FESADev/docs/shell-surface-pressure-load/coordination.md

Shell Surface Pressure Load Coordination Record

1. Metadata and Feature Scope

• feature_id: shell-surface-pressure-load
• workflow_state: needs-release
• owner_agent: coordinator-agent
• request_date: 2026-08-30
• last_updated: 2026-09-01
• process_classification: architectural
• current_goal: Gates 1–7의 passing evidence와 acceptance traceability를 독립 감사해 release readiness를 판정한다.
• approved_scope: Abaqus subset *SURFACE, TYPE=ELEMENT와 *DSLOAD의 uniform P를 S4/S4R SPOS|SNEG surface에 적용한다. Linear static은 reference configuration load를, nonlinear static은 current-configuration follower load와 external tangent를 사용한다.
• scope_boundaries: Unsupported surface/load variants는 fail-closed로 거부하고 stable source identity와 deterministic load/reduction order를 보존한다. 기존 authoritative HDF5 output을 우선 유지하되 Stage 5 I/O gate가 evidence로 최종 확정한다.
• reference_case: reference/shellNL-meshfine-pressure/의 existing .inp와 CSV를 exact path/name 그대로 read-only 사용한다.
• user_approval: 2026-08-30 approved Abaqus-aligned design; 2026-09-01 approved the 7-Step implementation plan, phase materialization, Harness execution without push, and isolated recovery worktree with per-run FESA_HARNESS_CODEX_SANDBOX=danger-full-access fallback.
• active_workspace: C:/git/FESADev/.worktrees/shell-surface-pressure-load-recovery on feat-shell-surface-pressure-load; recovery baseline commit 2d07106
• protected_backup_workspace: original C:/git/FESADev dirty feature workspace; do not read, modify, clean, stash, commit, reset, or execute there during recovery

2. Eight-Stage Worklist

stage	owner	status	output paths	acceptance gate	evidence summary	blockers	attempt count
1. Requirements	requirement-agent	passed	docs/shell-surface-pressure-load/requirements.md	지원/제외 범위, verifiable acceptance criteria, verification quantities, tolerance baseline과 requirement verification matrix가 승인 설계를 손실 없이 고정함	FESA-REQ-SHELL-PRESSURE-001–024; normative 24/matrix 24; orphan 0; exact reference input/displacement paths와 blocking/warning/excluded disposition; owner passed; Coordinator audit 통과	없음	1
2. Research	research-agent	passed	docs/shell-surface-pressure-load/research.md	이론, benchmark, primary evidence와 applicability limit가 충분함	Source 15개(Project/Stored 3, Tier 1 official 8, Tier 2 3, Tier 3 navigation 1), key claims 15개, benchmark 8개, normative trace gap 0; owner passed; Coordinator audit 통과	없음	1
3. Formulation	formulation-agent	passed	docs/shell-surface-pressure-load/formulation.md	Pressure virtual work, equivalent nodal load, follower linearization과 numerical integration 계약이 구현 가능함	ready-for-numerical-review; force/residual/tangent sign, common 2x2 rule, 24x1/24x24 dimensions, dimensionless geometry contract, deterministic assembly, requirement trace 24/24; owner passed; Coordinator audit 통과	없음	1
4. Numerical/reference review	numerical-review-agent	passed	docs/shell-surface-pressure-load/numerical-review.md; docs/shell-surface-pressure-load/reference-model.md	Numerical review와 exact reference contract가 함께 pass-for-io-definition임	Aligned pass-for-io-definition; tau_J=1e-12, analytical/objectivity 1e-12, FD h=1e-5/error 1e-8, global balance 1e-8; exact 729-row reference inventory, U/UR 2,187 logical rows each; owner evidence와 Coordinator audit 통과	없음	1
5. I/O definition	io-definition-agent	passed	docs/shell-surface-pressure-load/io.md	Abaqus subset, semantic mapping, diagnostics, HDF5 projection과 reference rows가 명확함	ready-for-implementation-planning; exact assembly SURFACE/step DSLOAD P, Domain/Step/AnalysisModel mapping, ordered fail-closed validation, unchanged schema 0/1, exact HDF5/reference projection, trace 24/24; owner passed; Coordinator audit 통과	없음	1
6. Implementation	implementation-planning-agent; implementation-agent	passed	docs/shell-surface-pressure-load/implementation-plan.md; docs/shell-surface-pressure-load/implementation-report.md; docs/shell-surface-pressure-load/build-test.md; docs/shell-surface-pressure-load/reference-comparison.md; docs/shell-surface-pressure-load/corrections.md	승인 계획, TDD evidence, MSVC/x64/Debug build/CTest와 blocking reference comparison이 모두 통과함	Harness Steps 1–7 completed; focused 64/64, pressure reference 9/9, final automatic Stop build PASS/full 362/362 PASS, 0 failed; requirements trace 24/24; post-hook reports는 historical evidence와 pass-for-physics-evaluation을 기록함	없음	2
7. Physics evaluation	physics-evaluation-agent	passed	docs/shell-surface-pressure-load/physics-evaluation.md	Direction, symmetry, resultant, reaction과 equilibrium 검토가 pass-for-release-agent임	Owner pass-for-release-agent; documented pressure direction/sign, current-area resultant/moment, reactions/equilibrium, symmetry/zero behavior, follower objectivity, residual/nonfinite sanity와 declared model coverage 통과; normalized force/moment balance 6.76e-14/3.72e-14 <= 1e-8; Coordinator output/status/no-change audit 통과	없음	1
8. Release readiness	release-agent	in-progress	docs/shell-surface-pressure-load/release.md	Acceptance traceability와 limitation을 포함한 verdict가 ready-for-release임	GATE8-REL-001 dispatch 준비	없음	1

3. Active Dispatch Package and Latest Sub-Agent Return

Completed Dispatch Package

• dispatch_id: GATE1-REQ-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: requirement-agent
• required_inputs:
  • AGENTS.md
  • docs/PRD.md
  • docs/ARCHITECTURE.md
  • docs/ADR.md
  • docs/TOLERANCE.md
  • docs/SOLVER_AGENT_DESIGN.md
  • approved design recorded in this file
  • reference/shellNL-meshfine-pressure/ read-only inventory
• expected_outputs: docs/shell-surface-pressure-load/requirements.md
• acceptance_gate: Verifiable shall requirements, explicit scope/exclusions, input/output semantics, failure behavior, deterministic identity/order, reference quantities/dispositions, common tolerance baseline and complete requirement verification matrix preserve the approved design without downstream formulation or I/O invention.
• stop_condition: requirements.md와 return evidence를 제출한 뒤 중지한다. Peer dispatch, Gate 2 work, source/tests/CMake/reference/tolerance 변경은 금지한다.
• missing_evidence: 없음

Completed Dispatch Package — Gate 2

• dispatch_id: GATE2-RES-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: research-agent
• required_inputs:
  • AGENTS.md
  • docs/SOLVER_AGENT_DESIGN.md
  • docs/shell-surface-pressure-load/requirements.md binding baseline
  • docs/PRD.md, docs/ARCHITECTURE.md, docs/ADR.md, docs/TOLERANCE.md
  • exact read-only inventory under reference/shellNL-meshfine-pressure/
  • fesa-research-evidence; 필요 시 fem-theory-query
• expected_outputs: docs/shell-surface-pressure-load/research.md
• acceptance_gate: Key claims마다 source/reliability tier 또는 inference label이 있고, Abaqus observable input/load semantics와 FESA-owned theory가 분리된다. Pressure virtual work, current-surface follower force, external tangent, S4/S4R applicability와 verification candidates가 target quantity, 한계, exact artifact와 requirement trace를 갖는다.
• stop_condition: research.md와 return evidence 제출 후 중지한다. Formulation 확정, peer dispatch, Gate 3, source/tests/CMake/reference/tolerance 변경은 금지한다.
• missing_evidence: 없음

Completed Dispatch Package — Gate 3

• dispatch_id: GATE3-FORM-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: formulation-agent
• required_inputs:
  • AGENTS.md
  • docs/SOLVER_AGENT_DESIGN.md
  • binding docs/shell-surface-pressure-load/requirements.md
  • approved docs/shell-surface-pressure-load/research.md
  • applicable project architecture/ADR contracts
  • fesa-formulation-spec; 필요 시 supporting fem-theory-query
• expected_outputs: docs/shell-surface-pressure-load/formulation.md
• acceptance_gate: Strong/weak form, S4/S4R interpolation, side/sign map, reference/current geometry, quadrature/Jacobian validity, consistent pressure force, residual sign, exact external tangent, full-space deterministic assembly, units/failures, verification identities와 requirement trace가 implementation-ready이며 Abaqus internal equivalence를 주장하지 않음.
• stop_condition: formulation.md와 return evidence 제출 후 중지한다. Parser/API/source/test/reference 변경, peer dispatch, Numerical Review/Gate 4 수행은 금지한다.
• missing_evidence: 없음

Completed Dispatch Package — Gate 4

• dispatch_id: GATE4-NR-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: numerical-review-agent
• required_inputs:
  • AGENTS.md, docs/SOLVER_AGENT_DESIGN.md
  • binding requirements.md, approved research.md, formulation.md
  • docs/TOLERANCE.md와 applicable architecture/ADR contracts
  • exact read-only reference/shellNL-meshfine-pressure/ artifacts
  • fesa-numerical-review
• expected_outputs: docs/shell-surface-pressure-load/numerical-review.md; docs/shell-surface-pressure-load/reference-model.md
• acceptance_gate: 독립 sign/force/tangent/residual/integration/geometry/objectivity/equilibrium/determinism review가 blocking flaw 없이 통과하고, tau_J와 internal test thresholds가 scale-aware하게 확정된다. Exact input/required CSV identity, component/blocking classification, row prechecks와 unchanged docs/TOLERANCE.md policy가 I/O 정의에 충분해야 한다.
• stop_condition: 두 report와 owner verdict/return evidence 제출 후 중지한다. Upstream flaw는 문서를 조용히 수정하지 않고 precise rework로 반환한다. Source/tests/CMake/reference/tolerance 변경, peer dispatch, Gate 5 수행은 금지한다.
• missing_evidence: 없음

Completed Dispatch Package — Gate 5

• dispatch_id: GATE5-IO-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: io-definition-agent
• required_inputs:
  • AGENTS.md, docs/SOLVER_AGENT_DESIGN.md
  • approved feature requirements.md, research.md, formulation.md, numerical-review.md, reference-model.md
  • applicable PRD/architecture/ADR/CODINGSTYLE/TOLERANCE contracts
  • exact read-only reference/shellNL-meshfine-pressure/ artifacts
  • fesa-io-contract
• expected_outputs: docs/shell-surface-pressure-load/io.md
• acceptance_gate: Approved *SURFACE TYPE=ELEMENT/*DSLOAD P grammar, model/history mapping, deterministic target resolution/diagnostics, Domain/Step/AnalysisModel semantic ownership, existing authoritative HDF5 field projection, exact reference CSV identity/prechecks/common tolerance와 compatibility boundary가 구현 계획에 충분하고 upstream contract와 일치함.
• stop_condition: io.md와 owner return evidence 제출 후 중지한다. Parser/API implementation, source/tests/CMake/phases/reference/tolerance 변경, peer dispatch와 Gate 6 수행은 금지한다.
• missing_evidence: 없음

Completed Dispatch Package — Gate 6 Planning

• dispatch_id: GATE6-PLAN-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: implementation-planning-agent
• required_inputs:
  • AGENTS.md, docs/SOLVER_AGENT_DESIGN.md, docs/HARNESS.md, docs/HARNESS_WORKFLOW.md
  • approved feature requirements.md, research.md, formulation.md, numerical-review.md, reference-model.md, io.md
  • current source/tests/CMake/.harness/config.json/hooks/phase inventory read-only
  • fesa-cpp-msvc-tdd, project-local harness, compatible superpowers:writing-plans
• expected_outputs: docs/shell-surface-pressure-load/implementation-plan.md; concise user-approval Step draft in owner return
• acceptance_gate: Multiple self-contained Steps가 각자 RED -> observed failure -> minimal GREEN -> focused/full VERIFY를 포함하고 exact files/signatures/tests/commands/dependencies/traceability를 지정한다. Parser/model, force/tangent, linear/nonlinear assembly, deterministic failure, HDF5/reference comparison와 final MSVC x64 Debug CTest evidence를 모두 다루며 reference immutability/atomicity를 보존한다.
• stop_condition: Plan draft와 return evidence 제출 후 사용자 승인을 기다린다. phases/index.json, phases/<task>/, source/tests/CMake/reference 수정, Harness execution, Implementation Agent dispatch는 승인 전 금지한다.
• missing_evidence: 사용자 plan approval

Completed Dispatch Package — Gate 6 Phase Materialization

• dispatch_id: GATE6-PHASE-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: implementation-planning-agent (GATE6-PLAN-001과 동일 owner instance)
• required_inputs:
  • approved docs/shell-surface-pressure-load/implementation-plan.md
  • AGENTS.md, docs/HARNESS.md, docs/HARNESS_WORKFLOW.md, project-local harness
  • existing phases/index.json과 existing task directories
• expected_outputs: phases/index.json; phases/shell-surface-pressure-load/index.json; phases/shell-surface-pressure-load/step1.md–step7.md
• acceptance_gate: Top-level task entry와 task index의 7 pending Steps가 승인 slug/order와 정확히 일치한다. 각 Step은 독립 실행에 필요한 upstream docs, exact files/signatures, RED expected failure, minimal GREEN, focused/full MSVC x64 Debug CMake/CTest commands, dependencies, status ownership, forbidden scope와 reference immutability를 대화 참조 없이 포함한다.
• stop_condition: Planning files만 materialize하고 실행·Step selection·status advancement·timestamp·commit·push를 하지 않는다. Source/tests/CMake/docs/reference/tolerance는 변경하지 않는다.
• missing_evidence: 없음

Paused Dispatch — Gate 6 Implementation Recovery

• dispatch_id: GATE6-IMPL-RECOVERY-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: implementation-agent
• required_inputs:
  • AGENTS.md, .codex/hooks.json, .agents/skills/harness/SKILL.md, docs/HARNESS.md, docs/HARNESS_WORKFLOW.md
  • approved feature bundle requirements.md, research.md, formulation.md, numerical-review.md, reference-model.md, io.md, implementation-plan.md
  • materialized phases/index.json, phases/shell-surface-pressure-load/index.json, step1.md–step7.md
  • fesa-cpp-msvc-tdd; user authorization for python scripts/execute.py shell-surface-pressure-load without --push
  • clean recovery worktree C:/git/FESADev/.worktrees/shell-surface-pressure-load-recovery, baseline 2d07106, branch feat-shell-surface-pressure-load-recovery
  • per-process-only FESA_HARNESS_CODEX_SANDBOX=danger-full-access; remove environment variable immediately after Executor returns
  • root baseline evidence: approved dependency paths, MSVC x64 Debug configure/build pass, nonzero discovery, full CTest 302/302 PASS
• expected_outputs: completed phase Step records; feature production/tests/CMake/comparator changes; docs/shell-surface-pressure-load/implementation-report.md; build-test.md; reference-comparison.md; actual RED/GREEN/VERIFY logs and unchanged reference hashes
• acceptance_gate: Step 1–7 executes in order with expected RED before each production behavior, minimal GREEN, focused and full MSVC x64 Debug build/CTest. Final comparison uses exact stored artifacts, deterministic identity/prechecks/common tolerance and records U blocking/UR warning-only while preserving hashes. All Gate 6 reports must support pass-for-physics-evaluation with no unresolved blocking failure.
• stop_condition: Execute only in the recovery worktree. Do not touch the original backup workspace, push, run Abaqus/reference solvers, change upstream contracts/tolerance/reference artifacts, advance Gate 7, or revert other agents' docs/coordination changes. Scope danger-full-access only to the single Executor process and remove it afterward. Repeated/unclear implementation failure returns to Coordinator for bounded correction routing.
• missing_evidence: completed Steps 1–7, three Gate 6 reports, owner return, Coordinator evidence audit

Completed Dispatch — Gate 6 Correction

• dispatch_id: GATE6-CORR-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: correction-agent
• required_inputs:
  • Step 1/2 commits ca3e4bc, d5fc316, c3b671d, adebfae and ignored step1-output.json, step2-output.json
  • observed process evidence: Step 2 agent full CTest PID 21572 at 12:44:03; Stop hook PIDs 21496/20712 at 12:45:41; Stop full CTest PID 8816 at 12:46:01; final test PID 21964; parallel overlap while Harness waited for pipe EOF
  • approved implementation-plan.md, step3.md–step7.md, fesa-cpp-msvc-tdd, project Harness and Stop-hook ownership contracts
  • current phase index with stale pending Step 3 started_at=2026-09-01T13:11:27+0900
• expected_outputs: docs/shell-surface-pressure-load/corrections.md; minimally corrected phases/shell-surface-pressure-load/step3.md–step7.md; normalized Step 3 pending index entry if required
• acceptance_gate: Root cause/evidence, Step 1/2 RED/focused/full evidence and timeout classification are auditable. Pending Steps require agent-owned RED+focused verification only and preserve Stop hook as the single whole-project full verification owner. Acceptance/tolerance/reference strength and final Gate 6 report evidence remain unchanged; diff has no code/test/reference/upstream-contract edits.
• stop_condition: Do not commit, execute Harness/build/test, modify Step 1/2, source/tests/CMake/reference/tolerance/upstream docs, advance phase/Gate 7, or revert other agents' changes. Return exact rerun/commit recommendation to Coordinator.
• missing_evidence: 없음

Completed Dispatch — Gate 6 Post-Hook Evidence Amendment

• dispatch_id: GATE6-EVIDENCE-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: same implementation-agent
• required_inputs: completed phase index/commits, Step 7 output, .harness/build/Testing/Temporary/LastTest.log, authoritative final automatic Stop full CTest 362/362 PASS, 0 failed
• expected_outputs: amended docs/shell-surface-pressure-load/build-test.md; implementation-report.md only if needed for consistency
• acceptance_gate: Exact Stop configure/build/discovery/full-test command/result, exit status, 362/362, zero failures, duration/tail and single-owner classification are historical fact rather than future tense; no source/test/CMake/reference/phase changes and no test rerun.
• stop_condition: Evidence-only docs amendment; do not run build/CTest/Harness, change implementation/reference/upstream contracts, commit/push, dispatch peers, or advance Gate 7.
• missing_evidence: 없음

Completed Dispatch — Gate 7 Physics Evaluation

• dispatch_id: GATE7-PHYS-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: physics-evaluation-agent
• required_inputs: approved feature bundle requirements.md, research.md, formulation.md, numerical-review.md, reference-model.md, io.md; passing implementation-report.md, build-test.md, reference-comparison.md; exact read-only reference artifacts; fesa-physics-sanity
• expected_outputs: docs/shell-surface-pressure-load/physics-evaluation.md
• acceptance_gate: Passing reference rows와 implementation evidence를 바탕으로 pressure 방향/부호, resultant와 moment, reactions/equilibrium, symmetry/zero behavior, nonlinear follower objectivity/current-area behavior, nonfinite/residual sanity와 stored-case model coverage를 독립 평가하고 verdict가 pass-for-release-agent임.
• stop_condition: Physics report와 owner return evidence 제출 후 중지한다. Source/tests/CMake/reference/tolerance/upstream contracts를 수정하거나 Abaqus를 실행하거나 Gate 8을 수행하지 않는다.
• missing_evidence: 없음

Active Dispatch — Gate 8 Release Readiness

• dispatch_id: GATE8-REL-001
• feature_id: shell-surface-pressure-load
• target_sub_agent: release-agent
• required_inputs: Gates 1–7 approved feature bundle과 owner reports: requirements.md, research.md, formulation.md, numerical-review.md, reference-model.md, io.md, implementation-plan.md, implementation-report.md, build-test.md, reference-comparison.md, corrections.md, physics-evaluation.md; fesa-release-readiness
• expected_outputs: docs/shell-surface-pressure-load/release.md
• acceptance_gate: Required reports가 같은 feature/status로 일치하고 full 362/362 validation, pass-for-physics-evaluation, pass-for-release-agent가 확인되며 각 must requirement가 acceptance/test/reference/release scope와 추적되고 known limitations 및 release notes draft를 포함한 verdict가 ready-for-release임.
• stop_condition: Release report와 owner return evidence 제출 후 중지한다. Source/tests/CMake/reference/tolerance/upstream contracts를 수정하거나 build/test/Harness/reference solver를 실행하거나 publish/deploy/package/tag/commit/push하지 않는다.
• missing_evidence: Release Agent report와 closure recommendation

Latest Sub-Agent Return

• target_sub_agent: physics-evaluation-agent
• output_paths: docs/shell-surface-pressure-load/physics-evaluation.md
• status: pass-for-release-agent
• evidence_summary: pass-for-physics-evaluation 선행 조건을 확인하고 documented pressure direction/sign, current-area resultant/moment, reactions/equilibrium, displacement direction, symmetry/zero behavior, follower objectivity, residual/nonfinite sanity와 declared model coverage를 통과로 판정함. Stored HDF5를 read-only 재검사한 normalized force/moment balance는 6.758e-14/3.725e-14 <= 1e-8이며 release readiness 자체는 승인하지 않음.
• blockers: 없음
• open_evidence_gaps: Gate 8 release readiness audit 대기
• critical_user_question: 없음
• forbidden_area_assertion: physics-evaluation.md만 생성; source, tests, CMake, phases, upstream contracts, generated evidence, docs/TOLERANCE.md, reference artifact 변경 없음

4. Gate Decision Log and Workflow State

date	dispatch	gate decision	owner evidence	workflow state
2026-08-30	GATE1-REQ-001	passed	Owner passed; requirements.md 24 normative IDs/24 matrix rows, complete traceability, approved design/reference boundary, blocker 없음. Coordinator 독립 구조 감사에서 orphan 0, matrix-only 0 및 필수 contract field 누락 0 확인	needs-research
2026-08-30	GATE2-RES-001	passed	Owner passed; source 15/key claims 15/benchmark 8/trace gap 0. Coordinator audit에서 undeclared cited source 0, Abaqus observable/FESA formulation 분리, limitation과 nonblocking gap 확인	needs-formulation
2026-08-30	GATE3-FORM-001	passed	Owner passed, document ready-for-numerical-review; Coordinator audit에서 required formulation sections 완비, requirement rows 24/24, upstream scope/sign/output 일치와 explicit Numerical Review handoff 확인	needs-numerical-review
2026-08-30	GATE4-NR-001	passed	Owner reports aligned pass-for-io-definition; Coordinator audit에서 두 verdict/required sections, quantitative gates, exact artifact/row/component classification, precheck/common tolerance/immutability와 no final HDF5 projection 확인	needs-io-definition
2026-08-31	GATE5-IO-001	passed	Owner passed, document ready-for-implementation-planning; Coordinator audit에서 required sections/grammar/ownership/validation/schema/reference projection 완비, trace 24/24, no new dataset/version와 no critical issue 확인	needs-implementation-plan
2026-08-31	GATE6-PLAN-001	passed	Owner passed, document draft-awaiting-user-approval; Coordinator audit에서 7 Steps, TDD/commands/dependencies/24-of-24 trace, no phase/code mutation 확인. Initial upstream-io-contract-mismatch는 same-owner follow-up으로 multi-explicit-instance 지원과 committed source identity를 교정함. 이는 planning subgate 판정이며 Stage 6 implementation gate는 미통과	needs-user-decision
2026-09-01	GATE6-PLAN-APPROVAL	passed	User explicitly approved the 7-Step draft, phase materialization, and implementation/verification execution; --push 금지	needs-implementation-plan
2026-09-01	GATE6-PHASE-001	pending	동일 Implementation Planning Agent의 phase materialization과 Coordinator audit 대기	needs-implementation-plan
2026-09-01	GATE6-PHASE-001	passed	Owner passed; Coordinator audit에서 existing top index preservation, exact 7 pending slugs/files, Executor-readable paths, self-contained RED/GREEN/VERIFY와 exact reference immutability 확인	ready-for-implementation
2026-09-01	GATE6-IMPL-001	pending	Exactly one Implementation Agent execution/evidence 대기	needs-implementation
2026-09-01	GATE6-IMPL-001	blocked	Original shared-workspace Step 1의 공식 CMake compiler identification이 MSBuild FileTracker 0x80070005로 차단됨. 첫 environment/sandbox-msvc-filetracker-access-denied; correction-agent 비대상. Dirty workspace를 backup으로 보존	needs-user-decision
2026-09-01	GATE6-RECOVERY-APPROVAL	passed	User approved isolated linked recovery worktree와 per-run danger-full-access; root created clean baseline 2d07106 and independently verified MSVC x64 Debug configure/build, nonzero discovery, full CTest 302/302 PASS	ready-for-implementation
2026-09-01	GATE6-IMPL-RECOVERY-001	pending	Same Implementation Agent controller recovery execution/evidence 대기	needs-implementation
2026-09-01	GATE6-IMPL-RECOVERY-001	needs-rework	Step 1/2 commits completed, but agent full CTest and Stop-hook full CTest overlapped in parallel and caused repeated 1800-second timeout/slowdown. Harness safe-stopped after Step 2 commits; Step 3 source edit 없음	needs-correction
2026-09-01	GATE6-CORR-001	pending	Exactly one Correction Agent root-cause audit/minimal verification-ownership correction 대기	needs-correction
2026-09-01	GATE6-CORR-001	passed	Owner corrected-for-implementation-rerun; Coordinator audit에서 correction scope가 corrections.md, Step 3–7 wording와 stale pending Step 3 timestamp 제거에 한정되고 source/tests/CMake/hooks/reference/upstream contract no-change, focused/reference strength와 single Stop full gate 유지 확인	needs-implementation
2026-09-01	GATE6-EVIDENCE-001	pending	Harness Step 7 completed, final Stop 362/362 PASS; reports의 post-hook historical evidence amendment 대기	needs-implementation
2026-09-01	GATE6-EVIDENCE-001	passed	Same Implementation Agent가 build-test.md와 implementation-report.md에 phase completion, automatic Stop build PASS, nonzero discovery, full 362/362 PASS, 0 failed와 evidence provenance를 기록함. Coordinator cross-report audit에서 focused 64/64, pressure reference 9/9, requirements 24/24, exact reference immutability와 pass-for-physics-evaluation 일치 확인	needs-physics-evaluation
2026-09-01	GATE7-PHYS-001	pending	Exactly one Physics Evaluation Agent의 independent physical plausibility evidence 대기	needs-physics-evaluation
2026-09-01	GATE7-PHYS-001	passed	Owner pass-for-release-agent; physics-evaluation.md가 documented pressure direction/sign, resultant/moment, reaction/equilibrium, symmetry/zero, follower objectivity/current-area, residual/nonfinite와 declared model coverage를 통과로 판정함. Coordinator audit에서 required sections, input handoff, 6.76e-14/3.72e-14 <= 1e-8, blocker 없음과 physics-only no-change 확인	needs-release
2026-09-01	GATE8-REL-001	pending	Exactly one Release Agent의 gate inventory, acceptance traceability, limitations와 closure recommendation 대기	needs-release

5. Risk, Blocker, and User-Decision Register

• active_blockers: 없음
• critical_user_questions: 없음
• USER-DECISION-001: resolved 2026-09-01; 7-Step draft, phase materialization, Harness implementation/verification execution 승인. --push는 승인되지 않음.
• USER-DECISION-002: resolved 2026-09-01; isolated linked recovery worktree와 해당 Executor process에 한정한 danger-full-access 승인. Original dirty workspace는 immutable backup으로 보존.
• RISK-008: Recovery Executor/commands의 workdir을 C:/git/FESADev/.worktrees/shell-surface-pressure-load-recovery로 고정하고 environment fallback을 process 종료 직후 제거한다.
• RISK-009: Pending Step agent가 full CTest를 실행하는 동안 Stop hook이 별도 full CTest를 시작하면 process overlap, timeout과 false failure가 발생한다. Agent는 RED+focused VERIFY, Stop hook은 single whole-project full VERIFY를 소유하도록 경계를 명시한다.
• RISK-001: Element-based *DLOAD pressure와 surface-based *DSLOAD pressure의 sign/target 의미를 혼합하지 않는다.
• RISK-002: Nonlinear follower pressure의 current-surface force와 external tangent를 fixed-global *CLOAD와 혼합하지 않는다.
• RISK-003: Reference artifact 또는 공통 tolerance를 기능 통과를 위해 수정하지 않는다.
• RISK-004: Directly applicable public S4/S4R follower-pressure target 부재는 analytical/tangent/equilibrium suite와 exact stored case를 함께 사용해 보완하며, target을 발명하지 않는다.
• RISK-005: External pressure tangent는 generally nonsymmetric이므로 symmetrize하지 않으며 Numerical Review가 global special-case evidence와 tau_J/FD acceptance를 확정한다.
• RISK-006: Stored case의 S4/SPOS/positive P coverage 한계는 S4R, side/sign, objectivity와 tangent blocking internal tests로 보완한다.
• RISK-007: Input compatibility는 assembly-level direct/explicit-instance ELSET surface와 parameterless DSLOAD P exact subset뿐이며 part-level/implicit qualification/DLOAD를 추정 지원하지 않는다.
• adopted_default: 승인 범위 내 secondary detail은 Abaqus surface-pressure behavior와 repository convention을 evidence-backed default로 사용한다.

6. Rework-Loop Control and Stop Condition

• normalized_failure_attempts: upstream-io-contract-mismatch 1회 교정 완료; environment/sandbox-msvc-filetracker-access-denied 1회 recovery routing 완료; harness-parallel-duplicate-full-verification-timeout 2회 관측, first Correction Agent response explicitly dispatched
• automatic_rework_limit: 동일 normalized failure classification 2회
• current_attempt: Gate 7 attempt 1 완료; Gate 8 attempt 1; post-hook-evidence-amendment 1회 완료; implementation Steps 1–7 완료; correction 1회 완료; implementation-planning 1회 완료; phase materialization 1회 완료; Gates 1–7 완료
• stop_condition: 동일 classification이 2회이면 자동 재작업을 중단하고 needs-user-decision 또는 blocked로 전환한다.

7. Final Workflow Closure

• closure_status: pending
• required_evidence: Gates 1–8 owner evidence와 release.md의 ready-for-release recommendation
• current_boundary: Gates 1–7 passed; Gate 8 Release Readiness active; final closure는 owner ready-for-release evidence 전 금지.

8. No-Change Assertion

• source_code: Gate 6 approved implementation에서 변경됨; Coordinator와 post-hook evidence amendment는 변경하지 않음
• tests: Gate 6 approved TDD implementation에서 변경됨; Coordinator와 post-hook evidence amendment는 변경하지 않음
• CMake: Gate 6 approved implementation에서 test registration 변경됨; Coordinator와 post-hook evidence amendment는 변경하지 않음
• reference_artifacts: 변경 없음
• tolerance_policies: 변경 없음
• phase_planning: phases/index.json에 pending entry append; phases/shell-surface-pressure-load/index.json과 step1.md–step7.md 생성
• recovery_baseline: Root가 isolated recovery worktree/branch와 baseline commit 2d07106을 준비하고 MSVC x64 Debug full baseline 302/302 PASS를 확인함
• correction_change: corrections.md 생성, Step 3–7 verification ownership 문구 최소 교정, pending Step 3 stale started_at 제거; source/tests/CMake/hooks/scripts/reference/tolerance/upstream docs 변경 없음
• coordinator_change: docs/shell-surface-pressure-load/coordination.md 생성 및 Gates 1–5와 Gate 6 planning evidence 기록
• specialist_change: Requirement Agent가 requirements.md, Research Agent가 research.md, Formulation Agent가 formulation.md, Numerical Review Agent가 numerical-review.md와 reference-model.md, I/O Definition Agent가 io.md, Implementation Planning Agent가 implementation-plan.md를 각각 생성함
• gate6_evidence_change: Implementation Agent가 implementation-report.md, build-test.md, reference-comparison.md를 완성하고 post-hook final Stop evidence를 report-only amendment로 반영함; reference/tolerance 변경 없음
• gate7_evidence_change: Physics Evaluation Agent가 physics-evaluation.md만 생성하고 existing HDF5/log/reference evidence를 read-only 감사함; source/tests/CMake/contracts/reference/tolerance/generated evidence 변경 없음