AbaqusSubroutineDev/docs/AbaqusUserSubroutineManual/AbaqusUserSubroutineManual_060.md

const double* xc, const double* yc, const double* zc, double amp, double totalTime, double stepTime, const char* surfaceName, double* bcvals)
{
    int i;
    if (direction == 2) {
    for (i = 0; i < nfacets; i++) {
    bcvals[i] = 1.0 - xc[i] * xc[i] / 100.0;
    }
    }
} 

2. Utility Routines

• “Utility routines,” Section 2.1

2.1 Utility routines

• “Obtaining Abaqus environment variables,” Section 2.1.1
• “Obtaining the Abaqus job name,” Section 2.1.2
• “Obtaining the Abaqus output directory name,” Section 2.1.3
• “Obtaining parallel processes information,” Section 2.1.4
• “Obtaining part information,” Section 2.1.5
• “Obtaining material point information in an Abaqus/Standard analysis,” Section 2.1.6
• “Obtaining material point information in an Abaqus/Explicit analysis,” Section 2.1.7
• “Obtaining material point information averaged at a node,” Section 2.1.8
• “Obtaining node point information,” Section 2.1.9
• “Obtaining node to element connectivity,” Section 2.1.10
• “Obtaining stress invariants, principal stress/strain values and directions, and rotating tensors in an Abaqus/Standard analysis,” Section 2.1.11
• “Obtaining principal stress/strain values and directions in an Abaqus/Explicit analysis,” Section 2.1.12
• “Obtaining wave kinematic data in an Abaqus/Aqua analysis,” Section 2.1.13
• “Printing messages to the message or status file,” Section 2.1.14
• “Terminating an analysis,” Section 2.1.15
• “Obtaining sensor information,” Section 2.1.16
• “Accessing Abaqus materials,” Section 2.1.17
• “Accessing Abaqus thermal materials,” Section 2.1.18
• “Obtaining scalar state information in an Abaqus/CFD analysis,” Section 2.1.19
• “Obtaining vector state information in an Abaqus/CFD analysis,” Section 2.1.20
• “Obtaining the MPI communicator in an Abaqus/CFD analysis,” Section 2.1.21
• “Ensuring thread safety,” Section 2.1.22
• “Allocatable arrays,” Section 2.1.23

2.1.1 OBTAINING Abaqus ENVIRONMENT VARIABLES

Products: Abaqus/Standard Abaqus/Explicit

References

• “User subroutines: overview,” Section 18.1.1 of the Abaqus Analysis User’s Guide
• “Using the Abaqus environment settings,” Section 3.3.1 of the Abaqus Analysis User’s Guide
• “UWAVE and UEXTERNALDB,” Section 4.1.27 of the Abaqus Verification Guide

Overview

Utility routines GETENVVAR and VGETENVVAR can be called from any Abaqus/Standard or Abaqus/Explicit user subroutine, respectively, to obtain the value of an environment variable.

Interface

character*256 ENVVAR
...
CALL GETENVVAR('ENVVARNAME', ENVVAR, LENVVAR)
CALL VGETENVVAR('ENVVARNAME', ENVVAR, LENVVAR)
... 

Variable to be provided to the utility routine

ENVVARNAME

Environment variable name.

Variables returned from the utility routine

ENVVAR

Character string to receive the value of the environment variable.

LENVVAR

Length of the character string ENVVAR.

2.1.2 OBTAINING THE Abaqus JOB NAME

Products: Abaqus/Standard Abaqus/Explicit

References

• “User subroutines: overview,” Section 18.1.1 of the Abaqus Analysis User’s Guide
• “UWAVE and UEXTERNALDB,” Section 4.1.27 of the Abaqus Verification Guide

Overview

Utility routines GETJOBNAME and VGETJOBNAME can be called from any Abaqus/Standard or Abaqus/Explicit user subroutine, respectively, to obtain the name of the current job.

Interface

character*256 JOBNAME
...
CALL GETJOBNAME( JOBNAME, LENJOBNAME )
CALL VGETJOBNAME( JOBNAME, LENJOBNAME )
... 

Variables returned from the utility routine

JOBNAME

Character string to receive the value of the job name.

LENJOBNAME

Length of the character string JOBNAME.