김경종
84 lines
5.3 KiB
Markdown
84 lines
5.3 KiB
Markdown
---
|
|
type: source
|
|
title: "Abaqus Analysis User's Guide Volume III"
|
|
source_type: user-guide
|
|
created: 2026-06-01
|
|
updated: 2026-06-01
|
|
address: c-000092
|
|
aliases:
|
|
- ABAQUS Analysis User's Guide Volume III
|
|
- ABAQUS 2016 Analysis User's Guide Volume III
|
|
- Abaqus Analysis User Guide 3
|
|
tags:
|
|
- source
|
|
- finite-element-method
|
|
- abaqus
|
|
- user-guide
|
|
- materials
|
|
- constitutive-modeling
|
|
status: current
|
|
confidence: high
|
|
raw_path: ".raw/AbaqusAnalysisUserGuide3/"
|
|
source_files:
|
|
markdown_files: 71
|
|
markdown_bytes: 1396389
|
|
image_files: 1088
|
|
image_bytes: 12877298
|
|
related:
|
|
- "[[ABAQUS]]"
|
|
- "[[Abaqus Theory Manual]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-I|Abaqus Analysis User's Guide Volume I]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-II|Abaqus Analysis User's Guide Volume II]]"
|
|
- "[[Abaqus Material Library and Data Definition]]"
|
|
- "[[Abaqus Elastic Material Models]]"
|
|
- "[[Abaqus Hyperelastic and Viscoelastic Materials]]"
|
|
- "[[Abaqus Metal Plasticity Models]]"
|
|
- "[[Abaqus Geomaterial and Concrete Plasticity]]"
|
|
- "[[Abaqus Progressive Damage and Failure]]"
|
|
- "[[Abaqus Hydrodynamic Equation of State Materials]]"
|
|
- "[[Abaqus Thermal Expansion and Damping Materials]]"
|
|
- "[[Abaqus Transport Acoustic and Electromagnetic Materials]]"
|
|
- "[[Abaqus Porous Media and Pore Fluid Materials]]"
|
|
- "[[Abaqus User-Defined Material Behavior]]"
|
|
---
|
|
|
|
# Abaqus Analysis User's Guide Volume III
|
|
|
|
## Summary
|
|
|
|
Abaqus Analysis User's Guide Volume III covers the materials layer of [[ABAQUS]]. Where [[Abaqus-Analysis-User-s-Guide-Volume-I|Volume I]] explains model definition and execution and [[Abaqus-Analysis-User-s-Guide-Volume-II|Volume II]] explains procedures and analysis techniques, Volume III explains how material behavior is defined and combined for finite element analysis.
|
|
|
|
For this wiki, the source expands the Abaqus thread from solver workflow into constitutive modeling practice: material data blocks, density, elastic models, hyperelasticity, viscoelasticity, plasticity, progressive damage, hydrodynamic equations of state, thermal and field properties, acoustic and diffusion properties, electromagnetic coupling, porous media, and user-defined material behavior.
|
|
|
|
## Scope
|
|
|
|
The ingested source covers Volume III: Part V, "Materials." The useful content starts after the cross-volume contents pages and runs through Chapters 21-26.
|
|
|
|
## Extracted Threads
|
|
|
|
- [[Abaqus Material Library and Data Definition]] - material blocks, material behavior combinations, temperature and field dependencies, distributions, and density.
|
|
- [[Abaqus Elastic Material Models]] - linear elasticity, no-compression/no-tension response, plane-stress orthotropic failure measures, porous elasticity, and hypoelasticity.
|
|
- [[Abaqus Hyperelastic and Viscoelastic Materials]] - rubberlike hyperelasticity, elastomeric foams, anisotropic hyperelasticity, Mullins softening, energy dissipation, time/frequency-domain viscoelasticity, hysteresis, and parallel rheological frameworks.
|
|
- [[Abaqus Metal Plasticity Models]] - Mises/Hill plasticity, cyclic hardening, rate effects, creep, annealing, anisotropy, Johnson-Cook, porous metal plasticity, cast iron, two-layer viscoplasticity, ORNL, and deformation plasticity.
|
|
- [[Abaqus Geomaterial and Concrete Plasticity]] - pressure-dependent plasticity for soils, rocks, crushable foams, jointed media, and concrete.
|
|
- [[Abaqus Progressive Damage and Failure]] - ductile metal damage, fiber-reinforced composite damage, low-cycle fatigue damage, damage evolution, element deletion, and mesh-objectivity controls.
|
|
- [[Abaqus Hydrodynamic Equation of State Materials]] - Mie-Gruneisen, tabulated, P-alpha, JWL explosive, ideal-gas, and user EOS models for Abaqus/Explicit.
|
|
- [[Abaqus Thermal Expansion and Damping Materials]] - Rayleigh damping, thermal expansion, field expansion, and viscosity material definitions.
|
|
- [[Abaqus Transport Acoustic and Electromagnetic Materials]] - thermal conductivity, specific heat, latent heat, acoustic media, mass diffusion, electrical conductivity, piezoelectricity, dielectric behavior, and magnetic permeability.
|
|
- [[Abaqus Porous Media and Pore Fluid Materials]] - permeability, porous bulk moduli, sorption, swelling gel, and moisture swelling for coupled pore-fluid/stress analyses.
|
|
- [[Abaqus User-Defined Material Behavior]] - UMAT, VUMAT, UMATHT, state variables, material Jacobians, element deletion flags, and built-in behavior combinations.
|
|
|
|
## Connections
|
|
|
|
Volume III is the strongest user-facing bridge between [[Abaqus Constitutive Integration]] and the keyword-level material library. It explains how the integration-point models seen in the [[Abaqus Theory Manual]] are selected, parameterized, combined, and extended in production input files.
|
|
|
|
The source also connects material modeling back to procedure choice. Hyperelastic near-incompressibility links to [[Hybrid Incompressible Elements]], damage and plasticity link to [[Nonlinear Finite Element Analysis]], thermal expansion links to [[Finite Element Thermal Stress Analysis]], and transport/electromagnetic/porous definitions link to [[Finite Element Heat Transfer and Field Problems]] and [[Abaqus Multiphysics Coupling and Co-simulation]].
|
|
|
|
## Source Files
|
|
|
|
- Raw path: `.raw/AbaqusAnalysisUserGuide3/`
|
|
- Markdown chunks: 71
|
|
- Image assets: 1088
|
|
- Composite hash: `1ed8caba282de5b2fc9f8b7508f58723957ad3bda345b1b3ccd42e1623a96b5a`
|
|
|