김경종
86 lines
5.2 KiB
Markdown
86 lines
5.2 KiB
Markdown
---
|
|
type: source
|
|
title: "Abaqus Analysis User's Guide Volume II"
|
|
source_type: user-guide
|
|
created: 2026-05-29
|
|
updated: 2026-05-29
|
|
address: c-000079
|
|
aliases:
|
|
- ABAQUS Analysis User's Guide Volume II
|
|
- ABAQUS 2016 Analysis User's Guide Volume II
|
|
- Abaqus Analysis User Guide 2
|
|
tags:
|
|
- source
|
|
- finite-element-method
|
|
- abaqus
|
|
- user-guide
|
|
- analysis-procedures
|
|
- analysis-techniques
|
|
status: current
|
|
confidence: high
|
|
raw_path: ".raw/AbaqusAnalysisUserGuide2/"
|
|
source_files:
|
|
markdown_files: 153
|
|
markdown_bytes: 3219251
|
|
image_files: 1061
|
|
image_bytes: 24598284
|
|
related:
|
|
- "[[ABAQUS]]"
|
|
- "[[Abaqus Theory Manual]]"
|
|
- "[[Abaqus-Analysis-User-s-Guide-Volume-I|Abaqus Analysis User's Guide Volume I]]"
|
|
- "[[Abaqus Analysis Procedures]]"
|
|
- "[[Abaqus General and Linear Perturbation Steps]]"
|
|
- "[[Abaqus Nonlinear Solution Control]]"
|
|
- "[[Abaqus Restart and Results Transfer]]"
|
|
- "[[Abaqus Substructuring and Submodeling]]"
|
|
- "[[Abaqus Matrix Generation and Reduced Models]]"
|
|
- "[[Abaqus Fracture and Enriched Discontinuity Modeling]]"
|
|
- "[[Abaqus Adaptivity and Mesh Replacement]]"
|
|
- "[[Abaqus Explicit Analysis Efficiency Techniques]]"
|
|
- "[[Abaqus Eulerian and Particle Methods]]"
|
|
- "[[Abaqus Multiphysics Coupling and Co-simulation]]"
|
|
- "[[Abaqus Structural Optimization and Parametric Studies]]"
|
|
- "[[Abaqus User Subroutines and Utility Routines]]"
|
|
---
|
|
|
|
# Abaqus Analysis User's Guide Volume II
|
|
|
|
## Summary
|
|
|
|
Abaqus Analysis User's Guide Volume II covers the procedure and analysis-technique layer of [[ABAQUS]]. Where [[Abaqus-Analysis-User-s-Guide-Volume-I|Volume I]] explains input files, spatial model definitions, execution, and output, Volume II explains which analysis procedures and continuation techniques are available after the model exists.
|
|
|
|
For this wiki, the source expands the Abaqus thread from operational setup into analysis strategy: general versus linear perturbation steps, nonlinear solution controls, static and dynamic procedures, restart and import, substructuring, submodeling, matrix generation, fracture and XFEM, adaptivity, Eulerian and particle methods, sequential coupling, co-simulation, user subroutines, optimization, design sensitivity, and parametric studies.
|
|
|
|
## Scope
|
|
|
|
The ingested source covers Volume II: Part III, "Analysis Procedures, Solution, and Control," and Part IV, "Analysis Techniques." The useful content starts after the cross-volume contents pages and runs through Chapters 6-20.
|
|
|
|
## Extracted Threads
|
|
|
|
- [[Abaqus General and Linear Perturbation Steps]] - step history, procedure selection, general steps, linear perturbation steps, multiple load cases, and direct/iterative linear solvers.
|
|
- [[Abaqus Nonlinear Solution Control]] - increments, iterations, Newton correction, residual convergence, stabilization, and transient time-integration accuracy controls.
|
|
- [[Abaqus Restart and Results Transfer]] - restart files, state transfer, Standard/Explicit import workflows, and springback-style continuation.
|
|
- [[Abaqus Substructuring and Submodeling]] - reduced substructures, retained degrees of freedom, local refined submodels, and global-to-local result transfer.
|
|
- [[Abaqus Matrix Generation and Reduced Models]] - linear perturbation matrix generation, SIM/text output, element-by-element matrices, and matrix exchange.
|
|
- [[Abaqus Fracture and Enriched Discontinuity Modeling]] - contour integrals, crack propagation, line springs, and XFEM enriched discontinuities.
|
|
- [[Abaqus Adaptivity and Mesh Replacement]] - ALE adaptive meshing, adaptive remeshing, and mesh-to-mesh solution mapping.
|
|
- [[Abaqus Explicit Analysis Efficiency Techniques]] - mass scaling, selective subcycling, and steady-state detection in Abaqus/Explicit.
|
|
- [[Abaqus Eulerian and Particle Methods]] - Eulerian volume fractions, coupled Eulerian-Lagrangian analysis, DEM, SPH, and particle generation.
|
|
- [[Abaqus Multiphysics Coupling and Co-simulation]] - built-in coupled procedures, sequential predefined fields, co-simulation, and Standard/Explicit domain partitioning.
|
|
- [[Abaqus Structural Optimization and Parametric Studies]] - topology, shape, sizing, bead optimization, design responses, sensitivity, and `ParStudy` workflows.
|
|
- [[Abaqus User Subroutines and Utility Routines]] - compiled C/C++/Fortran extension points, utility routines, external databases, and debugging constraints.
|
|
|
|
## Connections
|
|
|
|
This source is the strongest user-facing bridge between solver theory and production analysis planning. It connects [[Abaqus Analysis Procedures]] to [[Static Equilibrium Equation Solvers]], [[Direct Time Integration Methods]], [[Finite Element Eigenproblem Solvers]], [[Finite Element Heat Transfer and Field Problems]], and [[Finite Element Program Implementation]].
|
|
|
|
It also adds workflow-level detail around analysis continuation. [[Abaqus Restart and Results Transfer]] depends on the file and database concepts from [[Abaqus Output Database and Results Files]], while [[Abaqus Substructuring and Submodeling]] and [[Abaqus Matrix Generation and Reduced Models]] connect production Abaqus workflows to classical reduction, static condensation, and matrix assembly ideas.
|
|
|
|
## Source Files
|
|
|
|
- Raw path: `.raw/AbaqusAnalysisUserGuide2/`
|
|
- Markdown chunks: 153
|
|
- Image assets: 1061
|
|
- Composite hash: `58cef5bc8de1b0b82434c0d830c6d7ce103601e22d19637e76c83d75570a121b`
|
|
|