김경종
85 lines
5.2 KiB
Markdown
85 lines
5.2 KiB
Markdown
---
|
|
type: source
|
|
title: "Abaqus Analysis User's Guide Volume V"
|
|
source_type: user-guide
|
|
created: 2026-06-01
|
|
updated: 2026-06-01
|
|
address: c-000116
|
|
aliases:
|
|
- ABAQUS Analysis User's Guide Volume V
|
|
- ABAQUS 2016 Analysis User's Guide Volume V
|
|
- Abaqus Analysis User Guide 5
|
|
- Abaqus prescribed conditions constraints and interactions volume
|
|
tags:
|
|
- source
|
|
- finite-element-method
|
|
- abaqus
|
|
- user-guide
|
|
- boundary-conditions
|
|
- constraints
|
|
- contact
|
|
status: current
|
|
confidence: high
|
|
raw_path: ".raw/AbaqusAnalysisUserGuide5/"
|
|
source_files:
|
|
markdown_files: 97
|
|
markdown_bytes: 1960500
|
|
image_files: 720
|
|
image_bytes: 19399638
|
|
related:
|
|
- "[[ABAQUS]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-I|Abaqus Analysis User's Guide Volume I]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-II|Abaqus Analysis User's Guide Volume II]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-III|Abaqus Analysis User's Guide Volume III]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-IV|Abaqus Analysis User's Guide Volume IV]]"
|
|
- "[[Abaqus Prescribed Conditions and Amplitudes]]"
|
|
- "[[Abaqus Initial and Boundary Conditions]]"
|
|
- "[[Abaqus Loads and Predefined Fields]]"
|
|
- "[[Abaqus Kinematic Constraints and MPCs]]"
|
|
- "[[Abaqus Surface-Based Constraints and Couplings]]"
|
|
- "[[Abaqus Contact Interaction Definition]]"
|
|
- "[[Abaqus Contact Property Models]]"
|
|
- "[[Abaqus Cavity Radiation Interactions]]"
|
|
---
|
|
|
|
# Abaqus Analysis User's Guide Volume V
|
|
|
|
## Summary
|
|
|
|
Abaqus Analysis User's Guide Volume V covers the external-condition, constraint, and interaction layer of [[ABAQUS]]. Where [[Abaqus-Analysis-User-s-Guide-Volume-IV|Volume IV]] explains element selection, Volume V explains how the analyst prescribes initial states, boundary conditions, loads, fields, kinematic constraints, contact interactions, contact properties, contact algorithms, contact diagnostics, contact elements, and cavity radiation.
|
|
|
|
For this wiki, the source connects the model-definition layer from [[Abaqus-Analysis-User-s-Guide-Volume-I|Volume I]] to the nonlinear solution and contact theory already summarized in [[Abaqus Theory Manual]] and [[Finite Element Contact Formulation]].
|
|
|
|
## Scope
|
|
|
|
The ingested source covers Volume V: prescribed conditions, constraints, and interactions. The useful content starts at Chapter 34, "Prescribed Conditions," continues through Chapter 35, "Constraints," and then covers contact and cavity radiation through Chapters 36-41.
|
|
|
|
## Extracted Threads
|
|
|
|
- [[Abaqus Prescribed Conditions and Amplitudes]] - prescribed-condition classes, amplitude curves, step/ramp behavior, user-defined amplitudes, and local-coordinate prescribed data.
|
|
- [[Abaqus Initial and Boundary Conditions]] - initial values, Standard/Explicit/CFD boundary conditions, propagation, modification, and removal.
|
|
- [[Abaqus Loads and Predefined Fields]] - concentrated, distributed, thermal, electromagnetic, acoustic, pore-fluid, pretension, connector, and predefined-field workflows.
|
|
- [[Abaqus Kinematic Constraints and MPCs]] - linear constraint equations, multi-point constraints, user MPCs, and kinematic coupling.
|
|
- [[Abaqus Surface-Based Constraints and Couplings]] - tie constraints, distributing and kinematic couplings, shell-to-solid coupling, and surface-based constraint processing.
|
|
- [[Abaqus Embedded Elements and Overconstraints]] - embedded elements, element end release, overconstraint detection, and competing constraint/contact definitions.
|
|
- [[Abaqus Contact Interaction Definition]] - general contact and contact-pair definition in Abaqus/Standard and Abaqus/Explicit.
|
|
- [[Abaqus Contact Property Models]] - pressure-overclosure, damping, friction, user interfacial behavior, breakable bonds, thermal/electrical/pore-fluid contact.
|
|
- [[Abaqus Contact Formulations and Enforcement]] - node-to-surface, surface-to-surface, finite/small sliding, penalty, Lagrange multiplier, and augmented Lagrange enforcement.
|
|
- [[Abaqus Contact Diagnostics and Modeling Difficulties]] - initial overclosures, crossed surfaces, warped or coarse surfaces, redundant constraints, mass mismatch, and contact noise.
|
|
- [[Abaqus Standard Contact Elements]] - gap, tube-to-tube, slide line, and rigid surface contact elements in Abaqus/Standard.
|
|
- [[Abaqus Cavity Radiation Interactions]] - enclosure radiation, view factors, surface emissivity, open/closed cavities, symmetry, motion, and parallel decomposition.
|
|
|
|
## Connections
|
|
|
|
Volume V makes the boundary and interaction side of an Abaqus model explicit. [[Abaqus Input File Syntax]] separates model data from history data; this volume shows how conditions and interactions propagate through steps and how they interact with amplitudes, procedures, surfaces, sections, and output.
|
|
|
|
The source is also the strongest user-facing companion to [[Finite Element Contact Formulation]]. It expands contact from a theory topic into a modeling workflow: define surfaces, choose general contact or pairs, assign properties, select enforcement/formulation controls, diagnose overclosures or redundant constraints, and fall back to contact elements only for specialized Abaqus/Standard cases.
|
|
|
|
## Source Files
|
|
|
|
- Raw path: `.raw/AbaqusAnalysisUserGuide5/`
|
|
- Markdown chunks: 97
|
|
- Image assets: 720
|
|
- Composite hash: `7b45af852b94b3ae91b9d3cb0deaf8c73e5cea2674f1715f6a3ea16cbbd68729`
|
|
|