commit or push.
Do not select another Step. 이유: this is the final Executor-selected implementation evidence Step only.

8.0 KiB Raw Blame History Unescape Escape